Woods Equipment MZ2252K manual Lubrication

Page 28

MAINTENANCE

WOODS

6

1

2 2

2		4
2
		5
	3	4
	3

2 2

6

LUBRICATION

Every 50 hours of operation, lubricate the following points (1-4) with grease:

1.Deck lift rockshaft (1 point)

2.Deck lift pivots (6 points)

3.Brake lever pivot (1 point)

4.Push arms (2 points located at rear of cutterdeck under each fuel tank)

5.Isolation mounts (4 points located under seatt at front of machine)

6.Caster wheel pivots (2 points)

(Lubricate every 500 hours or once a year)

NOTE ON BLADE SPINDLES - The blade spindles on these machines use a superior sealed bearing that does not require relubrication.

28

Image 28

Contents OPERATOR’S Manual California Wash Hands After HandlingImportant Message To the DealerTo the Owner Alitec BMP Central Fabricators Gannon Gill WAIN-ROY WoodsTable of Contents Safety Become AlertPreparing for Safe Operation General Machine Operation Operating SafelyStarting Interrupting operation Maneuvering SafelyMowing Slopes Seat Belt UseageMaintenance Safety General BladesFuel Hydraulic SystemStorage Safety BatteryJump Starting Labels OFF LH Tank RH Tank Operators Manual is Located Under the Foot Plate Hydraulic OILTRANSPORT5 NN N Controls At operators right sideTurns during forward movement Lift and traction levers operators right sideTurns during reverse movement Foot Lift Pedal Parking brake in on position Operators left side Pushing the MachineCompartment beneath the seat Viewed from above PRE-OPERATION Check List PRE-OPERATION Check List OWNER’S ResponsibilityOperation FuelingBefore Starting the Engine Operator Presence Interlock SystemOperating Notes DrivingCutting Cutting TipsMaintenance Chart EngineHydraulics MachineMaintenance Record GeneralBattery MaintenanceCheck Daily Lubrication After First Five 5 Hours Hydraulic SystemPeriodic OIL Changes Spark Plugs Engine OILFuel Filter To replace air cleaner elements Heavy Duty Cyclonic AIR CleanerEngine Cooling Cleaning Machine Washing MachineBlade Installation Blade RemovalSharpening Blade BalanceDeck Leveling AdjustmentsCounterbalance Springs Height of cut ranges for roller adjustment Height of CUTRear Deck Rollers Front Deck LIPParking brake assembly tire and deck not shown Control LeversParking Brake For clarity brake in on positionHydrostat Adjustments Right side adjustmentsNeutral Reverse ReturnTracking Handles Cutterdeck BeltDampers Belt Replacement PUMP-DRIVE BeltLimited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company