To Level Mower Housing

Craftsman 917.275283 To Level Mower Housing, SIDE-TO-SIDE Adjustment with Bubble Level

9.Position front plate assembly between front mower brackets. Raise deck and

plate assembly to align holes and insert flanged pins. Secure pins with double loop retainer springs between the plate assembly and mower brack- ets.

NOTE: To assist in locating hole in flanged pin, the hole in pin is inline with notch on head of pin. If necessary, move mower side-to-side to give space between plate and mower brackets.

IMPORTANT: Check belt for proper rout- ing in all mower pulley grooves.

10.Engage belt tension rod by pushing rod into locking bracket.

_,CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and en- gage slowly.

11.Connect anti-sway bar to chassis bracket under left footrest and retain

with double loop retainer spring.

12.If equipped, turn height adjustment knob clockwise to remove slack from

mower suspension.

13.Raise deck to highest position.

Adjust the mower while tractor is parked on level ground such as a carport or ga-

rage. Make sure tires are properly inflated (See "PRODUCT SPECIFICATIONS"

section of this manual). If tires are over or underinflated, you will not properly adjust your mower.

SIDE-TO-SIDE ADJUSTMENT WITH BUBBLE LEVEL

NOTE: If necessary, check side-to-side surface below tractor for levelness with a

long board and the bubble level.

•Using the lift lever, place mower in

position where no part of the mower, including gauge wheels, is touching the

ground.

•From left side of tractor, find the level

decal on top of mower and place bubble level on decal as indicated.

•Mower is level side-to-side when bubble is between the two lines in the bubble level.

•If adjustment is necessary, under left hand footrest, turn lift link adjustment nut (above yellow cap) in appropriate

direction to bring bubble between the lines in the bubble level.

•Remove bubble level from mower and store in a safe place.

Bubble Between

Level Decal

Brake .-_Left Hand Footrest

Pedal/"

Yellow Cap

ALTERNATE SIDE-TO-SIDE

ADJUSTMENT METHOD

•Raise mower to its highest position.

•Measure height from bottom edge of

mower to ground level at front corners of mower. Distance "A" on both sides of

mower should be the same.

•If adjustment is necessary, make adjust- ment on one side of mower only.

•To raise one side of mower, tighten lift link adjustment nut on that side.

•To lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

• Recheck measurements after adjusting.

Bottom	Edge of	Bottom Edge of
Mower	to Ground	Mower to Ground

(_\	Suspension
DO		--
I I		LiftLink
_	/	Adjustment
	__-	Nut

FRONT-TO-BACK ADJUSTMENT IMPORTANT: Deck must be level side- to-side. If the following front-to-back adjustment is necessary, be sure to adjust

both front links equally so mower will stay level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is approximately 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

917.275283 specifications

The Craftsman 917.275283 is a premium lawn tractor designed for homeowners seeking a reliable and efficient machine for maintaining their lawns. Built with a robust structure and advanced engineering, this lawn tractor offers a perfect blend of performance, comfort, and user-friendly features.

At the heart of the Craftsman 917.275283 is a powerful 24 HP Briggs & Stratton engine that ensures ample power for mowing, mulching, and hauling tasks. This engine is coupled with a hydrostatic transmission, providing smooth and effortless speed control while driving on various terrains. Operators can easily adjust their speed without the need for shifting gears, making it an ideal choice for those looking for convenience during their mowing sessions.

One of the standout features of this lawn tractor is its 42-inch cutting deck. This deck is designed to provide a wide cutting path, effectively reducing the number of passes needed to cover a lawn. The cutting height is adjustable, allowing users to customize the grass height according to their preference, resulting in a healthier and more aesthetically pleasing lawn. Additionally, the deck is crafted for easy cleaning, ensuring that maintenance is straightforward.

The Craftsman 917.275283 also incorporates advanced technology for enhanced mowing precision. The onboard SmartCut technology automatically adjusts the engine speed based on the grass thickness, allowing for optimal cutting efficiency. This feature not only improves performance but also extends engine life by reducing strain during operation.

Comfort is a key aspect of any lawn care equipment, and Craftsman does not disappoint. The tractor features an ergonomic seat with ample padding, ensuring a comfortable ride even during extended mowing sessions. The easy-to-reach controls are designed to prevent fatigue, allowing users to focus on their mowing tasks.

Safety features are also integrated into the design of the Craftsman 917.275283. The tractor comes equipped with a safety key, ensuring that the engine cannot be started while in gear. This is a critical feature that provides peace of mind, especially for those with children or pets nearby.

In summary, the Craftsman 917.275283 stands out in the market of lawn tractors with its powerful engine, user-friendly hydrostatic transmission, and advanced cutting technologies. Coupled with a comfortable design and essential safety features, this machine is tailored to meet the needs of homeowners looking to achieve a perfectly manicured lawn with ease and efficiency.