Craftsman 917.27206 To Adjust Gauge Wheels, To Operate Mower, To Operate on Hills, To Transport

Page 14

Forbestcuttingperformance,grass over6 inchesinheightshouldbe mowedtwice.Makethefirst cut

relativelyhigh;the secondto desired height.

TO ADJUST GAUGE WHEELS

Gauge wheels are propedyadjusted when they are slightlyoffthe ground when moweris at the desired cutting height in operatingposition.Gauge wheels then keep the deck in prober positionto help preventscalpingin most terrain conditions.

NOTE: Adjustgaugewheels with tractor on a flat level surface.

1.Adjust mowerto desiredcuttingheight (See TO ADJUST MOWER CUTTING

HEIGHT" in the Operationsectionof this manual).

2.With mower in desiredheight of cut position,gauge wheels shouldbe assembledso they are slightlyoff the ground.Installgauge wheel in appropdatehole with shoulderbolt, 3/8 washer, and 3/8-16Iocknutand tighten securely.

3.Repeat for oppositeside installing

gauge wheel in same adjustment hole.

3/8-16 Locknut ._

Wheel

Shoulder

3/8

Gaug,

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

1.Select desired height of cut.

2.Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

_, CAUTION: Do not operate the

mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

AttachmentClutch Lover

Attachemnt

"Engaged"

 

LiftLever High

Position_

 

Position

 

 

 

 

n

"Dise_

 

 

Position

_ _'_

 

Deflector

Shield

TO OPERATE ON HILLS

_CAUTION: Do not ddve up or down hills with slopes greater than 15 ° and do not ddve across any slope.

Choose the slowest speed before starting up or down hills.

Avoid stopping or changing speed on hills.

If slowing is necessary, move throttle control lever to slower position.

If stopping is absolutely necessary, push clutch/breke pedal quickly to brake position and engage parking brake.

Move motion control lever to neutral (N) position.

IMPORTANT: The motion control lever does not return to neutral (N) position when the clutch/brake pedal is de- pressed.

To restart movement, slowly release parking brake and clutch/brake pedal.

Slowly move motion control lever to slowest setting.

Make all turns slowly.

TO TRANSPORT

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

1.Raise attachment lift to highest position with attachment lift control.

2.Pull freewheel control out and down into the slot and release so it is held in

the disengaged position.

Do not push or tow tractor at more than two (2) MPH.

To reengaga transmission, reverse above procedure.

