Craftsman 917.273642 Both Front Links Must be Equal Length, To Replace Mower Blade Drive Belt

Page 24

Mandrel

"D ....D"

BOTH FRONT LINKS MUST BE EQUAL IN

LENGTH

Front Links

TO REPLACE MOWER BLADE DRIVE BELT

The mower blade drive belt may be re- placed without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

1.Remove mower from tractor (See "TO REMOVE MOWER" in this section of

manual).

2.Work belt off both mandrel pulleys and idler pulleys.

3.Pull belt away from mower.

BELT INSTALLATION -

1.Work belt around both mandrel pulleys and idler pulleys

2.Make sure belt is in all pulley grooves and inside all belt guides.

3.Install mower (See "To Install Mower" in this section of this manual).

Mandrel Pulley

Idler Pulleys

Mandrel

Pulley

TO CHECK AND ADJUST BRAKE

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

1.Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and engage parking brake.

2.Disengage transmission by placing

freewheel control in "transmission dis-

engaged" position. Pull freewheel con- trol out and into the slot and release so

it is held in the disengaged position. The rear wheels must lock and skid when you try to manually push the tractor for- ward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

1.Depress clutch/brake pedal all the way down and engage parking brake.

2.Measure distance between brake oper- ating arm and nut "A" on brake rod.

3.If distance is other than 1-9/16", loosen jam nut and turn nut "A" until distance becomes 1-9/16". Retighten jam nut against nut "A".

4.Engage transmission by placing freewheel control in "transmission

engaged" position.

5.Road test tractor for proper stopping distance as stated above. Readjust

if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is neces- sary. Replace brake pads or contact a Sears or other qualified service center.

With parking brake "Engaged"

Arm

Do not touch this nut. If further brake adjustment is necessary contact a Sears or other qualified service center.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Criiftsmhn Limitedwarrantyon Craftsmanridingequipment General Operation Service Safe Handling of Gasoline III. ChildrenII. Slope Operation General Service Sears Installation Service Customer ResponsibilitiesRepair Protection Agreements For Future Use HOW to SET UP Your Tractor Check Battery Adjust SeatTo Drive Tractor OFF Skid Unpack CartonReposition Right Rear Gauge Wheel DischargingCheck for Proper Position ALL Belts Check Brake SystemChecklist @@@@ Tractor To Adjust Mower Cutting Height To SET Parking BrakeStopping To USE Throttle ControlTo Adjust Gauge Wheels To Operate MowerTo Operate on Hills To TransportTowing Carts and Other Attach Ments Before Starting the Engine Check Engine OIL LevelADD Gasoline Automatic Transmission Warm UP Purge TransmissionMulching Mowing Tips Mowing TipsMaintenance Schedule General RecommendationsBattery TractorOperator Presence System Blade CareTransaxle Pump Fluid Engine LubricationEngine OIL Filter AIR FilterEngine Cooling System MufflerTo Install Mower DisengagedTo Remove Mower To Level Mower Housing SIDE-TO-SIDE Adjustment with Bubble LevelFRONT-TO-BACK Adjustment To Check and Adjust Brake Both Front Links Must be Equal LengthTo Replace Mower Blade Drive Belt Lever Neutral Adjustment ReplacementTo Replace Motion Drive Belt Transaxle Motion ControlTo Adjust Steering Wheel Alignment Replacing BatteryTo Remove Wheel for Repairs To Adjust Throttle Control Cable To Replace Headlight BulbInterlocks and Relays To Replace FuseTo Adjust Carburetor Preliminary SettingFinal Setting Acceleration TestEngine Fuel System Engine OILCylinders OtherProblem Cause CorrectionStart Loss of power CauseProblemcause CorrectionSchematic Tractor - Model NumberElectrical Electrical KEY Part DescriptionTractor - Model Number 917,273642 Chassis and Enclosures Part Description Tractor - Model Number Ground Drive Tractor -- Model Number Ground Drive KEY Part DescriptionTractor - Model Number 917.273642 Steering Assembly KEY Part Description Tractor - Model Number 917,273642 EngineTractor - Model Number Seat Assembly KEY PartDecals Wheels Tires KEYTractor - Model Number 917,273642 Lift Assembly 144 ,.....4s Tractor - Model Number 917,273642 Mower DeckTractor - Model Number Mower Deck STDPage Tractor - Model Number Hydro Geartransaxle -- Model Number 750x.625783J Tractor Model Number Briggs ENGINE-MODEL Number 31P777, Type Number 0348-E1105137 276 Dimensions Given in U.S. inches Page Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXYour Home

917.273642 specifications

The Craftsman 917.273642 is a riding lawn mower designed to combine efficiency, power, and user comfort for homeowners managing sizable lawn areas. This model stands out as an essential gardening tool, specifically engineered to make mowing tasks simpler and more enjoyable.

One of the main features of the Craftsman 917.273642 is its robust 19.5 HP Briggs & Stratton engine. This powerful engine ensures reliable starting and sufficient power to tackle tough grass and larger terrains. The mower also incorporates a smooth-running automatic transmission, allowing users to shift seamlessly between different speeds while maintaining control and stability.

Another key characteristic of this riding mower is its 42-inch cutting deck. This mid-sized deck provides an optimal balance between cutting efficiency and maneuverability, especially in tight spots or around obstacles. The deck is equipped with a six-position height adjustment system, enabling users to customize the cutting height according to the specific requirements of their lawn.

The Craftsman 917.273642 also features an innovative debris management system with side discharge capability, allowing clippings to be expelled directly to the side, providing a cleaner cut and reducing the need for bagging. For added convenience, the model is equipped with optional mulching capabilities, enabling users to finely chop grass clippings and return them to the lawn as natural fertilizer.

User comfort is paramount in the design of the Craftsman 917.273642. The mower incorporates a spacious and ergonomically designed seat, featuring a high back for enhanced support, ensuring users can operate the machine for extended periods without discomfort. The easy-to-reach controls are strategically located on the dashboard, allowing for a user-friendly experience.

In addition to its impressive features, the Craftsman 917.273642 comes with durability in mind. The heavy-duty steel frame and reinforced deck ensure that the mower can withstand the rigors of frequent use while providing a long life span.

Overall, the Craftsman 917.273642 is more than just a lawn mower. It represents a blend of modern technology, user-centric design, and the durability that the Craftsman brand is well known for, making it a valuable addition to any homeowner's gardening toolkit. Whether you have a small yard or a larger landscape, this riding mower is designed to meet your landscaping needs with precision and ease.
Top Page Image Contents