McIntosh C500 Mute, Mono, Trim, Input Source Selection, Disc, Server and Tape Functions, Volume

Page 27

How to Operate the Remote Control

How to Operate by Remote Control

The supplied Remote Control is capable of directly control- ling the functions of contemporary McIntosh Source Com- ponents connected to the C500.

Mute

Press the MUTE Push-button to mute audio. The Record Signals present at the CDR and SRVR OUTPUTS are not affected by the MUTE function. The C500 Front Panel Al- phanumeric Display will indicate the word MUTE. Press MUTE a second time to unmute audio.

Mono

Press the MODE Push-button to switch Mono Mode On or Off for the selected Listen Signal.

Trim

Press the TRIM Push-button, followed by the LEVEL UpS or DownT Push-button to select various sound adjustments and functions.

Note: Refer to “How to Operate the C500” starting on page 28 for additional information.

Input Source Selection

Press one of the appropriate Source Push-buttons or the In- put W or X Push-buttons to select the desired program source.

Note: When directly selecting sources with Title names ending with a “2” or “3”, the appropriate Numbered Push-button needs to be pressed after the push-button with the Titled Name is pressed; e.g. for Input DVD2, press the DVD Push-button followed by the “2” Push- button.

Disc, Server and Tape Functions

Use these push-buttons to operate a DVD Player, CD Player, CD Changer, Music Server or Tape Recorder.

Numbered Push-buttons

Press Push-buttons 0 through 9 to access tuner station pre- sets, tracks on discs or selections on a Music Server.

Disc and Track

Use the DISC and TRACK Push-buttons when a Disc Player or Music Server is being used.

Tuner Push-buttons

Press the AM or FM Push-button to select the desired broadcast band. Press and release the Channel UpS or DownTPush-button to move from station to station. Press and hold a Channel UpS or DownT Push-button to move continuously from station to station. Press +10 to start the

automatic brief audition of each of the presets stored in the tuner memory. Press +10 a second time to stop on a station preset and exit the Review process.

Volume

Press the UpS or DownT VOLUME Push-button to raise or lower the listening volume level.

Note: The Record Signals present at CDR and SRVR OUTPUTS are not affected by volume changes.

Amplifier Selection

Press the 2nd push-button followed by the OUTPUT 1 or 2 push-buttons to control the rear panel OUTPUTS 1, 2 which can feed signals to a power amplifier or other acces- sory component.

Acc On

Press ACC ON to turn the power ON to a McIntosh Disc Player.

Acc Off

Press ACC OFF to turn the power OFF to a McIntosh Disc Player.

Pause

Press Pushbutton to perform various functions on a vari- ety of McIntosh Components. It will also pause the playing of a disc or tape player. The Push-button will also allow for quick exiting from the active menu when in the setup mode. The Push-button is also used as an Enter Push-but- ton with some McIntosh components.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Controller/Preamplifier/Tube Preamplifier Important Safety Instructions Please Take a Moment Customer ServiceTable of Contents Thank YouConnector Information Important InformationIntroduction Introduction and Performance Features Side View of the C500C Dimensions17-1/2 Dimensions, con’t Installation Page Rear Panel Connections C500 Controller C500 PreamplifierC500 Tube Preamplifier Audio Connections How to connect the C500Power Control Connections Data Control ConnectionsPassthru Connections Power ConnectionsPage Page How to Operate the Setup Modes Firmware Version SetupDefault Settings Remote ControlTrigger a Voltage Power Control Volume DisplayMeter Illumination Setup, con’t Trigger B Voltage Power Control Triamp Balanced OutputsControl McIntosh MDA1000 Data Port Assigment Input Selection and Title ReassignmentTrim Level Adjustment Setup, con’tTrigger Selection Accessory ControlRecord Processor Listen ProcessorPassthru Mode Moving Magnet Cartridge CapacitanceMoving Coil Cartridge Resistance C500 Preamplifier or C500 Tube Preamplifier Setup, con’t and Setup Settings ChartsRemote Control Push-Buttons Trim VolumeMute MonoHow to Operate the C500 Power OnSource Selection Listen and Record External Processors Volume ControlSetup Mode How To Make a RecordingMono Mode Output MetersSpeaker Output 1 How to use the Passthru Mode How to Operate the C500, con’tConfiguration Change Reset of MicroprocessorsHow to Operate the C500, con’t and Technical Description Silent Audio SwitchingVolume Adjustments Fully Balanced Circuitry Meter and Circuitry Technical Description, con’tMoving Coil Preamplifier Logic Controlled CircuitryBlock Diagrams Power Supply CircuitsSpecifications C500 Tube Preamplifier Specifications C500 Preamplifier and C500 Tube PreamplifierOverall Dimensions Specifications C500 Controller and GeneralGeneral Specifications Power RequirementsPacking Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY
Top Page Image Contents