Woods Equipment MZ2252K manual Foot Lift Pedal

Page 19

WOODS

CONTROLS

FUEL VALVES (U) - A fuel tank selector valve is
provided on oil cooler mounting bracket.The fuel tank
selector valve has three positions:
Off: The tank selector is off when the lever points to-
ward the machine. The selector should be off when-
ever the machine is transported or stands unused for
any length of time. Shutting off the fuel supply avoids
the possibility of flooding should any dirt get under
the carburetor float needle. Leaving the tank selec-
tor in either tank position can allow severe flooding,
which may ruin the engine by diluting the oil.
Right Tank: Fuel flows from the right tank when the
selector is turned 1/4 turn toward the left, when fac-
ing the valve.
Left Tank: Fuel flows from the left tank when the
selector is turned 1/4 turn toward the right, when fac-
ing the vlave.	Located on oil cooler behind seat.

FOOT LIFT PEDAL

The foot lift pedal A, allows the operator to raise the mower deck to the highest position without removing his/her hands from the traction controls.

To use the foot lift pedal A, press on it to raise the deck. The picture shows the foot lift pedal mounted on the RH side of the machine. If you prefer to have the foot mounted lift pedal on the left hand side, simply loosen the existing hardware and mount the foot lift pedal in a similar manner to the left hand side. Tighten the hardware to secure the foot lift pedal.

19

Image 19

Contents OPERATOR’S Manual Wash Hands After Handling CaliforniaAlitec BMP Central Fabricators Gannon Gill WAIN-ROY Woods Important MessageTo the Dealer To the OwnerTable of Contents Become Alert SafetyPreparing for Safe Operation General Machine Operation Operating SafelyStarting Maneuvering Safely Interrupting operationSeat Belt Useage Mowing SlopesHydraulic System Maintenance Safety GeneralBlades FuelStorage Safety BatteryJump Starting Labels OFF LH Tank RH Tank Hydraulic OIL Operators Manual is Located Under the Foot PlateTRANSPORT5 NN N At operators right side ControlsTurns during forward movement Lift and traction levers operators right sideTurns during reverse movement Foot Lift Pedal Parking brake in on position Operators left side Pushing the MachineCompartment beneath the seat Viewed from above PRE-OPERATION Check List OWNER’S Responsibility PRE-OPERATION Check ListOperator Presence Interlock System OperationFueling Before Starting the EngineDriving Operating NotesCutting Tips CuttingMachine Maintenance ChartEngine HydraulicsGeneral Maintenance RecordBattery MaintenanceCheck Daily Lubrication After First Five 5 Hours Hydraulic SystemPeriodic OIL Changes Spark Plugs Engine OILFuel Filter To replace air cleaner elements Heavy Duty Cyclonic AIR CleanerEngine Cooling Washing Machine Cleaning MachineBlade Balance Blade InstallationBlade Removal SharpeningDeck Leveling AdjustmentsCounterbalance Springs Front Deck LIP Height of cut ranges for roller adjustmentHeight of CUT Rear Deck RollersFor clarity brake in on position Parking brake assembly tire and deck not shownControl Levers Parking BrakeReverse Return Hydrostat AdjustmentsRight side adjustments NeutralTracking Handles Cutterdeck BeltDampers PUMP-DRIVE Belt Belt ReplacementLimited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company