Craftsman 917.275283 owner manual Check Deck Levelness, Checktire Pressure, Check Brake System

Page 8

TO DRIVE TRACTOR OFF SKID (See Operation section for location and function of controls)

_WARNING: Before starting, read, un- derstand and follow all instructions in the

Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure

the area in front of tractor is clear of other people and objects.

1.Be sure all the above assembly steps have been completed.

2.Check engine oil level and fill fuel tank with gasoline.

3.Place freewheel control in "trans- mission engaged" position (See "To Transport" in the Operation section of this manual).

4.Sit on seat in operating position, de- press brake pedal and set the parking brake.

5.Press lift lever plunger and raise attachment lift lever to its highest posi- tion.

6.Start the engine. After engine has started, move throttle control to idle position.

7.Release parking brake.

8.Slowly move the motion control lever

forward and slowly drive tractor off skid.

9.Apply brake to stop tractor and set parking brake.

10.Turn ignition key to "STOP" position. Continue with the instructions that follow.

CHECKTIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Cor- rect tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" section

of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower hous-

ing should be properly leveled. See "TO LEVEL MOWER HOUSING" in the Service

and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replac- ing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your trac- tor, check to see that the brake is properly adjusted. See "TO ADJUST BRAKE" in

the Service and Adjustments section of this manual.

,/CHECKLIST

Before you operate your new tractor, we wish to assure that you receive the best performance and satisfaction from this Quality Product.

Please review the following checklist: ,/All assembly instructions have been

completed.

,/No remaining loose parts in carton. ,/Battery is properly prepared and

charged. (Minimum 1 hour at 6 amps). ,/Seat is adjusted comfortably and tight-

ened securely.

,/All tires are properly inflated. (For ship- ping purposes, the tires were overin- flated at the factory).

,/Be sure mower deck is properly leveled side-to-side/front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

,/Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

,/Check wiring. See that all connections are still secure and wires are properly clamped.

,/Before driving tractor, be sure freewheel control is in "transmission engaged" position (see "TO TRANSPORT" in the Operation section of this manual).

While learning how to use your tractor, pay

extra attention to the following important items:

,/Engine oil is at proper level.

,/Fuel tank is filled with fresh, clean, regu- lar unleaded gasoline.

,/Become familiar with all controls, their location and function. Operate them before you start the engine.

,/Be sure brake system is in safe operat- ing condition.

,/It is important to purge the transmission before operating your tractor for the first time. Follow proper starting and trans-

mission purging instructions (See "TO START ENGINE" and "PURGE TRANS-

MISSION" in the Operation section of this manual).

