Craftsman 917.273392 manual Check Battery

Page 9

5.Pivot seat and pan forward and as- semble adjustment knob and flat washer loosely. Do not tighten.

6.Lower seat into operating position and sit in seat.

7.Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

8.Get off seat without moving its ad- justed position.

9.Raise seat and tighten adjustment knob securely.

Seat I

Shoulder

Bolts

Adjustment Knob

CHECK BATTERY

1.Lift seat pan to raised position. NOTE: If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instruc- tions).

Seat

Label

Terminal

NOTE: You may now roll or drive your

tractor off the skid. Follow the appropriate instruction below to remove the tractor

from the skid.

TO ROLL TRACTOR OFF SKID (See

Operation section for location and function of controls)

1.Press lift lever plunger and raise

attachment lift lever to its highest po- sition.

2.Release parking brake by depressing clutch/brake pedal.

3.Place gearshift lever in neutral (N) position.

4.Roll tractor forward off skid.

5.Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See

Operation section for location and function of controls)

_WARNING: Before starting, read, un- derstand and follow all instructions in the

Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other

people and objects.

1.Be sure all the above assembly steps have been completed.

2.Check engine oil level and fill fuel tank with gasoline.

3.Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

4.Place gear shift lever in neutral (N) position.

5.Press lift lever plunger and raise

attachment lift lever to its highest posi- tion.

6.Start the engine. After engine has started, move throttle control to idle position.

7.Depress clutch/brake pedal into full "BRAKE" position and hold. Move gear- shift lever to 1st gear.

8.Slowly release clutch/brake pedal and slowly drive tractor off skid.

9.Apply brake to stop tractor, set park- ing brake and place gearshift lever in

neutral position.

10.Turn ignition key to "STOP" position. Continue with the instructions that follow.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Jcriiftsmiinj Limited Warranty on Battery Limited Warranty on Craftsman Riding EquipmentII. Slope Operation General OperationDo not IV. ServicePage Sears Installation Service Product SpecificationsU1R Customer ResponsibilitiesSteering Wheel SeatKeys Tools Required for Assembly HOW to SET UP YOU R TractorInstall Seat To Remove Tractor fromCheck Battery Check Deck Levelness @@@@@ Attachment Clutch Lever Used Know Your TractorTo SET Parking Brake HOW to USE Your TractorTo USE Throttle Control Always operate engine at full throttleTo Transport To Operate On HillsTowing Carts and Other Attach Ments Before Starting the EngineADD Gasoline To Start EngineMulching Mowing Tips Mowing TipsLubrication Chart General RecommendationsBefore Each USE Blade Removal TractorEngine BatteryTransaxle Cooling BeltsAIR Filter Clean AIR ScreenEngine OIL Filter Engine Cooling SystemTo Install Mower CleaningTractor To Remove MowerSIDE-TO-SIDE Adjustment To Level Mower HousingTo Check and Adjust Brake Belt InstallationBelt Removal To Check BrakeFront Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever NEU- Tral AdjustmentTo Start Engine with a Weak BAT- Tery To Attach Jumper CablesInterlocks and Relays Replacing BatteryTo Replace Fuse To Remove Hood and Grill AS- SemblyTo Adjust Carburetor To Adjust Throttle Control CablePreliminary Setting Final SettingRemove mower from tractor for winter BatteryFuel System Engine OILTroubleshooting Chart Ignition switchHard to start Engine will not turn over Loss of power Problem Cause CorrectionExcessive VibrationCorrection DischargeHeadlights not Working If so equipped 0LAoK Tractor - Model Number SchematicElectrical Tractor - Model NumberKEY Part Description Tractor - Model Number ElectricalTractor - Model Number Chassis and Enclosures Tractor - Model Number Chassis and Enclosures Tractor - Model Number Ground Drive 875 Inches 1 inch = 25.4 mm Tractor - Model Number 917.273392 Steering Assembly Tractor - Model Number 917.273392 Steeringassembly Engine KEY Part Tractor - Model Number 917.273392 Seat AssemblyRH Stlt Tractor - Model Number DecalsTractor - Model Number Lift Assembly Tractor - Model Number Mower Deck KEY Part Description Numbers Here Part Description 515 O25 4-d O47 % 917.273392 Tractor Model Number309 693551 Motor-Starter 868 690968 Page Page Suggested Guide for Sighting Slopes for Safe Operation Get it fixed, at your home or ours

917.273392 specifications

The Craftsman 917.273392 is a robust and versatile lawn mower designed to meet the needs of homeowners who value efficiency, performance, and convenience. This model combines power and user-friendly features to ensure an optimal mowing experience.

One of the standout features of the Craftsman 917.273392 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, it delivers exceptional cutting performance, making it ideal for various lawn types and sizes. The engine’s overhead valve design enhances fuel efficiency and provides better torque.

The cutting deck is another impressive aspect of this lawn mower. It features a wide 42-inch cutting deck that allows for quicker mowing of large areas. The deck is equipped with a dual-blade system, which guarantees a clean and precise cut. Additionally, the adjustable cutting height gives users the flexibility to choose their preferred grass length, accommodating different lawn care preferences.

In terms of convenience, the Craftsman 917.273392 does not disappoint. The mower includes a hydrostatic transmission, which provides seamless shifting without the need for a clutch. This feature ensures a smooth operation, allowing the user to focus on mowing rather than managing gears. The ergonomic design of the control panel enhances user comfort, with easy-to-reach levers for controlling speed and cutting height.

Safety is also a priority in the Craftsman 917.273392 design. The mower is equipped with a safety switch that automatically shuts off the engine when the operator leaves the seat, preventing accidents and enhancing peace of mind during operation.

Another valuable characteristic of this mower is its mulching capability. The optional mulching kit enables users to finely chop grass clippings, returning nutrients back to the soil, which can improve lawn health over time. The rear bagger option adds further versatility, allowing for efficient collection and disposal of grass clippings.

Maintenance has been made simpler with the inclusion of easy-access features. The mower deck can be easily cleaned without having to reach underneath, and regular maintenance tasks such as oil changes are straightforward.

Overall, the Craftsman 917.273392 combines power, versatility, and user-centric design elements, making it a reliable choice for homeowners looking to maintain a well-manicured lawn with ease.
Top Page Image Contents