McCulloch MCT3362VA, 966992201 Safety Precautions Assembly Instructions, International Symbols

2 - SAFETY PRECAUTIONS

3 - ASSEMBLY INSTRUCTIONS

2-3. INTERNATIONAL SYMBOLS

Use of these personal safety items is highly recommended to reduce the risk of accidental injury.

Read the User Manual.

	Do not use blade on this unit.
Minimum operating distance

Pump the primer bulb 10 times.

3-1. “P” HANDLE ASSEMBLY

1.To install handle onto unit, you will need the following components from your user kit: “P” handle (A & B), screws (C) and nuts (D). (Figure 3-1).

2.Install the handle (B) on the shaft 6.0” to 7.87” (160- 200mm) from throttle and tighten the 2 screws (C) and nuts (D).

A

C

B

D

3-1A

3-2. DEBRIS SHIELD

WARNING

The debris shield must be installed (Figure 3-2A) to prop- erly dispense cutter line and protect operator.

Shield fits snug on shaft. Some force may be required.

1.Seat shield (A) onto shaft bracket (B). (Fig. 3-2A)

2.Insert bolt (C), washer (D), lock washer (E) and wing nut (F), tighten securely. (Fig. 3-2B)

B

F

E

D

C

3-2B

6

A

3-2A

7