Woods Equipment MZ2252K manual Belt Replacement, PUMP-DRIVE Belt

Page 39

WOODS

BELT REPLACEMENT

PUMP-DRIVE BELT

1.Remove engine-cutterdeck belt (see engine-cutterdeck belt replacement).

2.Attach an extension to a 3/8" drive ratchet. Insert the ratchet extension in the square hole of the pump drive idler arm. Use the ratchet handle to rotate it enough to remove the pump drive belt.

3.Install a new pump drive belt in the same manner as it was removed.

4.Re-install engine-cutterdeck belt (see engine-cutterdeck belt replacement).

39

Image 39

Contents OPERATOR’S Manual Wash Hands After Handling CaliforniaAlitec BMP Central Fabricators Gannon Gill WAIN-ROY Woods Important MessageTo the Dealer To the OwnerTable of Contents Become Alert SafetyPreparing for Safe Operation Machine Operation Operating Safely GeneralStarting Maneuvering Safely Interrupting operationSeat Belt Useage Mowing SlopesHydraulic System Maintenance Safety GeneralBlades FuelBattery Storage SafetyJump Starting Labels OFF LH Tank RH Tank Hydraulic OIL Operators Manual is Located Under the Foot PlateTRANSPORT5 NN N At operators right side ControlsLift and traction levers operators right side Turns during forward movementTurns during reverse movement Foot Lift Pedal Pushing the Machine Parking brake in on position Operators left sideCompartment beneath the seat Viewed from above PRE-OPERATION Check List OWNER’S Responsibility PRE-OPERATION Check ListOperator Presence Interlock System OperationFueling Before Starting the EngineDriving Operating NotesCutting Tips CuttingMachine Maintenance ChartEngine HydraulicsGeneral Maintenance RecordMaintenance BatteryCheck Daily Lubrication Hydraulic System After First Five 5 HoursPeriodic OIL Changes Engine OIL Spark PlugsFuel Filter Heavy Duty Cyclonic AIR Cleaner To replace air cleaner elementsEngine Cooling Washing Machine Cleaning MachineBlade Balance Blade InstallationBlade Removal SharpeningAdjustments Deck LevelingCounterbalance Springs Front Deck LIP Height of cut ranges for roller adjustmentHeight of CUT Rear Deck RollersFor clarity brake in on position Parking brake assembly tire and deck not shownControl Levers Parking BrakeReverse Return Hydrostat AdjustmentsRight side adjustments NeutralCutterdeck Belt Tracking HandlesDampers PUMP-DRIVE Belt Belt ReplacementLimited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company