To Start Engine

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

1.Be sure freewheel control is in the transmission engaged position.

2.Sit on seat in operating position, depress clutch/brake pedal and set parking brake.

3.Place motion control lever in neutral

(N)position.

4.Move attachment clutch to disengaged position.

5.Move throttle control to choke position. NOTE: Before starting, read the warm and cold starting procedures below.

6.Insert key into ignition and turn key clockwise to start position and release key as soon as engine starts. Do

not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, move throttle control to fast position, wait a few minutes and try

again. If engine still does not start, move the throttle control back to the

choke position and retry.

WARM WEATHER STARTING (50 ° F and above)

7.When engine starts, move the throttle control to the fast position.

•The attachments and ground drive can now be used. If the engine does not accept the load, restart the engine and

allow it to warm up for one minute using the choke as described above.

COLD WEATHER STARTING ( 50 ° F and below)

7.When engine starts, allow engine

to run with the throttle control in the choke position until the engine runs roughly, then move throttle control to fast position. This may require an engine warm-up period from several seconds to several minutes, depending on the temperature.

AUTOMATIC TRANSMISSION WARM UP

Before driving the unit in cold weather,

the transmission should be warmed up as follows:

1.Be sure the tractor is on level ground.

2.Place the motion control lever in neutral. Release the parking brake and let the clutch/brake slowly return to operating position.

3.Allow one minute for transmission to warm up. This can be done during

the engine warm up period.

• The attachments can also be used dur- ing the engine warm-up period after the transmission has been warmed up.

NOTE: If at a high altitude (above 3000

feet) or in cold temperatures (below 32 F) the carburetor fuel mixture may need to be adjusted for best engine performance.

(See "TO ADJUST CARBURETOR" in the Service and Adjustments section of this manual.)

PURGE TRANSMISSION

_IbCAUTION: Never engage or dis- engage freewheel lever while the engine is running.

To ensure proper operation and per-

formance, it is recommended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the trans- mission which may have developed during shipping of your tractor.

IMPORTANT: Should your transmission require removal for service or replace- ment, it should be purged after reinstall- ation before operating the tractor.

1.Place tractor safely on level surface with engine off and parking brake set.

2.Disengage transmission by placing freewheel control in disengaged posi-

tion (See "TO TRANSPORT" in this section of manual).

3.Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

4.Move motion control lever to full forward position and hold for five (5) seconds. Move lever to full reverse

position and hold for five (5) seconds. Repeat this procedure three (3) times.

NOTE: During this step there will be no movement of drive wheels. The air is being removed from hydraulic drive system.

917.274762 specifications

The Craftsman 917.274762 is a high-performance lawn tractor designed for residential homeowners who prioritize both efficiency and ease of use in their outdoor maintenance tasks. Equipped with a robust 24 HP Kohler engine, the 917.274762 provides ample power for tackling a variety of yard sizes and terrains, ensuring that grass cutting is both swift and efficient. With its reliable engine, this tractor can handle not just mowing but also light towing and hauling tasks around the yard.

One of the standout features of the Craftsman 917.274762 is its 42-inch cutting deck. This mid-sized deck strikes a perfect balance between maneuverability and cutting capability, making it suitable for both small and medium-sized lawns. The deck is equipped with a cutting height adjustment feature that allows users to choose from a variety of settings for a customizable cut, ensuring a clean and precise lawn finish every time. The deck's design promotes optimal grass collection, resulting in minimal clumping and a healthier lawn overall.

The user-friendly design of the tractor enhances the overall mowing experience. The control panel is intuitively placed, offering easy access to start, stop, and speed control features. Furthermore, the tractor features a comfortable, adjustable seat that provides ergonomic support for longer mowing sessions. For added convenience, the Craftsman 917.274762 boasts a tight turning radius, allowing users to navigate around trees, flowerbeds, and other landscape features with ease.

Safety is also a priority in the Craftsman 917.274762. The tractor comes equipped with an automatic blade brake, ensuring that the blades disengage when the operator leaves the seat, reducing the risk of accidents. Additionally, the sturdy construction and durable materials used in the tractor's design promise longevity and resilience against the wear and tear of regular use.

Overall, the Craftsman 917.274762 combines power, versatility, and comfort, making it an excellent choice for homeowners looking to maintain their lawns with ease. Its reliable engine, impressive cutting capabilities, and user-centric features make it a valuable asset in any outdoor toolkit. Whether you are mowing the lawn or tackling more demanding landscaping tasks, this lawn tractor is designed to meet a variety of needs with efficiency and style.