STOW G-2.9R — RULES FOR SAFE OPERATION
During operation of this generation, there exists the possibility of electrocution, electrical shock or burn, which can cause severe bodily harm or even
DEATH!
To avoid these hazards:
NEVER use damaged or worn cables when connecting equipment to the generator. Make sure power connecting cables are securely connected to the generator’s output receptacles, incorrect connections may cause damage to the generator and electrical shock.
NEVER grab or touch a live power cord with wet hands, the possibility exist of electrical shock, electrocution, and even death!
NEVER insert any objects into the output receptacles during operation. This is extremely dangerous. ALWAYS
the generator and place all circuit breakers in the “OFF” position when contact with the output receptacles is required. There exist the possibility of electrocution, electrical shock or burn, which can cause severe bodily harm or even death!
Backfeed to a utility system can cause electrocution and or property damage. NEVER connect the generator to a building's electrical system without a transfer switch or other approved device. All installations should be performed by a licensed electrician in accordance with all applicable laws and electrical codes. Failure to do so could result in electrical shock or burn causing serious injury or even death!
Emergencies
■ALWAYS know the location of the nearest fire extinguisher.
■ALWAYS know the location of the nearest first aid kit.
■In emergencies always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.
PAGE 12 — STOW