Craftsman 917.273392 manual Do not, IV. Service

Page 4

DO:

Mow up and down slopes, not across.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Un- even terrain could overturn the machine.

Tall grass can hide obstacles.

Use slow speed. Choose a low gear so that you will not have to stop or shift while on the slope.

Follow the manufacturer's recommend- ations for wheel weights or counter- weights to improve stability.

Use extra care with grass catchers or other attachments. These can change

the stability of the machine.

Keep all movement on the slopes slow and gradual Do not make sudden

changes in speed or direction.

Avoid starting or stopping on a slope. If tires lose traction, disengage the blades and proceed slowly straight down the

slope.

DO NOT:

Do not turn on slopes unless neces- sary, and then, turn slowly and gradually downhill, if possible.

Do not mow near drop-offs, ditches, or embankments. The mower could

suddenly turn over if a wheel is over

the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced traction could cause sliding.

Do not try to stabilize the machine by putting your foot on the ground.

Do not use grass catcher on steep slopes.

III, CHILDREN

Tragic accidents can occur if the operator

is not alert to the presence of children. Children are often attracted to the ma-

chine and the mowing activity. Neveras-

sume that children will remain where you last saw them.

Keep children out of the mowing area and under the watchful care of another

responsible adult.

Be alert and turn machine off if children enter the area.

Before and when backing, look behind and down for small children.

Never carry children. They may fall off and be seriously injured or interfere with safe machine operation.

Never allow children to operate the machine.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

IV. SERVICE

Use extra care in handling gasoline and

other fuels. They are flammable and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel with the engine running. Allow

engine to cool before refueling. Do not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel container inside where there is an open flame, such as a water heater.

Never run a machine inside a closed area.

Keep nuts and bolts, especially blade attachment bolts, tight and keep equip- ment in good condition.

Never tamper with safety devices. Check their proper operation regularly.

Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage. Allow machine to cool before storing.

Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

Never make adjustments or repairs with the engine running.

Grass catcher components are subject

to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently

check components and replace with manufacturer's recommended parts,

when necessary.

Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

Check brake operation frequently. Ad- just and service as required.

4

Image 4
Contents Jcriiftsmiinj Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryGeneral Operation II. Slope OperationIV. Service Do notPage Product Specifications Sears Installation ServiceU1R Customer ResponsibilitiesSeat Steering WheelKeys HOW to SET UP YOU R Tractor Tools Required for AssemblyInstall Seat To Remove Tractor fromCheck Battery Check Deck Levelness @@@@@ Know Your Tractor Attachment Clutch Lever UsedHOW to USE Your Tractor To SET Parking BrakeTo USE Throttle Control Always operate engine at full throttleTo Operate On Hills To TransportTowing Carts and Other Attach Ments Before Starting the EngineTo Start Engine ADD GasolineMowing Tips Mulching Mowing TipsGeneral Recommendations Lubrication ChartBefore Each USE Tractor Blade RemovalBattery EngineTransaxle Cooling BeltsClean AIR Screen AIR FilterEngine OIL Filter Engine Cooling SystemCleaning To Install MowerTractor To Remove MowerTo Level Mower Housing SIDE-TO-SIDE AdjustmentBelt Installation To Check and Adjust BrakeBelt Removal To Check BrakeTransaxle Gear Shift Lever NEU- Tral Adjustment Front Wheel TOE-IN/CAMBERTo Start Engine with a Weak BAT- Tery To Attach Jumper CablesReplacing Battery Interlocks and RelaysTo Replace Fuse To Remove Hood and Grill AS- SemblyTo Adjust Throttle Control Cable To Adjust CarburetorPreliminary Setting Final SettingBattery Remove mower from tractor for winterFuel System Engine OILIgnition switch Troubleshooting ChartHard to start Engine will not turn over Problem Cause Correction Loss of powerExcessive VibrationDischarge CorrectionHeadlights not Working If so equipped Tractor - Model Number Schematic 0LAoKTractor - Model Number ElectricalTractor - Model Number Electrical KEY Part DescriptionTractor - Model Number Chassis and Enclosures Tractor - Model Number Chassis and Enclosures Tractor - Model Number Ground Drive 875 Inches 1 inch = 25.4 mm Tractor - Model Number 917.273392 Steering Assembly Tractor - Model Number 917.273392 Steeringassembly Engine Tractor - Model Number 917.273392 Seat Assembly KEY PartTractor - Model Number Decals RH StltTractor - Model Number Lift Assembly Tractor - Model Number Mower Deck KEY Part Description Numbers Here Part Description 515 O25 4-d O47 % Tractor Model Number 917.273392309 693551 Motor-Starter 868 690968 Page Page Suggested Guide for Sighting Slopes for Safe Operation Get it fixed, at your home or ours

917.273392 specifications

The Craftsman 917.273392 is a robust and versatile lawn mower designed to meet the needs of homeowners who value efficiency, performance, and convenience. This model combines power and user-friendly features to ensure an optimal mowing experience.

One of the standout features of the Craftsman 917.273392 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, it delivers exceptional cutting performance, making it ideal for various lawn types and sizes. The engine’s overhead valve design enhances fuel efficiency and provides better torque.

The cutting deck is another impressive aspect of this lawn mower. It features a wide 42-inch cutting deck that allows for quicker mowing of large areas. The deck is equipped with a dual-blade system, which guarantees a clean and precise cut. Additionally, the adjustable cutting height gives users the flexibility to choose their preferred grass length, accommodating different lawn care preferences.

In terms of convenience, the Craftsman 917.273392 does not disappoint. The mower includes a hydrostatic transmission, which provides seamless shifting without the need for a clutch. This feature ensures a smooth operation, allowing the user to focus on mowing rather than managing gears. The ergonomic design of the control panel enhances user comfort, with easy-to-reach levers for controlling speed and cutting height.

Safety is also a priority in the Craftsman 917.273392 design. The mower is equipped with a safety switch that automatically shuts off the engine when the operator leaves the seat, preventing accidents and enhancing peace of mind during operation.

Another valuable characteristic of this mower is its mulching capability. The optional mulching kit enables users to finely chop grass clippings, returning nutrients back to the soil, which can improve lawn health over time. The rear bagger option adds further versatility, allowing for efficient collection and disposal of grass clippings.

Maintenance has been made simpler with the inclusion of easy-access features. The mower deck can be easily cleaned without having to reach underneath, and regular maintenance tasks such as oil changes are straightforward.

Overall, the Craftsman 917.273392 combines power, versatility, and user-centric design elements, making it a reliable choice for homeowners looking to maintain a well-manicured lawn with ease.