Craftsman 917.27206 owner manual Howto Useyourtractor

Page 13

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repaim. We recommend a wide vision safety mask over spectacles or standard safety glasses.

HOWTO USEYOURTRACTOR

TO SET PARKING BRAKE

Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

1.Depress clutch/brake pedal into full

"BRAKE" position and hold.

2.Place parking brake lever in "EN- GAGED" position and release pressure from clutch/brake pedal. Pedal should remain in "BRAKE"

position. Make sure parking brake will hold tractor secure.

Throttte/

AttachmentClutch Lever

 

 

"Engaged"

 

_j

Position

 

IgnitionKey

 

P""

"Disengaged"

 

Posi_on

/_addng Brake

=Engaged"

aClr_

___

, -. •

_,_

=Disengaged" Position Lever

Position

STOPPING

MOWER BLADES -

•To stop mower blades,move attach- ment clutch lever to =DISENGAGED"

position.

GROUND DRIVE -

•To stop ground drive, depress clutch/ brake pedal into full =BRAKE" position.

•Move motion control lever to neutral (N)

position.

IMPORTANT: The motion control lever does not return to neutral (N) position when the clutcWbrake pedal is de- pressed.

ENGINE -

•Move throttle control to slow position. NOTE: Failure to move throttle control to slow position and allowing engine to idle before stopping may cause engine to =backfire".

•Turn ignition key to =OFF" position and remove key. Always remove key when leaving tractor to prevent unauthorized use.

•Never use choke to stop engine.

IMPORTANT: Leaving the ignition switch in any position other than "OFF" will cause the battery to be discharged, (dead).

NOTE: Under certain conditions when

tractor is standing idle with the engine running, hot engine exhaust gases may cause =browning" of grass. To eliminate this possibility, always stop engine when stopping tractor on grass areas.

p_eCt,UTIOI_: Al_ay.s s.top tr_ctgr com- ely, as oescnoeo above, oerore

leaving the operator'sposition; to empty grass catcher, etc.

TO USE THROTTLE CONTROL

Always operate engine at full throttle.

•Operating engine at less than full

throttle reduces the battery charging rate.

•Full throttle offers the best bagging and mower performance.

TO MOVE FORWARD AND

BACKWARD

The direction and speed of movement is controlled by the motion control lever.

1.Start tractor with motion control lever in neutral (N) position.

2.Release parking brake and clutch/ brake pedal.

3.Slowly move motion control lever to desired position.

TO ADJUST MOWER CUTTING HEIGHT

The position of the attachment lift lever determines the cutting height.

•Grasp lift lever.

•Press plunger with thumb and move lever to desired position.

The cutting height range is approxi- mately 1-1/2 to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to

