Craftsman 917.27206 Tractor, To Remove Mower, To Install Mower, To Level Mower Housing

Page 23

_CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

1.Depress clutch/brake pedal fully and set parking brake.

2.Place motion control lever in neutral (N) position.

3.Place attachment clutch in "DISENGAGED" position.

4.Turn ignition key "OFF" and remove key.

5.Make sure the blades and all moving parts have completely stopped.

6.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER

Mower will be easier to remove from the right side of tractor.

1.Place attachment clutch in "DISEN-

GAGED" position.

2.Move attachment lift lever forward to lower mower to its lowest position.

3.Roll belt off engine pulley.

4.Remove small retainer spring, and lift clutch spring off pulley bolt.

5.Remove large retainer spring, slide collar off and push housing guide out of bracket.

6.Disconnect anti-swaybar from chassis bracket by removing retainer spring.

7.Disconnect suspension arms from rear deck brackets by removing retainer springs.

8.Disconnect front links from deck by removing retainer springs.

9.Raise lift lever to raise suspension arms. Slide mower out from under tractor.

Small RetainerSpring

Clutch

AnU-Swa

IMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front links and hook

the clutch spring Into square hole in frame.

TO INSTALL MOWER

1.Raise attachment lift lever to its highest position.

2.Slide mower under tractor with discharge guard to right side of tractor.

3.Lower lift lever to its lowest position.

4.Install mower in reverse order of removal instructions.

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure

tires areproperly inflated (See "PROD-

UCT SPECIFICATIONS" section of this manual). If tires are over or underinflated, you will not properly adjust your mower.

Link

3pdngs

(Both Sides)

Housing Guide

Larg

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Jcraftsmanj Limited 90 DAY Warranty on Battery II. Slope Operation Do notGeneral Operation III. Children IV. ServiceCancer and birth defects or other repro- ductive harm Customer Responsibilities Product SpecificationsRepair Agreement Steedng To Removetractor from Carton Unpack Carton Tools Required for AssemblyAssemble Extension Shaft and Boot Install Steering WheelInstall Seat Checkbrakesystem To Convertto Bagging or DischargingChecktire Pressure Check for Proper Position of ALL Belts@ ixl Engine off Howto Useyourtractor To Transport To Adjust Gauge WheelsTo Operate Mower To Operate on HillsTo Start Engine Towing Carts and Other ATTACH- MentsBefore Startingthe Engine Check Engine OIL Level ADD GasolineAutomatictransmission Warm UP Mulching Mowingtips Before Each USE Lubrication ChartMaintenance Schedule General RecommendationsOperator Presence System TractorBrake Operation TiresEngine Lubrication To Clean Battery and TerminalsProduct Specifications Transaxle Pump FluidClean AIR INTAKE,/COOUNG Areas To Service PRE-CLEANERTo Service Cartridge Clean AIR ScreenIN-LINE Fuel Rlter CleaningTo Remove Mower To Install MowerTo Level Mower Housing TractorBelt Removal To Replace Mower Blade Drive BeltTransaxle Motion Control Lever Neutral Adjustment Belt InstallationTo Adjust Brake To REMOVECABLES,REVERSEORDER To AttachjumpercablesInterlocks and Relays Replacing Battery To Remove Hood and Grill AS SemblyTo Adjust Throttle Control Cable To Replace Headlight BulbAccelerationtest To Adjust CarburetorCylinders To Clean Battery and TermiEngine Fuel System Engine OILCause Correction ProblemCorrection Roubleshooting ChartProblem OFF Troubleshooting Chart ProblemcauseFUESH-OF Tractor - Model Number SchematicTractor - Model Number Electrical KEY Part NO. no Description Tractor --MODEL Number ElectricalTractor -- Model Number 917.272060 Chassis and Enclosures KEY Part Description Tractor - Model Number 917.272060 Chassis and EnclosuresTractor -- Model Number Ground Drive TRACTOR-- MODELNUMBER917.272060 Tractor -- Model Number 917.272060 Steering Assembly KEY Part No NO.DESCRIPTION TRACTOR-- MODELNUMBER917.272060 SteeringassemblyOptional Equipment KEY Part NO. NO.DESCRIPTION Tractor -- Model Number Seat Assembly Wheels &TIRES KEY Part Description NO. no TRACTOR- -MODELNUMBER DecalsTractor -- Model Number Lift Assembly KEY Part NO. NO,DESCRIPTION TRACTOR- Model Number Lift AssemblyTractor -- Model Number Mower Deck TRACTOR-- MODELNUMBER917.272060 Mowerdeck 48107 75xl,750x.625 Cylinder HEAD, Valve and Breather Crankcase KEY Part Descripon Cylinder HEADNALVE/BREATHER KEY Part DescrtionIgnitionielectrical AIR INTAKE/RLTRATION KEY Part Description Blower Housing & Baffles KEY Part NO. NO,DESCRIPTIONIGNITION/ELECTRICAL KEY Part NO. NO,DESCRIPTION Not Illustrated1C2 Engine Controls KEY Part Description Starting System KEY Part DescriptionOIL PAN/LUBRICATION KEY Part NO. NO,DESCRIPTION Fuelsystem CrankshaftExhaustj Exhaust KEY Part Description Fuel System KEY Part DescriptionCrankshaft KEY Part Description Page Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationPage Page Get it fixed, at your home or ours

917.27206 specifications

The Craftsman 917.27206 is a highly regarded riding lawn mower that has been designed for homeowners seeking an efficient and user-friendly solution for maintaining their lawns. This machine merges power with precision, offering a variety of features that cater to different mowing needs.

One of the standout characteristics of the Craftsman 917.27206 is its robust engine. Equipped with a powerful 19 horsepower Briggs & Stratton engine, this mower ensures reliable performance on a range of terrains. The engine is designed for easy starting and delivers consistent power, making lawn maintenance a breeze even in challenging conditions.

The mower features a 42-inch cutting deck, allowing for an efficient mowing experience. This wide cutting path reduces the time spent mowing, while the deck’s design ensures a clean and even cut. The adjustable cutting height provides versatility, allowing users to select from various settings based on grass height and personal preference. The craftsmanship evident in the deck design also facilitates superior grass dispersal, reducing clumping and enhancing lawn health.

Durability is another defining feature of the Craftsman 917.27206. The heavy-duty steel frame is built to withstand the rigors of regular use, ensuring longevity. The reinforced components alike the front axle and the deck contribute to a sturdy build that is equipped to handle bumps and rough patches throughout your yard.

Designed with user comfort in mind, the mower boasts an ergonomic seat that ensures a comfortable riding experience. The controls are intuitively placed, allowing for easy operation while navigating your lawn. The tight turning radius enhances maneuverability, making it easier to navigate around flower beds and landscaping features.

Another notable technology integrated into the Craftsman 917.27206 is the automatic transmission, which provides seamless speed control. This feature simplifies operation, allowing users to focus on achieving a consistent cut rather than managing gears. The mower also offers rear bagging capabilities, making it easy to collect clippings for disposal or composting.

In summary, the Craftsman 917.27206 is an impressive riding mower characterized by its powerful engine, durable construction, and user-friendly features. Whether you are a seasoned homeowner or new to lawn care, this mower is designed to make maintaining your yard a simpler, more enjoyable task.
Top Page Image Contents