Stow Stow G-2.9R Initial START-UP ENGINE/OPERATION, Stopping The Engine, Connecting the Load

Page 26

STOW G-2.9R — INITIAL START-UP ENGINE/OPERATION

6.If the engine has started, slowly return the choke lever (Figure 12 ) to the “OPEN” position. If the engine has not started repeat steps 1 through 5.

7.Beforethegeneratorisplacedintooperation,runtheengine for 3-5 minutes. Check for abnormal smells, fuel leaks, and noises that would associate with lose components.

8.Refer to the AC voltmeter (Figure 16) on the control box. The voltage indicated on the voltmeter should be 120 VAC with no load applied.

Stopping The Engine

Normal Shutdown

1.Place the main circuit breaker (Figure 10) in the OFF position.

2.Remove the load from the generator, and let the engine run at idle for 3-5 minutes with the idle control switch in the ON position (Up)

3.Place the operation switch (Figure 17) in the OFF position S/N 5497956 and below).

Figure 19. Operation Switch (OFF)

Figure 16. AC Voltmeter (120 VAC)

11.If desired, verify with a voltmeter (Figure17) that 120 VAC is present at the GFCI duplex receptacle and the 120V twist-lock receptacle (S/N 5497957 and above).

Figure 17. 120 VAC GFCI Receptacle

5.Place the engine ON/OFF switch (Figure 20) in the "OFF" position. This step applies to units with S/N 5497957 and above.

Figure 20. Engine ON/OFF Switch (OFF)

6.Place the engine fuel valve lever (Figure 21) to the "OFF" position.”

Connecting the Load

1.Connect the load to the output receptacles.

2.Place the main circuit breaker (Figure 18) in the ON position.

Figure 21. Engine Fuel Valve Lever (OFF Position)

Emergency Showdown

1.Place the operation switch or engine ON/OFF swith (Figures19 or 20) in the "OFF" position.

Figure 18. Main Circuit Breaker (ON)

PAGE 26 — STOW G-2.9R A.C. GENERATOR— OPERATION & PARTS MANUAL — REV. #1 (10/28/04)

