Neuton CE 6.2 manual Charging the Battery in the Mower

Page 32

Charging the Battery

You must charge the Battery before using your Mower for the first time and after every use. You can charge the Battery in or out of the Mower. The performance of your Mower is the same, regardless of which charging method you choose.

WHILE THE BATTERY IN YOUR MOWER WAS CHARGED AT THE FACTORY, YOU MUST RECHARGE IT FULLY (EIGHT (8) TO TWENTY-FOUR (24) HOURS) BEFORE USING YOUR MOWER. OTHERWISE, YOU MAY DECREASE THE CHARGING CAPACITY OF THE BATTERY. AGAIN, USE ONLY THE CHARGER SUPPLIED WITH THE MOWER.

As the Battery ages, you may need to charge the Battery longer, even up to twenty-four (24) hours. A good time to consider purchasing a replacement Battery is when the Battery takes longer than twenty-four (24) hours to charge.

USE NORMAL HOUSEHOLD VOLTAGE (110 VOLTS) WHEN CHARGING THE BATTERY. PLUG THE CHARGER DIRECTLY INTO THE ELECTRICAL OUTLET. DO NOT ABUSE THE CORDS. NEVER CARRY THE CHARGER BY THE CORD. ALWAYS PULL THE PLUG – AND NOT THE CORD – WHEN DISCONNECTING THE CORDS FROM THE ELECTRICAL OUTLET (WALL OUTLET) AND FROM THE CHARGER.

NOTE: When using an extension cord with your Charger, use a heavy-duty extension cord of a type “suitable for outdoor use” (although you should never charge the Battery in the open outdoors).

ALWAYS CONNECT THE CHARGER TO THE BATTERY FIRST, AND THEN PLUG THE CHARGER INTO THE WALL OUTLET. WHEN UNPLUGGING, REVERSE THE PROCESS; UNPLUG THE CHARGER FROM THE WALL OUTLET FIRST, AND DISCONNECT IT FROM THE BATTERY.

Charging the Battery in the Mower

Figure 24

28

Charger in Mating Plug

1.

Make sure all four (4) Wheels of the Mower touch the

 

 

floor.

 

2.

Open the Access Cover and remove the Safety Key.

 

3.

Remove the Protective Plug from the Charger

 

 

Receptacle on top of the Battery and plug in the round

 

 

Charger Connector Plug (Figure 24).

 

4.

Plug the Charger into a wall outlet. The RED light on the

 

 

Battery will light up indicating a connection between

 

 

the Battery and Charger.

NOTE: A full charge takes at least eight (8) hours, and may take up to twenty-four (24) hours. For the first five (5) hours, the Charger will be warm to the touch. This is normal and does not indicate a problem.

