Installation |
| 3 | |
1 | Do Not Run Pump Dry! | 2 |
|
|
| 1/2" or Larger |
|
|
| Outlet Hose |
|
Oil | IN |
| 1/2" or Larger |
OUT | Reinforced | ||
|
| IN | Inlet Hose |
|
|
| |
|
| Water OUT |
|
|
| Water IN |
|
| IN |
|
|
| USE 1/2" HOSE (OR LARGER) | |
| Use a reinforced hose on the inlet. The | |
| ||
OIL THE PUMP | pump should be less than 10’ above and | |
less than 25’ to one side of the water | ||
Oil the pump with 1/2 tablespoon food | source. Make the outlet hose as short as | |
grade mineral or vegetable oil with each | possible – 25’ or less. | |
use. Pour the oil in the ‘IN’ port. Three 1/2 | Check the washer in the inlet fitting to | |
tablespoon oil packets are included. | ||
make sure it is airtight. If this joint leaks | ||
NOTICE: The pump depends on the liquid | ||
air, the pump will not operate. | ||
being pumped for lubrication. |
|
DO NOT RUN THE PUMP DRY!
If the pump does not start to move water in 30 seconds or less, recheck the installation and plumbing.
Mount the pump solidly on a stable platform.
For parts or assistance, call Simer Customer Service at