Attaching The Debris Collection Bag
•To attach the bag, place the opening of the bag completely over the discharge chute.
•Position the bag so that the wing knobs which secure the discharge chute to the housing are completely covered.
•Pull on the drawstrap until the bag is tight around discharge chute. See Figure 4.
Housing |
Debris Collection Bag |
Figure 4
Emptying the Debris Collection Bag
•Squeeze the locking buckle to release the bag’s drawstrap before loosening it from the discharge chute. See Figure 5
•Empty the bag and reattach to the discharge chute opening. Refer to Figure 4.
Locking Buckle |
Figure 5
7