Craftsman 917.273642 Engine OIL Filter, AIR Filter, Engine Cooling System, Muffler, Spark Plugs

Page 21

ENGINE OIL FILTER

Replace the engine oil filter every season or every other oil change if the tractor is used more than 100 hours in one year.

AIR FILTER

Your engine will not run properly using a dirty air filter. Replace pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every

100 hours of operation or every season, whichever occurs first.

Service air cleaner more often under dusty conditions.

1.Pull up on air filter cover handle and rotate towards engine.

2.Remove cover.

3.Carefully remove air filter cartridge and pre-cleaner from base.

4.Clean base carefully to prevent debris

from falling into carburetor.

NOTE: If very dirty or damaged, replace cartridge.

5.Place new pre-cleaner and cartridge firmly in base.

6.Align tabs on cover with slots in blower housing and replace cover.

7.Hook handle on cover and push down on handle to close.

IMPORTANT: Petroleum solvents, such as kerosene, are not to be used to clean the cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean cartridge.

Cover

ge

CLEAN AIR SCREEN

Air screen must be kept free of dirt and chaff to prevent engine damage from

overheating. Clean with a wire brush or compressed air to remove dirt and stub- born dried gum fibers.

ENGINE COOLING SYSTEM

Debris may clog the engine's air cool- ing system. Remove blower housing and clean area shown to prevent overheating and engine damage.

Clean out chaff and debris

Air Screen

MUFFLER

Inspect and replace corroded muffler and spark arrester (if equipped) as it could cre- ate a fire hazard and/or damage.

SPARK PLUG(S)

Replace spark plug(s) at the beginning of each mowing season or after every 100 hours of operation, whichever occurs

first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS"

section of this manual.

IN-LINE FUEL FILTER

The fuel filter should be replaced once each season. If fuel filter becomes

clogged, obstructing fuel flow to carbu- retor, replacement is required.

1.With engine cool, remove filter and plug fuel line sections.

2.Place new fuel filter in position in fuel line with arrow pointing towards carbu- retor.

3.Be sure there are no fuel line leaks and clamps are properly positioned.

4.Immediately wipe up any spilled gaso- line.

Clamp__clamp

Base

Fuel Filter

Slots

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Criiftsmhn Limitedwarrantyon Craftsmanridingequipment General Operation Service Safe Handling of Gasoline III. ChildrenII. Slope Operation General Service Sears Installation Service Customer ResponsibilitiesRepair Protection Agreements For Future Use Adjust Seat HOW to SET UP Your Tractor Check BatteryTo Drive Tractor OFF Skid Unpack CartonDischarging Reposition Right Rear Gauge WheelCheck for Proper Position ALL Belts Check Brake SystemChecklist @@@@ Tractor To SET Parking Brake To Adjust Mower Cutting HeightStopping To USE Throttle ControlTo Operate Mower To Adjust Gauge WheelsTo Operate on Hills To TransportTowing Carts and Other Attach Ments Before Starting the Engine Check Engine OIL LevelADD Gasoline Purge Transmission Automatic Transmission Warm UPMowing Tips Mulching Mowing TipsGeneral Recommendations Maintenance ScheduleTractor BatteryOperator Presence System Blade CareEngine Lubrication Transaxle Pump FluidAIR Filter Engine OIL FilterEngine Cooling System MufflerTo Install Mower DisengagedTo Remove Mower To Level Mower Housing SIDE-TO-SIDE Adjustment with Bubble LevelFRONT-TO-BACK Adjustment To Check and Adjust Brake Both Front Links Must be Equal LengthTo Replace Mower Blade Drive Belt Replacement Lever Neutral AdjustmentTo Replace Motion Drive Belt Transaxle Motion ControlTo Adjust Steering Wheel Alignment Replacing BatteryTo Remove Wheel for Repairs To Replace Headlight Bulb To Adjust Throttle Control CableInterlocks and Relays To Replace FusePreliminary Setting To Adjust CarburetorFinal Setting Acceleration TestEngine OIL Engine Fuel SystemCylinders OtherProblem Cause CorrectionStart Cause Loss of powerCorrection ProblemcauseTractor - Model Number SchematicElectrical Part Description Electrical KEYTractor - Model Number 917,273642 Chassis and Enclosures Part Description Tractor - Model Number Ground Drive KEY Part Description Tractor -- Model Number Ground DriveTractor - Model Number 917.273642 Steering Assembly KEY Part Description Engine Tractor - Model Number 917,273642KEY Part Tractor - Model Number Seat AssemblyWheels Tires KEY DecalsTractor - Model Number 917,273642 Lift Assembly Tractor - Model Number 917,273642 Mower Deck 144 ,.....4sSTD Tractor - Model Number Mower DeckPage 750x.625 Tractor - Model Number Hydro Geartransaxle -- Model Number783J Briggs ENGINE-MODEL Number 31P777, Type Number 0348-E1 Tractor Model Number105137 276 Dimensions Given in U.S. inches Page Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationYour Home

917.273642 specifications

The Craftsman 917.273642 is a riding lawn mower designed to combine efficiency, power, and user comfort for homeowners managing sizable lawn areas. This model stands out as an essential gardening tool, specifically engineered to make mowing tasks simpler and more enjoyable.

One of the main features of the Craftsman 917.273642 is its robust 19.5 HP Briggs & Stratton engine. This powerful engine ensures reliable starting and sufficient power to tackle tough grass and larger terrains. The mower also incorporates a smooth-running automatic transmission, allowing users to shift seamlessly between different speeds while maintaining control and stability.

Another key characteristic of this riding mower is its 42-inch cutting deck. This mid-sized deck provides an optimal balance between cutting efficiency and maneuverability, especially in tight spots or around obstacles. The deck is equipped with a six-position height adjustment system, enabling users to customize the cutting height according to the specific requirements of their lawn.

The Craftsman 917.273642 also features an innovative debris management system with side discharge capability, allowing clippings to be expelled directly to the side, providing a cleaner cut and reducing the need for bagging. For added convenience, the model is equipped with optional mulching capabilities, enabling users to finely chop grass clippings and return them to the lawn as natural fertilizer.

User comfort is paramount in the design of the Craftsman 917.273642. The mower incorporates a spacious and ergonomically designed seat, featuring a high back for enhanced support, ensuring users can operate the machine for extended periods without discomfort. The easy-to-reach controls are strategically located on the dashboard, allowing for a user-friendly experience.

In addition to its impressive features, the Craftsman 917.273642 comes with durability in mind. The heavy-duty steel frame and reinforced deck ensure that the mower can withstand the rigors of frequent use while providing a long life span.

Overall, the Craftsman 917.273642 is more than just a lawn mower. It represents a blend of modern technology, user-centric design, and the durability that the Craftsman brand is well known for, making it a valuable addition to any homeowner's gardening toolkit. Whether you have a small yard or a larger landscape, this riding mower is designed to meet your landscaping needs with precision and ease.
Top Page Image Contents