1-866-NEUTON1 (638-8661) www.neutonpower.com

Image 32
Contents Battery-Powered Mower Safety & Operating InstructionsNEUTON→ Power Equipment Thank YouDirector, Customer Relations Toll-Free phone 1-866-NEUTON1Table of Contents Optional MA 3.6 Trimmer and MA 5.6 Striper Roller About this Manual Introducing the Neuton Mower CEConventions used in this Manual Safety and Information Labels Important Safety ConsiderationsBattery Operating Tips Label Battery Insertion Label Protecting Yourself and Those around You Dressing AppropriatelyPreparing to Use Your Mower or Trimmer Operating Your Mower or Trimmer Safely Handling the Battery Safely NEUTON1 Neuton Mower Package ChecklistSetting Up Your Neuton Mower Safety Key Read the Safety & Operating Instructions before proceeding Assembling Your Neuton MowerCharge the Battery before Your First Use Adjust the Handlebar HeightRemove the Battery Mulching Plug Rear Bagger Assembling the Bag to the Bag FrameInstalling the Bagger Removing and Emptying the BaggerInsert the Battery after Being Fully Charged Your Fully Assembled Neuton Mower Controls and Features ⇒ Safety Key⇒ Power/Mode Switch ⇒ Analog Voltage Gauge⇒ Status Indicator Light ⇒ Cutting Height LeverAnalog Voltage Gauge Neuton CE 6.2 Product Specifications Page Pre-Start Checks Operating Your Neuton MowerCut Height Adjusting the Cutting HeightMowing on Slopes Starting the Motor and Engaging the Blade Starting the MowerMowing and Lawn Care Tips When Finished MowingStopping the Motor and Blade Battery Charging and Caring for the BatteryCharging the Battery Charging the Battery in the MowerRecharging after each use of the Mower Charging with the Battery out of the MowerDisconnecting the Charger Storage Temperature Range Recharging to Full Charge for Off-Season StorageCaring for the Battery Recycling your Used BatteryPage Spare Battery Neuton TrimmerStriper Roller Spare Aero Cutting BladeBlade Sharpener Servicing Your Mower Servicing and Storing Your Neuton MowerSupplies Needed Cleaning Your MowerCleaning the Handlebar Removing and Attaching the Blade Tools and Supplies NeededSharpening the Blade Balancing the Blade Storing Your Neuton Mower NEUTON1 638-8661 for assistance Troubleshooting TableTroubleshooting Tips Mower is hard to push Optional MA 3.6 Trimmer and MA 5.6 Striper Roller Trimming on Slopes Safely Using the Neuton TrimmerOperating Your Trimmer Safely Removing the Trimmer Attaching, Removing and Using the TrimmerAttaching the Trimmer Adjusting the Trimmer Head Starting the Trimmer Stopping the TrimmerSafety Tips for using the Trimmer Advancing the CordReplacing the Spool Replacing the Spool HousingMaintaining and Storing the Neuton Trimmer Cleaning the Trimmer Attaching and Using the Striper RollerTool and Supplies Needed Page Description Qty Item # Parts List Neuton CE 6.2 MowerParts Lists, Schematic Diagrams, and Warranty Description Qty Axle, Front 101 Washer, Lock w/Cap 120 Mesh, Bagger Schematic Diagrams Neuton CE 6.2 Mower 080111 Item # Description Qty Parts List Optional MA 3.6 TrimmerSchematic Diagram Optional MA 3.6 Trimmer Page Technical Support Hotline Year Limited WarrantyTerms and Conditions Daily Checklist for your Neuton Mower At 1-866-NEUTON1

CE 6.2 specifications

The Neuton CE 6.2 is a cutting-edge electric lawn mower designed for home gardeners who value efficiency, eco-friendliness, and ease of use. This mower exemplifies modern landscaping technology, combining innovative features with user-friendly design elements to enhance the mowing experience.

One of the standout characteristics of the Neuton CE 6.2 is its impressive power-to-weight ratio. Weighing in at around 40 pounds, this electric mower strikes a balance between portability and performance. The lightweight design allows for effortless maneuverability, particularly in tight spaces and uneven terrains.

Equipped with a powerful 24-volt electric motor, the Neuton CE 6.2 delivers exceptional cutting performance while minimizing noise pollution and emissions. This makes it an excellent choice for eco-conscious users. The mower operates quietly, allowing users to mow at any time without disturbing neighbors or disrupting the peaceful environment of residential areas.

The Neuton CE 6.2 features an adjustable cutting deck, allowing users to customize the grass height settings. With cutting heights ranging from 1 inch to 3.5 inches, garden enthusiasts can achieve their desired lawn aesthetics with ease. The 16-inch cutting width provides ample coverage, enabling users to complete their mowing tasks efficiently while navigating around obstacles smoothly.

One of the most appealing aspects of the Neuton CE 6.2 is its cordless design. Powered by a rechargeable battery, this mower offers the convenience of not being tethered to a power outlet. The battery provides a substantial runtime, allowing users to mow larger lawns without frequent recharging interruptions. Additionally, the battery can be replenished quickly, ensuring that the mower is always ready for action.

The Neuton CE 6.2 also boasts a mulching capability, which allows users to recycle grass clippings back into the lawn. This practice not only nourishes the soil but also reduces the need for extensive bagging, presenting a more environmentally friendly option for yard maintenance.

In conclusion, the Neuton CE 6.2 electric lawn mower is an exceptional tool for modern gardeners seeking efficiency, performance, and sustainability. With its powerful yet quiet motor, adjustable cutting heights, cordless design, and mulching capabilities, it represents a significant step forward in lawn care technology, making it a valuable addition to any home's gardening arsenal.