Craftsman 917.275283 owner manual Blade Care, Battery

Page 17

TRACTOR

Always observe safety rules when per- forming any maintenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest

gear, then brake must be adjusted. (See "TO ADJUST BRAKE" in the Service and

Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires

(See "PRODUCT SPECIFICATIONS" section of this manual).

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant

may be purchased from your local parts

dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are working properly. If your trac- tor does not function as described, repair the problem immediately.

•The engine should not start unless

the brake pedal is fully depressed and attachment clutch control is in the disen-

gaged position.

•When the engine is running, any at- tempt by the operator to leave the seat

without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any at- tempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never op- erate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL

1.Raise mower to highest position to al- low access to blades.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

2.Remove blade bolt by turning counter- clockwise.

3.Install new or resharpened blade with stamped "THIS SIDE UP" facing deck and mandrel assembly.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4.Install and tighten blade bolt securely (45-55 Ft. Lbs. torque).

IMPORTANT: Special blade bolt is heat treated.

Assembly

Blade Bolt

Center Hol_

TO SHARPEN BLADE

NOTE: We do not recommend sharp-

ening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause

excessive vibration and eventual damage to mower and engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

5/8" Bolt

or

Center Hole

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. How-

ever, periodic charging of the battery with an automotive charger will extend its life.

•Keep battery and terminals clean.

•Keep battery bolts tight.

•Keep small vent holes open.

•Recharge at 6-10 amperes for 1 hour.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents NFTZMnNl Limited Warranty on Battery Limited Warranty on Craftsman Riding EquipmentII. Slope Operation General OperationDo not IV. ServiceGallons Product SpecificationsUnleaded Type Above 32F SAE 5W-30 Below 32FCustomer Responsibilities Sears Installation ServiceRepair Protection AgreementsCheck Battery HOW to SET UP Your TractorTo Remove Tractor from Unpack CartonChecktire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemH L I.,I Know Your Tractor To SET Parking Brake HOW to USE Your TractorEngine To USE Choke ControlTo Operate on Hills To Operate MowerTo Stop Mower Blades Before Starting the Engine Check Engine OIL Level Transmission En Transmission DisengagedADD Gasoline To Start EngineAutomatictransmissionwarmup Mowing Tips Lubricate General RecommendationsBefore Each USE Blade Care BatteryTransaxle Pump Fluid TransaxlecoolingBelts EngineAIR Filter Lower mower to its lowest position To Install MowerTractor To Remove Mower Alternate SIDE-TO-SIDE Adjustment Method To Level Mower HousingSIDE-TO-SIDE Adjustment with Bubble Level Mower Drive Belt Removal Mower Drive Belt InstallationTo Replace Mower Drive Belt Reinstall Mower Drive Belt Install NEW Mower Blade Secondary Drive BeltTo Replace Mower Blade SEC Ondary Drive Belt Remove Mower Drive BeltTo Replace Motion Drive Belt To Adjust Attachment ClutchTo Check and Adjust Brake Front Wheel TOE-IN/CAMBER Transmission Removal ReplacementTo Remove Wheel for Repairs To Start Engine with a Weak BAT- TeryTo Remove Hood and Grill AS- Sembly Replacing BatteryTo Replace Headlight Lamp To Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor Preliminary SettingAcceleration Test Remove mower from tractor for winter EngineFuel System Engine OILCause Correction Troubleshooting ChartProblem Vibration ExcessiveEngine Continues To run whenProblem Cause Correction =FR , .,,, LECTR,CCLUT Tractor -- Model Number SchematicTractor -- Model Number Electrical KEY Part Description Tractor -- Model Number 917.275283 Chassis and Enclosures J13oKEY Part Description Tractor -- Model Number Ground Drive KEY Part NO. NO.DESCRIPTION Tractor -- Model Number Steering 47\KEY Part Description Engine Tractor -- Model NumberLiftVgt Tractor -- Model Number Lift AssemblyTractor -- Model Number Seat Assembly Tractor Model Number Decals Wheels and TiresTractor -- Model Number Mower Deck Inches 1 inch = ¢,0 125THK Tractor -- Model Number TRANSAXLE-MODEL Number\31 fJ HEAD/VALVE/BREATHER Crankcase KEY Part NO. no IGNITION/ELECTRICAL Blower Housing and Baffles IGNITION/ELECTRICAL Starting System J Engine Controls J Starting System OIL PAN/LUBRICATION KEY Part Description Exhaust J Crankshaft KEY Part Description Page Suggested Guide for Sighting Slopes for Safe Operation Get it fixed, at your home or ourst

917.275283 specifications

The Craftsman 917.275283 is a premium lawn tractor designed for homeowners seeking a reliable and efficient machine for maintaining their lawns. Built with a robust structure and advanced engineering, this lawn tractor offers a perfect blend of performance, comfort, and user-friendly features.

At the heart of the Craftsman 917.275283 is a powerful 24 HP Briggs & Stratton engine that ensures ample power for mowing, mulching, and hauling tasks. This engine is coupled with a hydrostatic transmission, providing smooth and effortless speed control while driving on various terrains. Operators can easily adjust their speed without the need for shifting gears, making it an ideal choice for those looking for convenience during their mowing sessions.

One of the standout features of this lawn tractor is its 42-inch cutting deck. This deck is designed to provide a wide cutting path, effectively reducing the number of passes needed to cover a lawn. The cutting height is adjustable, allowing users to customize the grass height according to their preference, resulting in a healthier and more aesthetically pleasing lawn. Additionally, the deck is crafted for easy cleaning, ensuring that maintenance is straightforward.

The Craftsman 917.275283 also incorporates advanced technology for enhanced mowing precision. The onboard SmartCut technology automatically adjusts the engine speed based on the grass thickness, allowing for optimal cutting efficiency. This feature not only improves performance but also extends engine life by reducing strain during operation.

Comfort is a key aspect of any lawn care equipment, and Craftsman does not disappoint. The tractor features an ergonomic seat with ample padding, ensuring a comfortable ride even during extended mowing sessions. The easy-to-reach controls are designed to prevent fatigue, allowing users to focus on their mowing tasks.

Safety features are also integrated into the design of the Craftsman 917.275283. The tractor comes equipped with a safety key, ensuring that the engine cannot be started while in gear. This is a critical feature that provides peace of mind, especially for those with children or pets nearby.

In summary, the Craftsman 917.275283 stands out in the market of lawn tractors with its powerful engine, user-friendly hydrostatic transmission, and advanced cutting technologies. Coupled with a comfortable design and essential safety features, this machine is tailored to meet the needs of homeowners looking to achieve a perfectly manicured lawn with ease and efficiency.
Top Page Image Contents