Craftsman 917.27339 owner manual AIR Filter, Clean AIR Screen, Engine Cooling System, Spark Plugs

Page 20

ENGINEOIL FILTER

Replacethe engineoil filter every season

or every other oil change if the tractoris used morethan 100 hoursin one year.

AIR FILTER

Your engine will not run properly using a dirty air filter. Replace pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every 100 hours of operation or every season, whichever occurs first.

CLEAN AIR SCREEN

Air screen must be kept free of dirt and

chaff to prevent engine damage from overheating. Clean with a wire brush or

compressed air to remove dirt and stub- born dried gum fibers.

ENGINE COOLING SYSTEM

Debris may clog the engine's air cool- ing system. Remove blower housing and clean area shown to prevent overheating and engine damage.

Service air cleaner more often under dusty conditions.

1.Pull up on air filter cover handle and rotate towards engine.

2.Remove cover.

3.Carefully remove air filter cartridge and pre-cleaner from base.

4.Clean base carefully to prevent debris from falling into carburetor.

NOTE: If very dirty or damaged, replace cartridge.

5.Place new pre-cleaner and cartridge firmly in base.

6.Align tabs on cover with slots in blower housing and replace cover.

7.Hook handle on cover and push down on handle to close.

Air Screen

MUFFLER

Clean out chaff and debris

IMPORTANT: Petroleum solvents, such as kerosene, are not to be used to clean the cartridge. They may cause deterio- ration of the cartridge. Do not oil car- tridge. Do not use pressurized air to clean cartridge.

jCover

Cartridge

Inspect and replace corroded muffler and spark arrester (if equipped) as it could cre- ate a fire hazard and/or damage.

SPARK PLUG(S)

Replace spark plug(s) at the beginning of each mowing season or after every 100 hours of operation, whichever occurs

first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS"

section of this manual.

IN-LINE FUEL FILTER

The fuel filter should be replaced once each season. If fuel filter becomes

clogged, obstructing fuel flow to carbu- retor, replacement is required.

1.With engine cool, remove filter and plug fuel line sections.

2.Place new fuel filter in position in fuel line with arrow pointing towards carbu- retor.

3.Be sure there are no fuel line leaks and clamps are properly positioned.

4.Immediately wipe up any spilled gaso- line.

_

 

Clamp

Slots

 

 

Clamp f

_

_..__

 

 

_- Fuel Filter

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Jcriiftsmiinj Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryII. Slope Operation General OperationDo not IV. ServiceIII. Children Page Product Specifications Repair Protection AgreementsKeys Slope Sheet Video Cassette Steering WheelSeat Tools Required for Assembly Assemble Extension Shaft and BootTo Remove Tractor from Unpack CartonCheck Battery Install Mulcher Plate Check Brake SystemDischarging Check Tire Pressure@@@@@ Lift Lever Know Your TractorAmmeter HOW to USE Your Tractor To SET Parking Brake Throttle reduces the battery charging rateTo USE Throttle Control Always operate engine at full throttleTo Operate On Hills Do not drive up or downTo Transport Towing Carts and Other Attach MentsTo Start Engine ADD GasolineMowing Tips Mulching Mowing TipsBefore Each USE Lubrication ChartGeneral Recommendations Blade Removal TractorOperator Presence System Battery EngineTransaxle Cooling BeltsClean AIR Screen AIR FilterEngine Cooling System Spark PlugsTractor To Remove Mower CleaningTo Install Mower To Level Mower Housing SIDE-TO-SIDE AdjustmentBelt Installation To Check and Adjust BrakeTo Check Brake Belt RemovalTo Adjust Steering Wheel Align Ment Transaxle Gear Shift Lever NEU Tral AdjustmentFront Wheel TOE-IN/CAMBER To Start Engine with a Weak BAT TeryReplacing Battery Interlocks and RelaysTo Replace Fuse To Remove Hood and Grill AS- SemblyTo Adjust Throttle Control Cable Preliminary SettingFinal Setting To Adjust CarburetorBattery Engine OILCylinders OtherEngine will not turn over Engine clicks but will not start Troubleshooting ChartProblem Problem Loss of powerExcessive VibrationBattery will Not Mower blades willNot rotate Poor grassTractor - Model Number Schematic BlackTractor - Model Number Electrical KEY Part NO. NO. Description 20f Tractor - Model Number 917.273390 Chassis and EnclosuresKEY Part Description 7oo Tractor - Model Number Ground DriveKEY Part Tractor - Model Number 917.273390 Steering Assembly KEY Part Description Optional Equipment Tractor - Model NumberEngine Tractor - Model Number Seat Assembly Wheels &TIRES KEY Part Description Tractor - Model Number DecalsKEY Part Tractor - Model Number Lift Assembly Tractor - Model Number Mower Deck KEY Part NO. NO.DESCRIPTION 15729B Part Description 20@ 7Sv5 108A Briggs ENGINE-MODEL Number Tractor Model Number917.273390 KEY Part NO. NO.DESCRIPTION Description Page Page Suggested Guide for Sighting Slopes for Safe Operation AR 0 4,0

917.27339 specifications

The Craftsman 917.27339 is a versatile riding lawn mower designed for homeowners seeking efficiency and performance in lawn maintenance. This model boasts a robust build quality, making it a popular choice among gardening enthusiasts and professional landscapers alike.

One of the standout features of the Craftsman 917.27339 is its powerful 26-horsepower Kohler engine, providing ample power for tackling a variety of lawn sizes and terrains. The engine ensures reliable performance and longevity, making it suitable for both residential use and larger landscapes. The mower is equipped with a hydrostatic transmission, which allows for smooth speed transitions without the need for shifting gears, making it easy to maneuver around obstacles and varying terrains.

The cutting deck is another highlight of the Craftsman 917.27339. With a 54-inch cutting width, it is designed to efficiently handle large mowing areas, reducing the time required to complete lawn care tasks. The deck features a 12-gauge steel construction, which increases durability and allows for effective grass cutting and collection. The adjustable cutting height, ranging from 1.5 to 4 inches, provides users with flexibility, enabling them to achieve the desired lawn finish.

In terms of technology and user convenience, the Craftsman 917.27339 is equipped with an ergonomic seat and steering wheel, promoting comfort during extended use. The mower also features an easy-to-access control panel that provides essential information at a glance, including speed and fuel levels.

For those concerned about grass clippings, this model includes a rear discharge option, which helps to distribute clippings evenly across the lawn, promoting healthier grass growth. Additionally, the optional bag attachment allows for easy collection of clippings, keeping your yard neat and tidy.

The Craftsman 917.27339 stands out not only for its performance but also for its ease of maintenance. It features quick-change oil and air filters, allowing users to perform routine upkeep without hassle. With its combination of power, comfort, and cutting-edge features, the Craftsman 917.27339 is an ideal choice for anyone looking to maintain a beautiful, well-manicured lawn with minimal effort.
Top Page Image Contents