Sears 358.79828 manual Maintenance Agreement, Product Specifications, Air gap.010-.014

:CONGRATULATIONS on your purchase of a Sears Craftsmen Brushwacker. It has been designed,

engineered and manufactured to give you the best possible dependability and performance.

Should you experience any problems you cannot easily remedy, please contact your nearest Sears Service CenterlDepartment. Sears has.competent, well trained

technicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructionswill

--enable you to assemble and maintain your unit properly. Always observe the "SAFETY RULES."

MODEL NUMBER: 358.798280

SERIAL NUMBER:

DATE OF PURCHASE:

THE MODEL AND SERIAL NUMBER WILL BE FOUND ON A DECAL ATTACHED TO THE PRODUCT.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE

PLACE FOR FUTURE REFERENCE.

MAINTENANCE AGREEMENT

A Sears Maintenance Agreement is available on this product. Contact your nearast Sears Storafor details

CUSTOMER =RESPONSIBILITIES

._ :.Read and observethe safety rules..

•Follow a regular schedule in maintaining, caring for, and using your unit:

•Follow the instructions under =Customer Responsibilities" and =Storage" sections of this

Operator'sManual.

r , rr

PRODUCT SPECIFICATIONS

cUTrlNG	PATH:	16.5" (Dual Line Head,
		ManualAdvance)
TRIMMER	LINE	095" Diameter Monofilament
SAPUNG	BLADE	8 3/4"(225mm), 20 tooth
		.78"T'(20mm)Arbor diameter
BRUSH BLADE		10"(255mm), 3 tooth
		.787"(20mm)Arbor diameter
ENGINE:	.................	36cc, 2-cycle Air Cooled
FUEUOIL MIX RATIO:		40:! (3.2oz_oilper gallon,gas)
IGNITION:		SolidState
		(Air gap.010"-.014")
IGNITIONTIMING:		Non-Adjustable, Fixed
SPARKPLUG TYPE:		ChampionCJ-TY
		Autolite853
S_P_,RKPLUG GAP:		020"
MUFFLER:		Spark ArrestingScreen
		(Requires assembly)
ENGINE RPM:		11,000 RPM Maximum
BLADENUT TORQUE: ....		20-35 lb.-ft.
SHIELD SCREWS:		70 lb.-in:Minimum

SPECIAL NOTICE

For users on U.S. Forest Land in the states of Caiif0mia, Maine Oregon, New Jersey, Idaho, Minnesota, and Washington. AI U.S. Forest Land and the states of California (Public Rseoulces

Codes 4442 and 4443), Oregon, and Washington require, by law, that certain internal combustionengines operated on for- est, brush, and/or grass-covered areas be equipped with a

sparkarrestor,maintainedin effectiveworkingorder,orthe en- ginebeconstructed"equipped,and maintainedfor:thepreven- tionoffire. Checkwithyourstate orIomdauthotitlesforreguis.- 'i

ti0ns pertaining to these requirements.. Failureto followthese

requirementsis a violationof the law. The factory provided spa_ arrest=orscreen is not asesmbledwiththisunit.

MANUFACTURED UNDER ONE OR MOR_ OF THE FOLLOWING pATENTS: 4,974,973; 5,105,'J'7_D339,591; D333,954. OTHER U.S, AND FOREIGN PATENTS PEN DING.

FULL TWO-YEAR WARRANTY ON

CRAFTSMAN GAS-POWERED BRUSHWACKER ® BLADED TRIMMER

For two(2) years from the date of purchase, when this Craftsman Gas-Powered Brushwacker is maintained, lubricated

and tuned-up according to the operating and maintenance instructionsin the owner'smanua, Sears will repair, free of charge, any defect in matedals or workmanship.

This warranty excludes blade nylon line, spark plug, and air t_lter,which are expendable parts and become worn dudng normal use.

If this Brushwacker is used for commercial purposes, this warranty applies for only 90 days from the date of purchase. If this Brushwacker is used for rental purposes, this warranty applies for only 30 days frern the date of purchase. This warranty applies only while this product is in use in the United States.

WARRANTY SERVICE IS AVAILABLE BY RETURNING THE BRUSRWACKER TOTHE NEAREST SEARS SERVCI CENTER IN THE UNITED STATES.

This warranty gives you specific legal dghts, and you may also have other rights which vary from state to state.

SEARS, ROEBUCK AND CO., D/817WA, HOFFMAN ESTATES, IL 60179

-4.