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Model G-2.9R Page Heres HOW to GET Help Table of Contents Parts Ordering Procedures When ordering parts Please supply the following informationStow G-2.9R Dimensions DimensionsSpecifications Effects of Altitude and HeatRespiratory Hazards Stow G-2.9R Safety Message Alert SymbolsBurn Hazards Equipment Damage Rotating Parts HazardsStow G-2.9R Rules for Safe Operation Read this manualStow G-2.9R Rules for Safe Operation Stow G-2.9R Rules for Safe Operation EmergenciesPage Operation and Safety Decals S/N 5497956 and below Machine Safety DecalsOperation and Safety Decals S/N 5497957 and Above Control Panel Stow G-2.9R General InformationStow G-2.9R Familarization Excitation SystemExtension Cables Single Phase LoadStow G-2.9R Load Application Stow G-2.9R Controls and Indicators Generator Controls and ComponentsStow G-2.9R Controls and Indicators Stow G-2.9R Generator Refueling Generator RefuelingIndoor Installation Stow G-2.9R InstallationOutdoor Installation MountingStow G-2.9R Installation Connecting the GroundExtension Cable General Inspection Prior to Operation Ground Power ToolsStow G-2.9R PRE-INSPECTION Main Circuit BreakerEngine Oil Check Stow G-2.9R PRE-INSPECTION EngineBefore Starting Fuel CheckStow G-2.9R Initial START-UP Engine Before Starting the EngineStopping The Engine Connecting the LoadStow G-2.9R Initial START-UP ENGINE/OPERATION Stow G-2.9R Preparation for Long -TERM Storage Generator StorageStow G-2.9R Maintenance Engine Engine Maintenance ScheduleMaintenance Stow G-2.9R Maintenance EngineCleaning the Fuel Strainer Stow G-2.9R Wiring Diagram S/N 5497956 and below Generator/Engine Wiring Diagram S/N 5497956 and BelowStow G-2.9R Wiring Diagram S/N 5497957 and Above Stow G-2.9R -TROUBLESHOOTING Engine Engine TroubleshootingStow G-2.9R -TROUBLESHOOTING Engine Stow G-2.9R -TROUBLESHOOTING Generator Generator TroubleshootingPage Items Found In the Items Number Column How to read the marks and remarks used in this parts bookStow G-2.9R Explanation of Code in Remarks Column Stow G-2.9R Suggested Spare Parts To 3 UnitsStow G-2.9R Name Plate and Decals S/N 5497956 and below Stow G-2.9R Name Plate and Decals S/N 5497956 and below Stow G-2.9R Name Plate and Decals S/N 5497957 and Above Part Name QTY Remarks Stow G-2.9R Generator Assy SET BOLT, Rotor Stow G-2.9R Control BOX ASSY. S/N 5497956 and below Stow G-2.9R Control BOX ASSY. S/N 5497956 and below Stow G-2.9R Control BOX ASSY. S/N 5497957 and Above Stow G-2.9R Control BOX ASSY. S/N 5497957 and Above Stow G-2.9R Pipe Frame ASSY. S/N 5497956 and below Stow G-2.9R Pipe Frame ASSY. S/N 5497956 and below Fuel GAUGE, CJ- 58AStow G-2.9R Pipe Frame ASSY. S/N 5497956 and Above A2417000302 Robin EX170D20210 Crankcase Assy Robin EX170D20210- Crankcase Assy Robin EX170D20210 Crankshaft and Piston Assy Crankshaft Assy Robin EX170D20210 Governor Assy Part Name QTY. Remarks Robin EX170D20210 Intake and Exhaust Assy PIN, CAM Shaft Robin EX170D20210 AIR Cleaner Assy Robin EX170D20210 AIR Cleaner Assy Robin EX170D20210 Cooling Starting Assy Blower Housing CP, Yellow Robin EX170D20210 -CARBURETOR Assy Robin EX170D20210 Carburetor Assy Robin EX170D20210 Flywheel Assy Part Name QTY Robin EX170D20210 Electric Device Assy OIL Sensor CP Terms and Conditions of Sale Stow Construction Equipment Terms and Conditions of Sale PartsPage Your Local Dealer is

G-2.9R specifications

The Stow G-2.9R is an innovative and highly versatile piece of equipment designed for a variety of applications, making it a valuable asset in various industries. This unit stands out for its unique combination of power, efficiency, and user-friendly features, ensuring that it meets the demands of both professionals and casual users alike.

One of the main features of the Stow G-2.9R is its robust engine, which is designed to deliver reliable performance. With a powerful output, the engine allows users to tackle demanding tasks with ease, whether it’s in landscaping, construction, or maintenance jobs. The efficient fuel consumption of the G-2.9R not only reduces operational costs but also minimizes environmental impact, making it an eco-friendly choice for users conscious of their carbon footprint.

The Stow G-2.9R is equipped with advanced technologies that enhance its performance and usability. The integrated electronic controls provide precise management of operations, allowing users to finely tune the machine's settings according to specific requirements. This level of precision is particularly beneficial in applications such as turf management or industrial cleaning, where different surfaces and conditions may require specific adjustments.

Another noteworthy characteristic of the Stow G-2.9R is its compact design. Built for maneuverability, this machine can easily navigate tight spaces without sacrificing power or efficiency. The lightweight construction allows for easy transportation, making it suitable for different job sites. Its geometrically designed chassis ensures stability and balance during operation, enhancing safety for the user.

Furthermore, the G-2.9R also boasts ergonomic controls and comfortable handling features. The adjustable components allow users to customize their experience, which contributes to reduced fatigue during extended use. Safety features are also a priority, with mechanisms in place to protect the operator and nearby workers from potential hazards.

Durability is another key aspect of the Stow G-2.9R, as it is built with high-quality materials that withstand wear and tear in challenging working environments. The machine is designed for longevity, making it a cost-effective investment for users.

In summary, the Stow G-2.9R combines power, efficiency, advanced technology, and user-centered design to deliver exceptional performance across a wide range of applications. Its adaptable nature ensures that it meets the varying needs of users, positioning it as a reliable choice in the marketplace.
Top Page Image Contents