Craftsman 917.274762 owner manual To Remove Mower, To Install Mower

Page 23

WARNING:SERVICE ORTOADJUSTMENTS:AVOIDSERIOUS INJURY, BEFORE PERFORMING ANY

1.Depress clutch/brake pedal fully and set parking brake.

2.Place motion control lever in neutral (N) position.

3.Place attachment clutch in "DISENGAGED" position.

4.Turn ignition key to "STOP" and remove key.

5.Make sure the blades and all moving parts have completely stopped.

6.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER

Mower will be easier to remove from the right side of tractor.

1.Place attachment clutch in "DISEN- GAGED" position.

2.Move attachment lift lever forward to lower mower to its lowest position.

3.Roll belt off engine pulley.

4.Remove small retainer spring, and remove clutch spring off pulley bolt.

5.Remove large retainer spring, slide

collar off and push housing guide out of bracket.

6.Disconnect anti-sway bar from chassis bracket by removing retainer spring.

7.Disconnect suspension arms from rear deck brackets by removing retainer springs.

8.Disconnect front links from deck by removing retainer springs.

9.Raise lift lever to raise suspension

arms. Slide mower out from under trac- tor.

Small Retainer Spring

Clutch Spring

Small Retainer

Clutch Spring

S

Retainer

Spring

Anti-Sway

Bar

Housing

Guide

Retainer Spring

IMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front links and hook the clutch spring Into square hole in frame.

TO INSTALL MOWER

1.Raise attachment lift lever to its highest position.

2.Slide mower under tractor with deflec- tor shield to right side of tractor.

3.Lower lift lever to its lowest position.

4.Connect front links to mower deck and secure with retainer springs.

5.Connect suspension arms to rear deck brackets and secure with retainer

springs.

6.Connect anti-sway bar to chassis bracket and secure with retainer spring.

7.Push clutch cable housing guide into bracket, slide collar onto guide and secure with large retainer spring.

Engine

Pulley

Retainer Springs

(Both Sides)

Deflector

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Sears Craftsman Help Line IcrrftsmiihiLimited Warranty on Battery Limited Warranty on Craftsman Riding EquipmentGeneral Operation IwarningSafe Handling of Gasoline ServiceIV, Towi NG General Service Repair Protection Agreements Sears Installation ServiceCustomer Responsibilities Keys Carton Unpack Carton Tools Required for AssemblyInstall Steering Wheel Install SeatOperation section for location Check BatteryCheck Deck Levelness ChecklistCheck for Proper Position of ALL Belts Checktire PressureUnlocked Reverse Operation System ROS on Position Allows operation TractorLift Lever Plunger Used to release To Move Forward and Backward HOW to USE YourTo Adjust Mower Cutting Height To SET Parking BrakeTo Operate Mower To Adjust Gauge WheelsOperating in Reverse ADD Gasoline To TransportTransmission Engaged Transmission Disengaged Towing Carts and Other Attach MentsAutomatic Transmission Warm UP To Start EngineMowing Tips To TransportROS General RecommendationsTo Sharpen Blade TractorOperator Presence System Reverse Operation System ROS Blade CareBattery Engine Cooling System Clean AIR ScreenAIR Filter IN-LINE Fuel Filter CleaningMuffler Spark PlugsTo Remove Mower To Install MowerTo Replace Mower Blade Drive Belt To Level Mower HousingSIDE-TO-SIDE Adjustment Belt InstallationTo Replace Motion Drive Belt To Check and Adjust BrakeTo Adjust Brake To Check BrakeTo Remove Wheel for Repairs Transaxle Motion Control LE VER Neutral AdjustmentTransmission Removal Replacement MentTo Remove Hood and Grill AS Sembly Replacing BatteryDo not short battery To Replace Headlight BulbEngine To Adjust Throttle Control CableTo Adjust Carburetor Preliminary SettingCylinders Fuel SystemEngine OIL Start ProblemLoss of power Cause CorrectionProblem Cause Correction Troubleshooting ChartProblem Cause Correction Tractor - Model Number SchematicElectrical Part Description Electrical KEYTractor - Model Number 917,274762 Chassis and Enclosures KEY Part Description Tractor - Model Number 917.274762 Chassis and EnclosuresTractor - Model Number 917,274762 Ground Drive Part Description Tractor Model NumberTractor - Model Number 917,274762 Steering Assembly Tractor - Model Number 917.274762 Steering Assembly Spark Arrester Engine Optional Equipment180166 Tractor - Model Number Seat AssemblyWheels Tires Decals16 1718 Tractor - Model Number 917,274762 Lift Assembly113 Tractor - Model Number 917,274762 Mower Deck15868 185 117 119TUV Tractor - Model Number Mower DeckZN c O Model Number Hydro Transaxle20@ 616 1127NIKKIJ All component Dimensions Given in U.S. inches Inch = 25.4 mm Set Degrees MAX Only Ride UP and Down HillNot Across Hill Iiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiii Our Home

917.274762 specifications

The Craftsman 917.274762 is a high-performance lawn tractor designed for residential homeowners who prioritize both efficiency and ease of use in their outdoor maintenance tasks. Equipped with a robust 24 HP Kohler engine, the 917.274762 provides ample power for tackling a variety of yard sizes and terrains, ensuring that grass cutting is both swift and efficient. With its reliable engine, this tractor can handle not just mowing but also light towing and hauling tasks around the yard.

One of the standout features of the Craftsman 917.274762 is its 42-inch cutting deck. This mid-sized deck strikes a perfect balance between maneuverability and cutting capability, making it suitable for both small and medium-sized lawns. The deck is equipped with a cutting height adjustment feature that allows users to choose from a variety of settings for a customizable cut, ensuring a clean and precise lawn finish every time. The deck's design promotes optimal grass collection, resulting in minimal clumping and a healthier lawn overall.

The user-friendly design of the tractor enhances the overall mowing experience. The control panel is intuitively placed, offering easy access to start, stop, and speed control features. Furthermore, the tractor features a comfortable, adjustable seat that provides ergonomic support for longer mowing sessions. For added convenience, the Craftsman 917.274762 boasts a tight turning radius, allowing users to navigate around trees, flowerbeds, and other landscape features with ease.

Safety is also a priority in the Craftsman 917.274762. The tractor comes equipped with an automatic blade brake, ensuring that the blades disengage when the operator leaves the seat, reducing the risk of accidents. Additionally, the sturdy construction and durable materials used in the tractor's design promise longevity and resilience against the wear and tear of regular use.

Overall, the Craftsman 917.274762 combines power, versatility, and comfort, making it an excellent choice for homeowners looking to maintain their lawns with ease. Its reliable engine, impressive cutting capabilities, and user-centric features make it a valuable asset in any outdoor toolkit. Whether you are mowing the lawn or tackling more demanding landscaping tasks, this lawn tractor is designed to meet a variety of needs with efficiency and style.
Top Page Image Contents