Craftsman 917.27339 Install Mulcher Plate, Check Brake System, Discharging, Check Tire Pressure

Page 10

INSTALL MULCHER PLATE

(If previously removed)

1.Raise and hold deflector shield in upright position.

2.Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

3.Hook front latch into hole on front of mower deck.

4.Hook rear latch into hole on back of mower deck.

Deflector

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replac- ing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your trac- tor, check to see that the brake is properly adjusted. See "TO ADJUST BRAKE" in the Service and Adjustments section of

Shield

Mulcher Plate

Latch

Hooks

this manual.

,/CHECKLIST

Before you operate and enjoy your new tractor, we wish to assure that you receive the best performance and satisfaction from this Quality Product.

Please review the following checklist: ,/All assembly instructions have been

completed.

AHi,CAUTION: Do not remove deflector shield from mower.

TO CONVERTTO BAGGING OR

DISCHARGING

Simply remove mulcher plate and store in a safe place.Your mower is now ready for discharging or installation of optional grass catcher accessory.

NOTE: It is not necessary to change blades. The mutcher blades are designed for discharging and bagging also.

CHECK TIRE PRESSURE

The tires on your tractor were overin- flated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" section

of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower hous-

ing should be properly leveled. See "TO LEVEL MOWER HOUSING" in the Service

and Adjustments section of this manual.

•/ No remaining loose parts in carton. ,/Battery is properly prepared and

charged. (Minimum 1 hour at 6 amps). ,/Seat is adjusted comfortably and tight-

ened securely.

,/All tires are properly inflated. (For ship- ping purposes, the tires were overin-

flated at the factory).

,/Be sure mower deck is properly leveled side-to-side/front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

,/Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

,/Check wiring. See that all connections are still secure and wires are properly clamped.

While learning how to use your tractor, pay

extra attention to the following important items:

•/ Engine oil is at proper level.

,/Fuel tank is filled with fresh, clean, regu- lar unleaded gasoline.

,/Become familiar with all controls - their

location and function. Operate them before you start the engine.

,/Be sure brake system is in safe oper- ating condition.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Jcriiftsmiinj Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryII. Slope Operation General OperationIII. Children IV. ServiceDo not Page Product Specifications Repair Protection AgreementsSeat Steering WheelKeys Slope Sheet Video Cassette To Remove Tractor from Tools Required for AssemblyAssemble Extension Shaft and Boot Unpack CartonCheck Battery Discharging Install Mulcher PlateCheck Brake System Check Tire Pressure@@@@@ Ammeter Know Your TractorLift Lever To USE Throttle Control HOW to USE Your Tractor To SET Parking BrakeThrottle reduces the battery charging rate Always operate engine at full throttleTo Transport To Operate On HillsDo not drive up or down Towing Carts and Other Attach MentsTo Start Engine ADD GasolineMowing Tips Mulching Mowing TipsGeneral Recommendations Lubrication ChartBefore Each USE Operator Presence System TractorBlade Removal Transaxle Cooling BatteryEngine BeltsEngine Cooling System Clean AIR ScreenAIR Filter Spark PlugsTo Install Mower CleaningTractor To Remove Mower To Level Mower Housing SIDE-TO-SIDE AdjustmentTo Check Brake Belt InstallationTo Check and Adjust Brake Belt RemovalFront Wheel TOE-IN/CAMBER To Adjust Steering Wheel Align MentTransaxle Gear Shift Lever NEU Tral Adjustment To Start Engine with a Weak BAT TeryTo Replace Fuse Replacing BatteryInterlocks and Relays To Remove Hood and Grill AS- SemblyFinal Setting To Adjust Throttle Control CablePreliminary Setting To Adjust CarburetorCylinders BatteryEngine OIL OtherProblem Troubleshooting ChartEngine will not turn over Engine clicks but will not start Excessive ProblemLoss of power VibrationNot rotate Battery will NotMower blades will Poor grassTractor - Model Number Schematic BlackTractor - Model Number Electrical KEY Part NO. NO. Description 20f Tractor - Model Number 917.273390 Chassis and EnclosuresKEY Part Description 7oo Tractor - Model Number Ground DriveKEY Part Tractor - Model Number 917.273390 Steering Assembly KEY Part Description Engine Tractor - Model NumberOptional Equipment Tractor - Model Number Seat Assembly KEY Part Tractor - Model Number DecalsWheels &TIRES KEY Part Description Tractor - Model Number Lift Assembly Tractor - Model Number Mower Deck KEY Part NO. NO.DESCRIPTION 15729B Part Description 20@ 7Sv5 108A 917.273390 Tractor Model NumberBriggs ENGINE-MODEL Number KEY Part NO. NO.DESCRIPTION Description Page Page Suggested Guide for Sighting Slopes for Safe Operation AR 0 4,0

917.27339 specifications

The Craftsman 917.27339 is a versatile riding lawn mower designed for homeowners seeking efficiency and performance in lawn maintenance. This model boasts a robust build quality, making it a popular choice among gardening enthusiasts and professional landscapers alike.

One of the standout features of the Craftsman 917.27339 is its powerful 26-horsepower Kohler engine, providing ample power for tackling a variety of lawn sizes and terrains. The engine ensures reliable performance and longevity, making it suitable for both residential use and larger landscapes. The mower is equipped with a hydrostatic transmission, which allows for smooth speed transitions without the need for shifting gears, making it easy to maneuver around obstacles and varying terrains.

The cutting deck is another highlight of the Craftsman 917.27339. With a 54-inch cutting width, it is designed to efficiently handle large mowing areas, reducing the time required to complete lawn care tasks. The deck features a 12-gauge steel construction, which increases durability and allows for effective grass cutting and collection. The adjustable cutting height, ranging from 1.5 to 4 inches, provides users with flexibility, enabling them to achieve the desired lawn finish.

In terms of technology and user convenience, the Craftsman 917.27339 is equipped with an ergonomic seat and steering wheel, promoting comfort during extended use. The mower also features an easy-to-access control panel that provides essential information at a glance, including speed and fuel levels.

For those concerned about grass clippings, this model includes a rear discharge option, which helps to distribute clippings evenly across the lawn, promoting healthier grass growth. Additionally, the optional bag attachment allows for easy collection of clippings, keeping your yard neat and tidy.

The Craftsman 917.27339 stands out not only for its performance but also for its ease of maintenance. It features quick-change oil and air filters, allowing users to perform routine upkeep without hassle. With its combination of power, comfort, and cutting-edge features, the Craftsman 917.27339 is an ideal choice for anyone looking to maintain a beautiful, well-manicured lawn with minimal effort.
Top Page Image Contents