Shindaiwa EB633RT, 82050 manual EPA Phase 2/ C.A.R.B. Tier, Equipment Check, Emission Control

Page 6

English

Equipment Check

WARNING

Use only Shindaiwa approved attachments. Serious injury may result from the use of a non-approved attach- ment combination. Shindaiwa, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by Shindaiwa. Read and comply with all safety instruc- tions listed in this manual and safety manual.

Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.

Inspect fuel lines, tank and area around carburetor for fuel leaks. DO NOT operate unit if leaks are found.

Do not use blower if any part is missing or damaged.

Have repairs done only by an authorized Shindaiwa Service dealer.

Do not use any attachment, accessory or replacement part unless it is recommended in this Operator's Manual.

Emission Control

EPA Phase 2/ C.A.R.B. TIER III

The emission control system for the engine is EM/TWC (Engine Modification and 3-way Catalyst) and for the fuel tank the

Control System is EVAP (Evaporative Emissions). Evaporative emission may be applicable to California models only.

IMPORTANT ENGINE INFORMATION

ENGINE FAMILY: 7EHXS.0214EKG DISPLACEMENT: 21.2 cc

EMISSION COMPLIANCE PERIOD : 300 HRS.

THIS ENGINE MEETS U.S. EPA PH2 EXH AND 2007 AND

LATER CALIFORNIA EXH AND EVAP EMISSION REGULA-

TIONS FOR S.O.R.E.. REFER TO OWNER'S MANUAL FOR

MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.

An Emission Control Label is located on the unit. (This is an EXAMPLE ONLY, information on label varies by engine FAMILY).

PRODUCT EMISSION DURABILITY

The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual.

Image 6
Contents EB633RT Blower Table of Contents IntroductionOperators manual Safety Manual safety symbols and important information International symbolsPersonal condition and safety equipment Hand Protection Physical ConditionEye Protection Breathing ProtectionClear the Work Area Repetitive Stress InjuriesRead the Manuals Keep a Firm GripEmission Control EPA Phase 2/ C.A.R.B. TierEquipment Check Product Emission DurabilityLocated on blower housing Hot Decal near mufflerDescription Contents Assembly Install blower pipesFuel Requirements Handling FuelOperation Fuel Starting cold engine MetricStarting warm engine Stopping engineOperating blower Maintenance Maintenance intervalsSkill level Air filter LevelFuel filter Spark plugCleaning Cylinder Fins Cooling systemSpark Arrestor Screen Cylinder Exhaust PortExhaust system High Altitude Adjustment Carburetor adjustmentEngine Break-In Troubleshooting Troubleshooting ChartLong Term Storage Over 30 Days StorageSpecifications EB633RTWhat does this Warranty COVER? Manufacturers Warranty CoverageOwners Warranty Responsibilities HOW will a Covered Part be CORRECTED?English Sopladora EB633RT Introducción Manual del operadorTabla de materias Símbolos internacionales Condición personal y equipos de seguridadProtección de las manos Condición físicaProtección de los ojos Protección respiratoriaLesiones debidas a esfuerzos repetitivos PeligroFase 2 de EPA / Nivel III de C.A.R.B EquiposControl de emisiones Ubicada en la cubierta del soplador Calcomanías de caliente cerca del silenciadorCalcomania de ruido DescripciónContenido Ensamblar Instale los tubos del sopladorNota Operación Requisitos del combustibleManipulación del combustible CombustibleCombustible, continuación Arranque de un motor en fríoArranque del motor caliente Parada del motorOperación del soplador Intervalos de mantenimiento MantenimientoNivel de habilidad ¡IMPORTANTEFiltro de aire AvisoFiltro de combustible BujíaSistemas de enfriamiento Limpieza de la parrillaRejilla del apagachispas Orificio de escape del cilindroRodaje del motor Ajuste de altitud elevadaAjuste del carburador Localización y reparación de fallas Almacenamiento Almacenamiento a largo plazo más de 30 díasEspecificaciones Relacionados CON Emisiones EPA Phase 2 / California Relacionados CON LAS Emisiones EPA PhaseCalifornia Tier III Emissions Defect Warranty EN Pequeños Motores DE ExterioresNotas EB633RT Soufflante Le manuel d’utilisation Table des matièresSécurité Symboles de sécurité et informations importantes AvertissementProtection des mains Condition physiqueProtection des yeux Protection des voies respiratoiresMicrotraumatismes répétés Lisez les manuelsVérifiez l’équipement Contrôle des émissionsDurabilité DU Contrôle DES Émissions Category Sur le corps de la soufflanteContenu Installation des tubes de soufflante AssemblageRemarque Utilisation Spécifications pour le carburantManipulation du carburant CarburantCarburant, continué Démarrage d’un moteur froidDémarrage d’un moteur chaud Arrêt du moteurFR13 Entretien Niveaux de difficulteIntervalles d’entretien Filtre à air AvisFiltre à carburant BougieSystème de refroidissement Nettoyage de la grillePare-étincelles Lumière d’échappement du cylindreSystème d’échappement Rodage du moteur Réglage pour haute altitudeRéglage du carburateur Dépannage Remisage à long terme plus de 30 jours RemisageCaractéristiques CE QUE Couvre Cette Garantie Couverture DE LA Garantie DES FabricantsResponsabilités DU Propriétaire À L’ÉGARD DE LA Garantie EN CAS DE Pièce Défectueuse

82050, EB633RT specifications

The Shindaiwa EB633RT is a top-of-the-line backpack blower designed for professional landscaping and heavy-duty yard work. Known for its power, efficiency, and user-friendly features, the EB633RT stands out in the competitive market of outdoor power equipment.

At the heart of the EB633RT is a reliable 63.3cc two-stroke engine, which produces a remarkable air velocity of up to 210 mph and an air volume of 510 CFM. This combination of power and airflow makes it highly effective for cleaning up leaves, debris, and even small branches, making it an ideal tool for both residential users and commercial landscapers.

The EB633RT incorporates Shindaiwa's unique "Electronic Fuel Injection" (EFI) technology. This innovative feature enhances fuel efficiency, reduces emissions, and improves cold starting performance. As a result, users can enjoy longer run times with fewer trips to refill the tank, leading to increased productivity and reduced environmental impact.

Another standout characteristic of the Shindaiwa EB633RT is its ergonomic design. The backpack is equipped with a padded, adjustable harness that provides comfort during extended use. This feature allows for optimal weight distribution, minimizing strain on the user’s back and shoulders. The blower also has a flexible tube design, which aids in maneuverability, allowing users to reach tight spaces with ease.

The EB633RT also comes with a user-friendly starting system, ensuring that the blower can be easily started even after prolonged periods of storage. With its easy-access air filter and spark plug, routine maintenance is made simple, allowing users to keep their equipment in optimal condition.

Durability is another strong point of the EB633RT. Constructed from robust materials, this blower is built to withstand the rigors of commercial use, ensuring longevity and reliability in various working conditions.

Overall, the Shindaiwa EB633RT is an exceptional choice for professionals seeking a powerful, efficient, and comfortable backpack blower. Its advanced technologies, high performance, and ergonomic design place it among the best in its class, making it a trusted companion for tackling the toughest landscaping challenges. Whether you are a professional landscaper or a dedicated homeowner, the EB633RT is equipped to handle your outdoor tasks with ease.