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents NFTZMnNl Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryGeneral Operation II. Slope OperationIV. Service Do notProduct Specifications GallonsUnleaded Type Above 32F SAE 5W-30 Below 32FSears Installation Service Customer ResponsibilitiesRepair Protection AgreementsHOW to SET UP Your Tractor Check BatteryTo Remove Tractor from Unpack CartonCheck Deck Levelness Checktire PressureCheck for Proper Position of ALL Belts Check Brake SystemH L I.,I Know Your Tractor HOW to USE Your Tractor To SET Parking BrakeEngine To USE Choke ControlTo Operate on Hills To Operate MowerTo Stop Mower Blades Transmission En Transmission Disengaged Before Starting the Engine Check Engine OIL LevelADD Gasoline To Start EngineAutomatictransmissionwarmup Mowing Tips Lubricate General RecommendationsBefore Each USE Battery Blade CareTransaxlecooling Transaxle Pump FluidBelts EngineAIR Filter Lower mower to its lowest position To Install MowerTractor To Remove Mower Alternate SIDE-TO-SIDE Adjustment Method To Level Mower HousingSIDE-TO-SIDE Adjustment with Bubble Level Mower Drive Belt Removal Mower Drive Belt InstallationTo Replace Mower Drive Belt Install NEW Mower Blade Secondary Drive Belt Reinstall Mower Drive BeltTo Replace Mower Blade SEC Ondary Drive Belt Remove Mower Drive BeltTo Replace Motion Drive Belt To Adjust Attachment ClutchTo Check and Adjust Brake Transmission Removal Replacement Front Wheel TOE-IN/CAMBERTo Remove Wheel for Repairs To Start Engine with a Weak BAT- TeryTo Remove Hood and Grill AS- Sembly Replacing BatteryTo Replace Headlight Lamp To Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor Preliminary SettingAcceleration Test Engine Remove mower from tractor for winterFuel System Engine OILCause Correction Troubleshooting ChartProblem Excessive VibrationEngine Continues To run whenProblem Cause Correction Tractor -- Model Number Schematic =FR , .,,, LECTR,CCLUTTractor -- Model Number Electrical KEY Part Description J13o Tractor -- Model Number 917.275283 Chassis and EnclosuresKEY Part Description Tractor -- Model Number Ground Drive KEY Part NO. NO.DESCRIPTION 47\ Tractor -- Model Number SteeringKEY Part Description Tractor -- Model Number EngineTractor -- Model Number Lift Assembly LiftVgtTractor -- Model Number Seat Assembly Wheels and Tires Tractor Model Number DecalsTractor -- Model Number Mower Deck Inches 1 inch = ¢,0 Tractor -- Model Number TRANSAXLE-MODEL Number 125THK\31 fJ HEAD/VALVE/BREATHER Crankcase KEY Part NO. no IGNITION/ELECTRICAL Blower Housing and Baffles IGNITION/ELECTRICAL Starting System J Engine Controls J Starting System OIL PAN/LUBRICATION KEY Part Description Exhaust J Crankshaft KEY Part Description Page Suggested Guide for Sighting Slopes for Safe Operation Get it fixed, at your home or ourst

917.275283 specifications

The Craftsman 917.275283 is a premium lawn tractor designed for homeowners seeking a reliable and efficient machine for maintaining their lawns. Built with a robust structure and advanced engineering, this lawn tractor offers a perfect blend of performance, comfort, and user-friendly features.

At the heart of the Craftsman 917.275283 is a powerful 24 HP Briggs & Stratton engine that ensures ample power for mowing, mulching, and hauling tasks. This engine is coupled with a hydrostatic transmission, providing smooth and effortless speed control while driving on various terrains. Operators can easily adjust their speed without the need for shifting gears, making it an ideal choice for those looking for convenience during their mowing sessions.

One of the standout features of this lawn tractor is its 42-inch cutting deck. This deck is designed to provide a wide cutting path, effectively reducing the number of passes needed to cover a lawn. The cutting height is adjustable, allowing users to customize the grass height according to their preference, resulting in a healthier and more aesthetically pleasing lawn. Additionally, the deck is crafted for easy cleaning, ensuring that maintenance is straightforward.

The Craftsman 917.275283 also incorporates advanced technology for enhanced mowing precision. The onboard SmartCut technology automatically adjusts the engine speed based on the grass thickness, allowing for optimal cutting efficiency. This feature not only improves performance but also extends engine life by reducing strain during operation.

Comfort is a key aspect of any lawn care equipment, and Craftsman does not disappoint. The tractor features an ergonomic seat with ample padding, ensuring a comfortable ride even during extended mowing sessions. The easy-to-reach controls are designed to prevent fatigue, allowing users to focus on their mowing tasks.

Safety features are also integrated into the design of the Craftsman 917.275283. The tractor comes equipped with a safety key, ensuring that the engine cannot be started while in gear. This is a critical feature that provides peace of mind, especially for those with children or pets nearby.

In summary, the Craftsman 917.275283 stands out in the market of lawn tractors with its powerful engine, user-friendly hydrostatic transmission, and advanced cutting technologies. Coupled with a comfortable design and essential safety features, this machine is tailored to meet the needs of homeowners looking to achieve a perfectly manicured lawn with ease and efficiency.
Top Page Image Contents