Craftsman 917.273392 manual Check Deck Levelness

Page 10

INSTALL MULCHER PLATE

(If previously removed)

1.Raise and hold deflector shield in upright position.

2.Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

3.Hook front latch into hole on front of mower deck.

4.Hook rear latch into hole on back of mower deck.

Deflector

Mulcher

Shield

Plate

 

Latch

Hooks

AHi,CAUTION: Do not remove deflector shield from mower.

TO CONVERTTO BAGGING OR

DISCHARGING

Simply remove mulcher plate and store in a safe place.Your mower is now ready for discharging or installation of optional grass catcher accessory.

NOTE: It is not necessary to change

blades. The mulcher blades are designed for discharging and bagging also.

CHECK TIRE PRESSURE

The tires on your tractor were overin- flated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower hous- ing should be properly leveled. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replac- ing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are

routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your trac- tor, check to see that the brake is properly adjusted. See "TO ADJUST BRAKE" in

the Service and Adjustments section of this manual.

JCHECKLIST

Before you operate and enjoy your new tractor, we wish to assure that you receive the best performance and satisfaction from this Quality Product.

Please review the following checklist: ,/All assembly instructions have been

completed.

,/No remaining loose parts in carton. ,/Battery is properly prepared and

charged. (Minimum 1 hour at 6 amps). ,/Seat is adjusted comfortably and tight-

ened securely.

,/All tires are properly inflated. (For ship- ping purposes, the tires were overin- flated at the factory).

,/Be sure mower deck is properly leveled side-to-side/front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

,/Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

,/Check wiring. See that all connections are still secure and wires are properly clamped.

While learning how to use your tractor, pay

extra attention to the following important items:

,/Engine oil is at proper level.

,/Fuel tank is filled with fresh, clean, regu- lar unleaded gasoline.

,/Become familiar with all controls - their

location and function. Operate them before you start the engine.

,/Be sure brake system is in safe oper- ating condition.

10

Image 10
Contents Jcriiftsmiinj Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryGeneral Operation II. Slope OperationIV. Service Do notPage U1R Product SpecificationsSears Installation Service Customer ResponsibilitiesSeat Steering WheelKeys Install Seat HOW to SET UP YOU R TractorTools Required for Assembly To Remove Tractor fromCheck Battery Check Deck Levelness @@@@@ Know Your Tractor Attachment Clutch Lever UsedTo USE Throttle Control HOW to USE Your TractorTo SET Parking Brake Always operate engine at full throttleTowing Carts and Other Attach Ments To Operate On HillsTo Transport Before Starting the EngineTo Start Engine ADD GasolineMowing Tips Mulching Mowing TipsGeneral Recommendations Lubrication ChartBefore Each USE Tractor Blade RemovalTransaxle Cooling BatteryEngine BeltsEngine OIL Filter Clean AIR ScreenAIR Filter Engine Cooling SystemTractor CleaningTo Install Mower To Remove MowerTo Level Mower Housing SIDE-TO-SIDE AdjustmentBelt Removal Belt InstallationTo Check and Adjust Brake To Check BrakeTo Start Engine with a Weak BAT- Tery Transaxle Gear Shift Lever NEU- Tral AdjustmentFront Wheel TOE-IN/CAMBER To Attach Jumper CablesTo Replace Fuse Replacing BatteryInterlocks and Relays To Remove Hood and Grill AS- SemblyPreliminary Setting To Adjust Throttle Control CableTo Adjust Carburetor Final SettingFuel System BatteryRemove mower from tractor for winter Engine OILIgnition switch Troubleshooting ChartHard to start Engine will not turn over Excessive Problem Cause CorrectionLoss of power VibrationDischarge CorrectionHeadlights not Working If so equipped Tractor - Model Number Schematic 0LAoKTractor - Model Number ElectricalTractor - Model Number Electrical KEY Part DescriptionTractor - Model Number Chassis and Enclosures Tractor - Model Number Chassis and Enclosures Tractor - Model Number Ground Drive 875 Inches 1 inch = 25.4 mm Tractor - Model Number 917.273392 Steering Assembly Tractor - Model Number 917.273392 Steeringassembly Engine Tractor - Model Number 917.273392 Seat Assembly KEY PartTractor - Model Number Decals RH StltTractor - Model Number Lift Assembly Tractor - Model Number Mower Deck KEY Part Description Numbers Here Part Description 515 O25 4-d O47 % Tractor Model Number 917.273392309 693551 Motor-Starter 868 690968 Page Page Suggested Guide for Sighting Slopes for Safe Operation Get it fixed, at your home or ours

917.273392 specifications

The Craftsman 917.273392 is a robust and versatile lawn mower designed to meet the needs of homeowners who value efficiency, performance, and convenience. This model combines power and user-friendly features to ensure an optimal mowing experience.

One of the standout features of the Craftsman 917.273392 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, it delivers exceptional cutting performance, making it ideal for various lawn types and sizes. The engine’s overhead valve design enhances fuel efficiency and provides better torque.

The cutting deck is another impressive aspect of this lawn mower. It features a wide 42-inch cutting deck that allows for quicker mowing of large areas. The deck is equipped with a dual-blade system, which guarantees a clean and precise cut. Additionally, the adjustable cutting height gives users the flexibility to choose their preferred grass length, accommodating different lawn care preferences.

In terms of convenience, the Craftsman 917.273392 does not disappoint. The mower includes a hydrostatic transmission, which provides seamless shifting without the need for a clutch. This feature ensures a smooth operation, allowing the user to focus on mowing rather than managing gears. The ergonomic design of the control panel enhances user comfort, with easy-to-reach levers for controlling speed and cutting height.

Safety is also a priority in the Craftsman 917.273392 design. The mower is equipped with a safety switch that automatically shuts off the engine when the operator leaves the seat, preventing accidents and enhancing peace of mind during operation.

Another valuable characteristic of this mower is its mulching capability. The optional mulching kit enables users to finely chop grass clippings, returning nutrients back to the soil, which can improve lawn health over time. The rear bagger option adds further versatility, allowing for efficient collection and disposal of grass clippings.

Maintenance has been made simpler with the inclusion of easy-access features. The mower deck can be easily cleaned without having to reach underneath, and regular maintenance tasks such as oil changes are straightforward.

Overall, the Craftsman 917.273392 combines power, versatility, and user-centric design elements, making it a reliable choice for homeowners looking to maintain a well-manicured lawn with ease.