approximately 2-1/2inches dudng the cool season and to over 3 inches

dudng hot months. For healthier and better looking lawns, mow often and after moderate growth.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Jcraftsmanj Limited 90 DAY Warranty on Battery General Operation Do notII. Slope Operation III. Children IV. ServiceCancer and birth defects or other repro- ductive harm Repair Agreement Product SpecificationsCustomer Responsibilities Steedng Assemble Extension Shaft and Boot Tools Required for AssemblyInstall Steering Wheel To Removetractor from Carton Unpack CartonInstall Seat Checktire Pressure To Convertto Bagging or DischargingCheck for Proper Position of ALL Belts Checkbrakesystem@ ixl Engine off Howto Useyourtractor To Operate Mower To Adjust Gauge WheelsTo Operate on Hills To TransportBefore Startingthe Engine Check Engine OIL Level Towing Carts and Other ATTACH- MentsADD Gasoline To Start EngineAutomatictransmission Warm UP Mulching Mowingtips Maintenance Schedule Lubrication ChartGeneral Recommendations Before Each USEBrake Operation TractorTires Operator Presence SystemProduct Specifications To Clean Battery and TerminalsTransaxle Pump Fluid Engine LubricationTo Service Cartridge To Service PRE-CLEANERClean AIR Screen Clean AIR INTAKE,/COOUNG AreasIN-LINE Fuel Rlter CleaningTo Level Mower Housing To Install MowerTractor To Remove MowerBelt Removal To Replace Mower Blade Drive BeltTo Adjust Brake Belt InstallationTransaxle Motion Control Lever Neutral Adjustment To REMOVECABLES,REVERSEORDER To AttachjumpercablesTo Adjust Throttle Control Cable Replacing Battery To Remove Hood and Grill AS SemblyTo Replace Headlight Bulb Interlocks and RelaysAccelerationtest To Adjust CarburetorEngine Fuel System To Clean Battery and TermiEngine OIL CylindersCause Correction ProblemProblem Roubleshooting ChartCorrection OFF Troubleshooting Chart ProblemcauseFUESH-OF Tractor - Model Number SchematicTractor - Model Number Electrical KEY Part NO. no Description Tractor --MODEL Number ElectricalTractor -- Model Number 917.272060 Chassis and Enclosures KEY Part Description Tractor - Model Number 917.272060 Chassis and EnclosuresTractor -- Model Number Ground Drive TRACTOR-- MODELNUMBER917.272060 Tractor -- Model Number 917.272060 Steering Assembly KEY Part No NO.DESCRIPTION TRACTOR-- MODELNUMBER917.272060 SteeringassemblyOptional Equipment KEY Part NO. NO.DESCRIPTION Tractor -- Model Number Seat Assembly Wheels &TIRES KEY Part Description NO. no TRACTOR- -MODELNUMBER DecalsTractor -- Model Number Lift Assembly KEY Part NO. NO,DESCRIPTION TRACTOR- Model Number Lift AssemblyTractor -- Model Number Mower Deck TRACTOR-- MODELNUMBER917.272060 Mowerdeck 48107 75xl,750x.625 Cylinder HEAD, Valve and Breather Crankcase KEY Part Descripon Cylinder HEADNALVE/BREATHER KEY Part DescrtionIgnitionielectrical IGNITION/ELECTRICAL KEY Part NO. NO,DESCRIPTION Blower Housing & Baffles KEY Part NO. NO,DESCRIPTIONNot Illustrated AIR INTAKE/RLTRATION KEY Part Description1C2 OIL PAN/LUBRICATION KEY Part NO. NO,DESCRIPTION Starting System KEY Part DescriptionEngine Controls KEY Part Description Exhaustj CrankshaftFuelsystem Crankshaft KEY Part Description Fuel System KEY Part DescriptionExhaust KEY Part Description Page Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationPage Page Get it fixed, at your home or ours

917.27206 specifications

The Craftsman 917.27206 is a highly regarded riding lawn mower that has been designed for homeowners seeking an efficient and user-friendly solution for maintaining their lawns. This machine merges power with precision, offering a variety of features that cater to different mowing needs.

One of the standout characteristics of the Craftsman 917.27206 is its robust engine. Equipped with a powerful 19 horsepower Briggs & Stratton engine, this mower ensures reliable performance on a range of terrains. The engine is designed for easy starting and delivers consistent power, making lawn maintenance a breeze even in challenging conditions.

The mower features a 42-inch cutting deck, allowing for an efficient mowing experience. This wide cutting path reduces the time spent mowing, while the deck’s design ensures a clean and even cut. The adjustable cutting height provides versatility, allowing users to select from various settings based on grass height and personal preference. The craftsmanship evident in the deck design also facilitates superior grass dispersal, reducing clumping and enhancing lawn health.

Durability is another defining feature of the Craftsman 917.27206. The heavy-duty steel frame is built to withstand the rigors of regular use, ensuring longevity. The reinforced components alike the front axle and the deck contribute to a sturdy build that is equipped to handle bumps and rough patches throughout your yard.

Designed with user comfort in mind, the mower boasts an ergonomic seat that ensures a comfortable riding experience. The controls are intuitively placed, allowing for easy operation while navigating your lawn. The tight turning radius enhances maneuverability, making it easier to navigate around flower beds and landscaping features.

Another notable technology integrated into the Craftsman 917.27206 is the automatic transmission, which provides seamless speed control. This feature simplifies operation, allowing users to focus on achieving a consistent cut rather than managing gears. The mower also offers rear bagging capabilities, making it easy to collect clippings for disposal or composting.

In summary, the Craftsman 917.27206 is an impressive riding mower characterized by its powerful engine, durable construction, and user-friendly features. Whether you are a seasoned homeowner or new to lawn care, this mower is designed to make maintaining your yard a simpler, more enjoyable task.
Top Page Image Contents