Craftsman 917.273642 To Adjust Gauge Wheels, To Operate Mower, To Operate on Hills, To Transport

Page 14

TO ADJUST GAUGE WHEELS

Gauge wheels are properly adjusted

when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions. NOTE: Be sure tractor is on a flat level surface.

1.Lower mower and adjust mower to de-

sired cutting height(See "TO ADJUST MOWER CUTTING HEIGHT" in this

section of manual).

2.Remove retainer spring and clevis pin which secure each gauge wheel bar.

3.Lower gauge wheels to ground. Raise gauge wheels slightly to align holes in bracket and gauge wheel bar and insert clevis pin. Gauge wheels should be slightly off the ground.

4.Replace retainer spring into clevis pin.

5.Be sure all gauge wheels are in the same setting.

IMPORTANT: Be sure to readjust gauge wheels if you change the cutting height of the mower deck.

Retainer

Spring

Clevis

Pin

_- Z J"

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equip- ment on rough, rolling terrain or hills.

1.Select desired height of cut.

2.Start mower blades by engaging at- tachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

_I, CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

Attachment Clutch Switch

Attachemnt

Pull Out To "Engage"Lift Lever High

Position

"'J"4 Low

Position

Shield

_eflector

TO OPERATE ON HILLS

_L,WARNING: Do not drive up or down hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide at the back of this manual.

•Choose the slowest speed before start- ing up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake posi- tion and engage parking brake.

•Move motion control lever to neutral (N)

position.

IMPORTANT: The motion control lever does not return to neutral (N) position when the clutch/brake pedal is depressed.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Slowly move motion control lever to slowest setting.

•Make all turns slowly.

TO TRANSPORT

When pushing or towing your tractor, be sure to disengage transmission by placing

freewheel control in freewheeling position. Freewheel control is located at the rear drawbar of tractor.

1.Raise attachment lift to highest posi- tion with attachment lift control.

2.Pull freewheel control out and down into the slot and release so it is held in

the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To re-engage transmission, reverse above procedure.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Criiftsmhn Limitedwarrantyon Craftsmanridingequipment General Operation II. Slope Operation Service Safe Handling of GasolineIII. Children General Service Repair Protection Agreements Sears Installation ServiceCustomer Responsibilities For Future Use To Drive Tractor OFF Skid HOW to SET UP Your Tractor Check BatteryAdjust Seat Unpack CartonCheck for Proper Position ALL Belts Reposition Right Rear Gauge WheelDischarging Check Brake SystemChecklist @@@@ Tractor Stopping To Adjust Mower Cutting HeightTo SET Parking Brake To USE Throttle ControlTo Operate on Hills To Adjust Gauge WheelsTo Operate Mower To TransportADD Gasoline Towing Carts and Other Attach MentsBefore Starting the Engine Check Engine OIL Level Automatic Transmission Warm UP Purge TransmissionMulching Mowing Tips Mowing TipsMaintenance Schedule General RecommendationsOperator Presence System BatteryTractor Blade CareTransaxle Pump Fluid Engine LubricationEngine Cooling System Engine OIL FilterAIR Filter MufflerTo Remove Mower To Install MowerDisengaged FRONT-TO-BACK Adjustment To Level Mower HousingSIDE-TO-SIDE Adjustment with Bubble Level To Replace Mower Blade Drive Belt To Check and Adjust BrakeBoth Front Links Must be Equal Length To Replace Motion Drive Belt Lever Neutral AdjustmentReplacement Transaxle Motion ControlTo Remove Wheel for Repairs To Adjust Steering Wheel AlignmentReplacing Battery Interlocks and Relays To Adjust Throttle Control CableTo Replace Headlight Bulb To Replace FuseFinal Setting To Adjust CarburetorPreliminary Setting Acceleration TestCylinders Engine Fuel SystemEngine OIL OtherStart ProblemCause Correction Loss of power CauseProblemcause CorrectionSchematic Tractor - Model NumberElectrical Electrical KEY Part DescriptionTractor - Model Number 917,273642 Chassis and Enclosures Part Description Tractor - Model Number Ground Drive Tractor -- Model Number Ground Drive KEY Part DescriptionTractor - Model Number 917.273642 Steering Assembly KEY Part Description Tractor - Model Number 917,273642 EngineTractor - Model Number Seat Assembly KEY PartDecals Wheels Tires KEYTractor - Model Number 917,273642 Lift Assembly 144 ,.....4s Tractor - Model Number 917,273642 Mower DeckTractor - Model Number Mower Deck STDPage Tractor - Model Number Hydro Geartransaxle -- Model Number 750x.625783J Tractor Model Number Briggs ENGINE-MODEL Number 31P777, Type Number 0348-E1105137 276 Dimensions Given in U.S. inches Page Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXYour Home

917.273642 specifications

The Craftsman 917.273642 is a riding lawn mower designed to combine efficiency, power, and user comfort for homeowners managing sizable lawn areas. This model stands out as an essential gardening tool, specifically engineered to make mowing tasks simpler and more enjoyable.

One of the main features of the Craftsman 917.273642 is its robust 19.5 HP Briggs & Stratton engine. This powerful engine ensures reliable starting and sufficient power to tackle tough grass and larger terrains. The mower also incorporates a smooth-running automatic transmission, allowing users to shift seamlessly between different speeds while maintaining control and stability.

Another key characteristic of this riding mower is its 42-inch cutting deck. This mid-sized deck provides an optimal balance between cutting efficiency and maneuverability, especially in tight spots or around obstacles. The deck is equipped with a six-position height adjustment system, enabling users to customize the cutting height according to the specific requirements of their lawn.

The Craftsman 917.273642 also features an innovative debris management system with side discharge capability, allowing clippings to be expelled directly to the side, providing a cleaner cut and reducing the need for bagging. For added convenience, the model is equipped with optional mulching capabilities, enabling users to finely chop grass clippings and return them to the lawn as natural fertilizer.

User comfort is paramount in the design of the Craftsman 917.273642. The mower incorporates a spacious and ergonomically designed seat, featuring a high back for enhanced support, ensuring users can operate the machine for extended periods without discomfort. The easy-to-reach controls are strategically located on the dashboard, allowing for a user-friendly experience.

In addition to its impressive features, the Craftsman 917.273642 comes with durability in mind. The heavy-duty steel frame and reinforced deck ensure that the mower can withstand the rigors of frequent use while providing a long life span.

Overall, the Craftsman 917.273642 is more than just a lawn mower. It represents a blend of modern technology, user-centric design, and the durability that the Craftsman brand is well known for, making it a valuable addition to any homeowner's gardening toolkit. Whether you have a small yard or a larger landscape, this riding mower is designed to meet your landscaping needs with precision and ease.
Top Page Image Contents