Craftsman 917.274762 owner manual AIR Filter, Clean AIR Screen, Engine Cooling System

Page 21

Oil Drain Valve

Closed and Locked Position

Yellow Cal:

Drain Tube

3.Unlock drain valve by pushing inward slightly and turning counterclockwise.

4.To open, pull out on the drain valve.

5.After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.

6.Remove the drain tube and replace the cap onto the end of the drain valve.

7.Refill engine with oil through oil fill dip- stick tube. Pour slowly. Do not overfill.

For approximate capacity see "PROD-

UCT SPECIFICATIONS" section of this manual.

8.Use gauge on oil fill cap/dipstick for checking level. For accurate reading, tighten dipstick cap securely onto the tube before removing dipstick. Keep oil at "FULl" line on dipstick. Tighten cap onto the tube securely when finished.

ENGINE OIL FILTER

Replace the engine oil filter every season or every other oil change if the tractor is used more than 100 hours in one year.

AIR FILTER

Your engine will not run properly using a dirty air filter. Replace pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every

100 hours of operation or every season, whichever occurs first.

Service air cleaner more often under dusty conditions.

1.Pull up on air filter cover handle and rotate towards engine.

2.Remove cover.

3.Carefully remove air filter cartridge and pre-cleaner from base.

4.Clean base carefully to prevent debris from falling into carburetor.

NOTE: If very dirty or damaged, replace cartridge.

5.Place new pre-cleaner and cartridge firmly in base.

6.Align tabs on cover with slots in blower housing and replace cover.

7.Hook handle on cover and push down on handle to close.

IMPORTANT: Petroleum solvents, such as kerosene, are not to be used to clean the cartridge. They may cause deterio- ration of the cartridge. Do not oil car- tridge. Do not use pressurized air to clean cartridge.

_ Handle

@Cover

Pre-clea_ee_ _artrldge

CLEAN AIR SCREEN

Air screen must be kept free of dirt and chaff to prevent engine damage from

overheating. Clean with a wire brush or compressed air to remove dirt and stub- born dried gum fibers.

ENGINE COOLING SYSTEM

Debris may clog the engine's air cool- ing system. Remove blower housing and clean area shown to prevent overheating and engine damage.

Air Screen

Clean out chaff and debris

 

21

Image 21
Contents Sears Craftsman Help Line IcrrftsmiihiLimited Warranty on Battery Limited Warranty on Craftsman Riding EquipmentGeneral Operation IwarningService IV, Towi NGSafe Handling of Gasoline General Service Sears Installation Service Customer ResponsibilitiesRepair Protection Agreements Keys Install Steering Wheel Tools Required for AssemblyInstall Seat Carton Unpack CartonOperation section for location Check BatteryCheck for Proper Position of ALL Belts ChecklistChecktire Pressure Check Deck LevelnessUnlocked Tractor Lift Lever Plunger Used to releaseReverse Operation System ROS on Position Allows operation To Adjust Mower Cutting Height HOW to USE YourTo SET Parking Brake To Move Forward and BackwardTo Adjust Gauge Wheels Operating in ReverseTo Operate Mower Transmission Engaged Transmission Disengaged To TransportTowing Carts and Other Attach Ments ADD GasolineAutomatic Transmission Warm UP To Start EngineMowing Tips To TransportROS General RecommendationsOperator Presence System Reverse Operation System ROS TractorBlade Care To Sharpen BladeBattery Clean AIR Screen AIR FilterEngine Cooling System Muffler CleaningSpark Plugs IN-LINE Fuel FilterTo Remove Mower To Install MowerSIDE-TO-SIDE Adjustment To Level Mower HousingBelt Installation To Replace Mower Blade Drive BeltTo Adjust Brake To Check and Adjust BrakeTo Check Brake To Replace Motion Drive BeltTransmission Removal Replacement Transaxle Motion Control LE VER Neutral AdjustmentMent To Remove Wheel for RepairsDo not short battery Replacing BatteryTo Replace Headlight Bulb To Remove Hood and Grill AS SemblyTo Adjust Carburetor To Adjust Throttle Control CablePreliminary Setting EngineFuel System Engine OILCylinders Loss of power ProblemCause Correction StartProblem Cause Correction Troubleshooting ChartProblem Cause Correction Tractor - Model Number SchematicElectrical Part Description Electrical KEYTractor - Model Number 917,274762 Chassis and Enclosures KEY Part Description Tractor - Model Number 917.274762 Chassis and EnclosuresTractor - Model Number 917,274762 Ground Drive Part Description Tractor Model NumberTractor - Model Number 917,274762 Steering Assembly Tractor - Model Number 917.274762 Steering Assembly Spark Arrester Engine Optional Equipment180166 Tractor - Model Number Seat AssemblyWheels Tires Decals16 1718 Tractor - Model Number 917,274762 Lift Assembly15868 185 Tractor - Model Number 917,274762 Mower Deck117 119 113TUV Tractor - Model Number Mower DeckZN c O Model Number Hydro Transaxle20@ 616 1127NIKKIJ All component Dimensions Given in U.S. inches Inch = 25.4 mm Set Only Ride UP and Down Hill Not Across HillDegrees MAX Iiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiii Our Home

917.274762 specifications

The Craftsman 917.274762 is a high-performance lawn tractor designed for residential homeowners who prioritize both efficiency and ease of use in their outdoor maintenance tasks. Equipped with a robust 24 HP Kohler engine, the 917.274762 provides ample power for tackling a variety of yard sizes and terrains, ensuring that grass cutting is both swift and efficient. With its reliable engine, this tractor can handle not just mowing but also light towing and hauling tasks around the yard.

One of the standout features of the Craftsman 917.274762 is its 42-inch cutting deck. This mid-sized deck strikes a perfect balance between maneuverability and cutting capability, making it suitable for both small and medium-sized lawns. The deck is equipped with a cutting height adjustment feature that allows users to choose from a variety of settings for a customizable cut, ensuring a clean and precise lawn finish every time. The deck's design promotes optimal grass collection, resulting in minimal clumping and a healthier lawn overall.

The user-friendly design of the tractor enhances the overall mowing experience. The control panel is intuitively placed, offering easy access to start, stop, and speed control features. Furthermore, the tractor features a comfortable, adjustable seat that provides ergonomic support for longer mowing sessions. For added convenience, the Craftsman 917.274762 boasts a tight turning radius, allowing users to navigate around trees, flowerbeds, and other landscape features with ease.

Safety is also a priority in the Craftsman 917.274762. The tractor comes equipped with an automatic blade brake, ensuring that the blades disengage when the operator leaves the seat, reducing the risk of accidents. Additionally, the sturdy construction and durable materials used in the tractor's design promise longevity and resilience against the wear and tear of regular use.

Overall, the Craftsman 917.274762 combines power, versatility, and comfort, making it an excellent choice for homeowners looking to maintain their lawns with ease. Its reliable engine, impressive cutting capabilities, and user-centric features make it a valuable asset in any outdoor toolkit. Whether you are mowing the lawn or tackling more demanding landscaping tasks, this lawn tractor is designed to meet a variety of needs with efficiency and style.