McIntosh owner manual How to Operate the C500, con’t, How to use the Passthru Mode

How to Operate the C500, con’t

Trim Function	Adjustment	Figure
		Numbers
Input Volume Trim	+6dB to -6dB	75a and b
Balance Level	(Left)107dB to (Right)107dB	76
Mono (Stereo)	On or Off	77a and b
Speaker 1	On or Off	78a and b
Speaker 2	On or Off	79a and b
Display	1-7	80a and b
Meters	On or Off	81a and b
Moving Magnet	50pf to 750pf	82a and b
Movig Coil	25 ohms to 1,000 ohms	83a and b

Figure 75a

Figure 75b

Figure 76

Figure 77a

Figure 77b

Figure 78a

Figure 78b

Figure 79a

Figure 79b

Figure 80a

Figure 80b

Figure 81a

Figure 81b

Figure 82a

Figure 82b

Figure 83a

Figure 83b

How to use the Passthru Mode

When the C500 is connected together with a McIntosh Mul- tichannel A/V Control Center or Surround Decoder and has the PASSTHRU MODE activated, it will automatically turn-on when the A/V Control Center or Surround Decoder is turned On. It will indicate on the Front Panel Alphanu- meric Display “PASSTHRU”. Refer to figure 84.

Figure 84

The C500C Front Panel Controls, Push-buttons and the Re- mote Control Push-buttons are deactivated as long as the Passthru Mode is active. The settings for the LISTEN and RECORD Processor and OUTPUTS 1&2 remain un- changed when the C500 is in the Passthru Mode.

31