14

Image 14
Contents Jcraftsmanj Limited 90 DAY Warranty on Battery II. Slope Operation Do notGeneral Operation IV. Service III. ChildrenCancer and birth defects or other repro- ductive harm Customer Responsibilities Product SpecificationsRepair Agreement Steedng Install Steering Wheel Tools Required for AssemblyAssemble Extension Shaft and Boot To Removetractor from Carton Unpack CartonInstall Seat Check for Proper Position of ALL Belts To Convertto Bagging or DischargingChecktire Pressure Checkbrakesystem@ ixl Engine off Howto Useyourtractor To Operate on Hills To Adjust Gauge WheelsTo Operate Mower To TransportADD Gasoline Towing Carts and Other ATTACH- MentsBefore Startingthe Engine Check Engine OIL Level To Start EngineAutomatictransmission Warm UP Mulching Mowingtips General Recommendations Lubrication ChartMaintenance Schedule Before Each USETires TractorBrake Operation Operator Presence SystemTransaxle Pump Fluid To Clean Battery and TerminalsProduct Specifications Engine LubricationClean AIR Screen To Service PRE-CLEANERTo Service Cartridge Clean AIR INTAKE,/COOUNG AreasCleaning IN-LINE Fuel RlterTractor To Install MowerTo Level Mower Housing To Remove MowerTo Replace Mower Blade Drive Belt Belt RemovalTransaxle Motion Control Lever Neutral Adjustment Belt InstallationTo Adjust Brake To Attachjumpercables To REMOVECABLES,REVERSEORDERTo Replace Headlight Bulb Replacing Battery To Remove Hood and Grill AS SemblyTo Adjust Throttle Control Cable Interlocks and RelaysTo Adjust Carburetor AccelerationtestEngine OIL To Clean Battery and TermiEngine Fuel System CylindersProblem Cause CorrectionCorrection Roubleshooting ChartProblem Troubleshooting Chart Problemcause OFFTractor - Model Number Schematic FUESH-OFTractor - Model Number Electrical Tractor --MODEL Number Electrical KEY Part NO. no DescriptionTractor -- Model Number 917.272060 Chassis and Enclosures Tractor - Model Number 917.272060 Chassis and Enclosures KEY Part DescriptionTractor -- Model Number Ground Drive TRACTOR-- MODELNUMBER917.272060 Tractor -- Model Number 917.272060 Steering Assembly TRACTOR-- MODELNUMBER917.272060 Steeringassembly KEY Part No NO.DESCRIPTIONOptional Equipment KEY Part NO. NO.DESCRIPTION Tractor -- Model Number Seat Assembly TRACTOR- -MODELNUMBER Decals Wheels &TIRES KEY Part Description NO. noTractor -- Model Number Lift Assembly TRACTOR- Model Number Lift Assembly KEY Part NO. NO,DESCRIPTIONTractor -- Model Number Mower Deck TRACTOR-- MODELNUMBER917.272060 Mowerdeck 48107 75xl,750x.625 Cylinder HEAD, Valve and Breather Cylinder HEADNALVE/BREATHER KEY Part Descrtion Crankcase KEY Part DescriponIgnitionielectrical Not Illustrated Blower Housing & Baffles KEY Part NO. NO,DESCRIPTIONIGNITION/ELECTRICAL KEY Part NO. NO,DESCRIPTION AIR INTAKE/RLTRATION KEY Part Description1C2 Engine Controls KEY Part Description Starting System KEY Part DescriptionOIL PAN/LUBRICATION KEY Part NO. NO,DESCRIPTION Fuelsystem CrankshaftExhaustj Exhaust KEY Part Description Fuel System KEY Part DescriptionCrankshaft KEY Part Description Page Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across HillPage Page Get it fixed, at your home or ours

917.27206 specifications

The Craftsman 917.27206 is a highly regarded riding lawn mower that has been designed for homeowners seeking an efficient and user-friendly solution for maintaining their lawns. This machine merges power with precision, offering a variety of features that cater to different mowing needs.

One of the standout characteristics of the Craftsman 917.27206 is its robust engine. Equipped with a powerful 19 horsepower Briggs & Stratton engine, this mower ensures reliable performance on a range of terrains. The engine is designed for easy starting and delivers consistent power, making lawn maintenance a breeze even in challenging conditions.

The mower features a 42-inch cutting deck, allowing for an efficient mowing experience. This wide cutting path reduces the time spent mowing, while the deck’s design ensures a clean and even cut. The adjustable cutting height provides versatility, allowing users to select from various settings based on grass height and personal preference. The craftsmanship evident in the deck design also facilitates superior grass dispersal, reducing clumping and enhancing lawn health.

Durability is another defining feature of the Craftsman 917.27206. The heavy-duty steel frame is built to withstand the rigors of regular use, ensuring longevity. The reinforced components alike the front axle and the deck contribute to a sturdy build that is equipped to handle bumps and rough patches throughout your yard.

Designed with user comfort in mind, the mower boasts an ergonomic seat that ensures a comfortable riding experience. The controls are intuitively placed, allowing for easy operation while navigating your lawn. The tight turning radius enhances maneuverability, making it easier to navigate around flower beds and landscaping features.

Another notable technology integrated into the Craftsman 917.27206 is the automatic transmission, which provides seamless speed control. This feature simplifies operation, allowing users to focus on achieving a consistent cut rather than managing gears. The mower also offers rear bagging capabilities, making it easy to collect clippings for disposal or composting.

In summary, the Craftsman 917.27206 is an impressive riding mower characterized by its powerful engine, durable construction, and user-friendly features. Whether you are a seasoned homeowner or new to lawn care, this mower is designed to make maintaining your yard a simpler, more enjoyable task.