Stow manual Stow G-2.9R Rules for Safe Operation

Page 11

STOW G-2.9R — RULES FOR SAFE OPERATION

■ALWAYS be sure the operator is familiar with proper safety precautions and operation techniques before using generator.

■NEVER leave the generator unattended, turn off engine when unattended.

■Unauthorized equipment modifications will void all warranties.

■ALWAYS ensure generator is on level ground before use.

■DO NOT place hands or fingers inside generator engine compartment when engine is running.

■NEVER run engine without air cleaner. Severe engine damage may occur.

■NEVER change or adjust the engine speed which has been set at the factory prior to shipping.

Power Cord Safety

■NEVER let power cables or cords lay in water.

■NEVER stand in water while AC power from the generator is being transfer to a load.

■NEVER use a defective or frayed power cable. Check the cable for cuts in the insulation.

■NEVER use a extension cord that is frayed or damaged where the insulation has been cut.

■ALWAYS make certain that proper power or extension cord has been selected for the job See Table 3.

Grounding Safety

■ALWAYS make sure that electrical circuits are properly grounded per the National Electrical Code (NEC) and local codes before operating generator. Severe injury or death! by electrocution can result from operating an ungrounded generator.

■ALWAYS make sure generator is properly grounded to a suitable earth ground (GROUND ROD). See installation section in this manual.

■NEVER use gas piping as an electrical ground.

Maintenance Safety

■NEVER lubricate components or attempt service on a running machine.

■HighTemperatures – Always stop engine and allow the engine to cool before adding fuel, oil or performing service and maintenance functions. Contact with hot! components can cause serious burns.

■Keep the machinery in proper running condition.

■Fix damage to the machine immediately and replace any broken parts immediately.

■ALWAYS replace any worn or damaged warning decals.

■ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children and un-authorized personnel.

■The electrical voltage required to operate the generator can cause severe injury or even death through physical contact with live circuits. Turn all circuit breakers OFF before performing maintenance on the generator.

■Dispose of hazardous waste properly.Examples of potentially hazardous waste are used motor oil, fuel and fuel filters.

■DO NOT use food or plastic containers to dispose of hazardous waste.

■DO NOT pour waste, oil or fuel directly onto the ground, down a drain or into any water source.

■Removing the engine oil drain plug while the engine is hot will result in hot oil to gush out of the oil drain plug, therefore causing severescaldingtoanypersonsinthegeneral area of the generator.

STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model G-2.9R Page Heres HOW to GET Help Table of Contents When ordering parts Please supply the following information Parts Ordering ProceduresDimensions Stow G-2.9R DimensionsEffects of Altitude and Heat SpecificationsRespiratory Hazards Stow G-2.9R Safety Message Alert SymbolsBurn Hazards Rotating Parts Hazards Equipment DamageRead this manual Stow G-2.9R Rules for Safe OperationStow G-2.9R Rules for Safe Operation Emergencies Stow G-2.9R Rules for Safe OperationPage Machine Safety Decals Operation and Safety Decals S/N 5497956 and belowOperation and Safety Decals S/N 5497957 and Above Excitation System Stow G-2.9R General InformationStow G-2.9R Familarization Control PanelExtension Cables Single Phase LoadStow G-2.9R Load Application Generator Controls and Components Stow G-2.9R Controls and IndicatorsStow G-2.9R Controls and Indicators Generator Refueling Stow G-2.9R Generator RefuelingMounting Stow G-2.9R InstallationOutdoor Installation Indoor InstallationConnecting the Ground Stow G-2.9R InstallationMain Circuit Breaker General Inspection Prior to Operation Ground Power ToolsStow G-2.9R PRE-INSPECTION Extension CableFuel Check Stow G-2.9R PRE-INSPECTION EngineBefore Starting Engine Oil CheckBefore Starting the Engine Stow G-2.9R Initial START-UP EngineStopping The Engine Connecting the LoadStow G-2.9R Initial START-UP ENGINE/OPERATION Generator Storage Stow G-2.9R Preparation for Long -TERM StorageEngine Maintenance Schedule Stow G-2.9R Maintenance EngineMaintenance Stow G-2.9R Maintenance EngineCleaning the Fuel Strainer Generator/Engine Wiring Diagram S/N 5497956 and Below Stow G-2.9R Wiring Diagram S/N 5497956 and belowStow G-2.9R Wiring Diagram S/N 5497957 and Above Engine Troubleshooting Stow G-2.9R -TROUBLESHOOTING EngineStow G-2.9R -TROUBLESHOOTING Engine Generator Troubleshooting Stow G-2.9R -TROUBLESHOOTING GeneratorPage Items Found In the Items Number Column How to read the marks and remarks used in this parts bookStow G-2.9R Explanation of Code in Remarks Column To 3 Units Stow G-2.9R Suggested Spare PartsStow G-2.9R Name Plate and Decals S/N 5497956 and below Stow G-2.9R Name Plate and Decals S/N 5497956 and below Stow G-2.9R Name Plate and Decals S/N 5497957 and Above Part Name QTY Remarks Stow G-2.9R Generator Assy SET BOLT, Rotor Stow G-2.9R Control BOX ASSY. S/N 5497956 and below Stow G-2.9R Control BOX ASSY. S/N 5497956 and below Stow G-2.9R Control BOX ASSY. S/N 5497957 and Above Stow G-2.9R Control BOX ASSY. S/N 5497957 and Above Stow G-2.9R Pipe Frame ASSY. S/N 5497956 and below Fuel GAUGE, CJ- 58A Stow G-2.9R Pipe Frame ASSY. S/N 5497956 and belowStow G-2.9R Pipe Frame ASSY. S/N 5497956 and Above A2417000302 Robin EX170D20210 Crankcase Assy Robin EX170D20210- Crankcase Assy Robin EX170D20210 Crankshaft and Piston Assy Crankshaft Assy Robin EX170D20210 Governor Assy Part Name QTY. Remarks Robin EX170D20210 Intake and Exhaust Assy PIN, CAM Shaft Robin EX170D20210 AIR Cleaner Assy Robin EX170D20210 AIR Cleaner Assy Robin EX170D20210 Cooling Starting Assy Blower Housing CP, Yellow Robin EX170D20210 -CARBURETOR Assy Robin EX170D20210 Carburetor Assy Robin EX170D20210 Flywheel Assy Part Name QTY Robin EX170D20210 Electric Device Assy OIL Sensor CP Terms and Conditions of Sale Parts Terms and Conditions of Sale Stow Construction EquipmentPage Your Local Dealer is

G-2.9R specifications

The Stow G-2.9R is an innovative and highly versatile piece of equipment designed for a variety of applications, making it a valuable asset in various industries. This unit stands out for its unique combination of power, efficiency, and user-friendly features, ensuring that it meets the demands of both professionals and casual users alike.

One of the main features of the Stow G-2.9R is its robust engine, which is designed to deliver reliable performance. With a powerful output, the engine allows users to tackle demanding tasks with ease, whether it’s in landscaping, construction, or maintenance jobs. The efficient fuel consumption of the G-2.9R not only reduces operational costs but also minimizes environmental impact, making it an eco-friendly choice for users conscious of their carbon footprint.

The Stow G-2.9R is equipped with advanced technologies that enhance its performance and usability. The integrated electronic controls provide precise management of operations, allowing users to finely tune the machine's settings according to specific requirements. This level of precision is particularly beneficial in applications such as turf management or industrial cleaning, where different surfaces and conditions may require specific adjustments.

Another noteworthy characteristic of the Stow G-2.9R is its compact design. Built for maneuverability, this machine can easily navigate tight spaces without sacrificing power or efficiency. The lightweight construction allows for easy transportation, making it suitable for different job sites. Its geometrically designed chassis ensures stability and balance during operation, enhancing safety for the user.

Furthermore, the G-2.9R also boasts ergonomic controls and comfortable handling features. The adjustable components allow users to customize their experience, which contributes to reduced fatigue during extended use. Safety features are also a priority, with mechanisms in place to protect the operator and nearby workers from potential hazards.

Durability is another key aspect of the Stow G-2.9R, as it is built with high-quality materials that withstand wear and tear in challenging working environments. The machine is designed for longevity, making it a cost-effective investment for users.

In summary, the Stow G-2.9R combines power, efficiency, advanced technology, and user-centered design to deliver exceptional performance across a wide range of applications. Its adaptable nature ensures that it meets the varying needs of users, positioning it as a reliable choice in the marketplace.
Top Page Image Contents