MAINTENANCE | BEFORE | EVERY | ||
| SCHEDULE | EACH | 8 | |
|
|
| USE | HOURS |
Check | Brake Operation | _ | _" | |
Check | Tire | Pressure | _ |
|
T Check | Operator | Presence & ROS | System_ |
|
EVERY | EVERY | EVERY | EVERY | BEFORE |
25 | 50 | 100 | SEASON | STORAGE |
HOURS | HOURS | HOURS |
|
|
A Check for Loose Fasteners
C ChecWReplace Mower Blades T Lubrication Chart
0 Check Battery Level
R Clean Battery and Terminals
Check Transaxle Cooling
Check Mower Levelness
Check
Check Engine Oil Level
Change Engine Oil (with oil filter)
t# #
v' v'
v'v"
v' | v' |
v' |
|
_1,2
Change Engine Oil (without oil filter
_ Clean Air Filter
(3 Clean Air Screen
Inspect Muffler/Spark Arrester
NReplace Oil Filter (If equipped) E Clean Engine Cooling Fins
Replace Spark Plug
Replace Air Filter Paper Cartridge
mRR_place Fuel Filter
1- Change more often when operating under a heavy load or in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain tractor as instructed in this manual.
Some adjustments will need to be made pe- riodically to properly maintain your tractor. At least once a season, check to see if you should make any of the adjustments
described in the Service and Adjustments section of this manual.
•At least once a year you should replace the spark plug, clean or replace air filter, and check blades and belts for wear. A new spark plug and clean air filter ensure proper
BEFORE EACH USE
1.Check engine oil level.
2.Check brake operation.
3.Check tire pressure.
4.Check operator presence and ROS systems for proper operation.
5.Check for loose fasteners.
_16#1,2
v'
v'2
v'
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with
| LUBRICATION | CHART |
(_ Spindle | ||
Zerk |
| Zerk |
|
| Front Wheel |
(_ Front Wheel | Bearing zerk | |
Bearing | zerk | Engine |
|
| |
(_ Steering |
| |
Sector | Gear |
|
Teeth |
|
|
_General Purpose Grease
@Refer to Maintenance "ENGINE" Section
iMPORTANT: Do not oil or grease the pivot points which have special nylon bearings. Viscous lubricants will attract dust and dirt that will shorten the life of the
16