Woods Equipment MZ2252K manual PRE-OPERATION Check List OWNER’S Responsibility

Page 21

WOODS

PRE-OPERATION CHECK LIST

PRE-OPERATION CHECK LIST

 

 

 

 

(OWNER’S RESPONSIBILITY)

 

 

___

Review and follow all safety rules and safety

___

Never allow riders.

 

decal instructions.

___

Inspect area and remove stones, branches or

___

Check that all safety decals are installed and in

 

other hard objects that might be thrown,

 

good condition. Replace if damaged.

 

causing injury or damage.

___

Check to make sure all shields and guards

___

Clean area around oil fill dipstick. Remove

 

are properly installed and in good condition.

 

dipstick and check to be sure oil is in operating

 

Be sure that either the discharge shield or

 

range (between marks on dipstick). Add oil if

 

complete vacuum attachment is installed.

 

necessary but Do Not Overfill. Install dipstick

___

Check that all hardware is properly installed.

 

assembly firmly until cap bottoms out on tube.

 

and secured.

 

Dipstick assembly must always be secured into

___

Check that equipment is properly and securely

 

fill tube when engine is running.

 

attached to power unit.

___

Check all lubrication points and grease as

___

Check to be sure engine is free of dirt and

 

instructed in manual.

 

debris. Pay particular attention to the cooling

___

Check hydrostatic fluid level. Check to be sure

 

fins, governor parts and muffler. Clean air

 

cooling fins on hydrostat are clean.

 

intake screen. Check air cleaner; service if

___

Perform a functional check of the safety

 

necessary.

 

interlock system each time you operate the

 

 

 

unit.

 

 

 

 

 

 

 

 

21

Image 21
Contents OPERATOR’S Manual Wash Hands After Handling CaliforniaTo the Dealer Important MessageTo the Owner Alitec BMP Central Fabricators Gannon Gill WAIN-ROY WoodsTable of Contents Become Alert SafetyPreparing for Safe Operation Machine Operation Operating Safely GeneralStarting Maneuvering Safely Interrupting operationSeat Belt Useage Mowing SlopesBlades Maintenance Safety GeneralFuel Hydraulic SystemBattery Storage SafetyJump Starting Labels OFF LH Tank RH Tank Hydraulic OIL Operators Manual is Located Under the Foot PlateTRANSPORT5 NN N At operators right side ControlsLift and traction levers operators right side Turns during forward movementTurns during reverse movement Foot Lift Pedal Pushing the Machine Parking brake in on position Operators left sideCompartment beneath the seat Viewed from above PRE-OPERATION Check List OWNER’S Responsibility PRE-OPERATION Check ListFueling OperationBefore Starting the Engine Operator Presence Interlock SystemDriving Operating NotesCutting Tips CuttingEngine Maintenance ChartHydraulics MachineGeneral Maintenance RecordMaintenance BatteryCheck Daily Lubrication Hydraulic System After First Five 5 HoursPeriodic OIL Changes Engine OIL Spark PlugsFuel Filter Heavy Duty Cyclonic AIR Cleaner To replace air cleaner elementsEngine Cooling Washing Machine Cleaning MachineBlade Removal Blade InstallationSharpening Blade BalanceAdjustments Deck LevelingCounterbalance Springs Height of CUT Height of cut ranges for roller adjustmentRear Deck Rollers Front Deck LIPControl Levers Parking brake assembly tire and deck not shownParking Brake For clarity brake in on positionRight side adjustments Hydrostat AdjustmentsNeutral Reverse ReturnCutterdeck Belt Tracking HandlesDampers PUMP-DRIVE Belt Belt ReplacementLimited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company