Craftsman 917.275283 owner manual Mowing Tips

Page 15

5.Move motion control lever to neutral

(N)position. Shutoff engine and set parking brake.

6.Engage transmission by placing free-

wheel control in engaged position (See "TO TRANSPORT' in this section of

manual).

7.Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. Disengage parking brake.

8.Slowly move motion control lever for- ward, after the tractor moves approxi- mately five (5) feet, slowly move motion

control lever to reverse position. After the tractor moves approximately five

(5)feet return the motion control lever to the neutral (N) position. Repeat this procedure with the motion control lever three (3) times.

Your transmission is now purged and now ready for normal operation.

MOWING TIPS

•Tire chains cannot be used when the mower housing is attached to tractor.

•Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the

Service and Adjustments section of this manual.

•The left hand side of mower should be used for trimming.

•Drive so that clippings are discharged onto the area that has already been

cut. Have the cut area to the right of the tractor. This will result in a more

even distribution of clippings and more uniform cutting.

•When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished.

f

I

=J

•If grass is extremely tall, it should be mowed twice to reduce load and pos- sible fire hazard from dried clippings.

Make first cut relatively high; the second to the desired height.

•Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

•Always operate engine at full throttle when mowing to assure better mow- ing performance and proper discharge of material. Regulate ground speed by selecting a low enough gear to give the

mower cutting performance as well as the quality of cut desired.

•When operating attachments, select a

ground speed that will suit the terrain and give best performance of the at-

tachment being used.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents NFTZMnNl Limited Warranty on Battery Limited Warranty on Craftsman Riding EquipmentII. Slope Operation General OperationDo not IV. ServiceAbove 32F SAE 5W-30 Below 32F Product SpecificationsGallons Unleaded TypeAgreements Sears Installation ServiceCustomer Responsibilities Repair ProtectionUnpack Carton HOW to SET UP Your TractorCheck Battery To Remove Tractor fromCheck Brake System Check Deck LevelnessChecktire Pressure Check for Proper Position of ALL BeltsH L I.,I Know Your Tractor To USE Choke Control HOW to USE Your TractorTo SET Parking Brake EngineTo Operate Mower To Stop Mower BladesTo Operate on Hills To Start Engine Transmission En Transmission DisengagedBefore Starting the Engine Check Engine OIL Level ADD GasolineAutomatictransmissionwarmup Mowing Tips General Recommendations Before Each USELubricate Blade Care BatteryEngine TransaxlecoolingTransaxle Pump Fluid BeltsAIR Filter To Install Mower Tractor To Remove MowerLower mower to its lowest position To Level Mower Housing SIDE-TO-SIDE Adjustment with Bubble LevelAlternate SIDE-TO-SIDE Adjustment Method Mower Drive Belt Installation To Replace Mower Drive BeltMower Drive Belt Removal Remove Mower Drive Belt Install NEW Mower Blade Secondary Drive BeltReinstall Mower Drive Belt To Replace Mower Blade SEC Ondary Drive BeltTo Adjust Attachment Clutch To Check and Adjust BrakeTo Replace Motion Drive Belt To Start Engine with a Weak BAT- Tery Transmission Removal ReplacementFront Wheel TOE-IN/CAMBER To Remove Wheel for RepairsReplacing Battery To Replace Headlight LampTo Remove Hood and Grill AS- Sembly Preliminary Setting To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorAcceleration Test Engine OIL EngineRemove mower from tractor for winter Fuel SystemTroubleshooting Chart ProblemCause Correction To run when ExcessiveVibration Engine ContinuesProblem Cause Correction =FR , .,,, LECTR,CCLUT Tractor -- Model Number SchematicTractor -- Model Number Electrical KEY Part Description Tractor -- Model Number 917.275283 Chassis and Enclosures J13oKEY Part Description Tractor -- Model Number Ground Drive KEY Part NO. NO.DESCRIPTION Tractor -- Model Number Steering 47\KEY Part Description Engine Tractor -- Model NumberLiftVgt Tractor -- Model Number Lift AssemblyTractor -- Model Number Seat Assembly Tractor Model Number Decals Wheels and TiresTractor -- Model Number Mower Deck Inches 1 inch = ¢,0 125THK Tractor -- Model Number TRANSAXLE-MODEL Number\31 fJ HEAD/VALVE/BREATHER Crankcase KEY Part NO. no IGNITION/ELECTRICAL Blower Housing and Baffles IGNITION/ELECTRICAL Starting System J Engine Controls J Starting System OIL PAN/LUBRICATION KEY Part Description Exhaust J Crankshaft KEY Part Description Page Suggested Guide for Sighting Slopes for Safe Operation Get it fixed, at your home or ourst

917.275283 specifications

The Craftsman 917.275283 is a premium lawn tractor designed for homeowners seeking a reliable and efficient machine for maintaining their lawns. Built with a robust structure and advanced engineering, this lawn tractor offers a perfect blend of performance, comfort, and user-friendly features.

At the heart of the Craftsman 917.275283 is a powerful 24 HP Briggs & Stratton engine that ensures ample power for mowing, mulching, and hauling tasks. This engine is coupled with a hydrostatic transmission, providing smooth and effortless speed control while driving on various terrains. Operators can easily adjust their speed without the need for shifting gears, making it an ideal choice for those looking for convenience during their mowing sessions.

One of the standout features of this lawn tractor is its 42-inch cutting deck. This deck is designed to provide a wide cutting path, effectively reducing the number of passes needed to cover a lawn. The cutting height is adjustable, allowing users to customize the grass height according to their preference, resulting in a healthier and more aesthetically pleasing lawn. Additionally, the deck is crafted for easy cleaning, ensuring that maintenance is straightforward.

The Craftsman 917.275283 also incorporates advanced technology for enhanced mowing precision. The onboard SmartCut technology automatically adjusts the engine speed based on the grass thickness, allowing for optimal cutting efficiency. This feature not only improves performance but also extends engine life by reducing strain during operation.

Comfort is a key aspect of any lawn care equipment, and Craftsman does not disappoint. The tractor features an ergonomic seat with ample padding, ensuring a comfortable ride even during extended mowing sessions. The easy-to-reach controls are designed to prevent fatigue, allowing users to focus on their mowing tasks.

Safety features are also integrated into the design of the Craftsman 917.275283. The tractor comes equipped with a safety key, ensuring that the engine cannot be started while in gear. This is a critical feature that provides peace of mind, especially for those with children or pets nearby.

In summary, the Craftsman 917.275283 stands out in the market of lawn tractors with its powerful engine, user-friendly hydrostatic transmission, and advanced cutting technologies. Coupled with a comfortable design and essential safety features, this machine is tailored to meet the needs of homeowners looking to achieve a perfectly manicured lawn with ease and efficiency.
Top Page Image Contents