Neuton CE 6.2 manual ⇒ Status Indicator Light, ⇒ Cutting Height Lever

Page 23

⇒Status Indicator Light

The green Status Indicator Light on the Lower Crossbar (Figure 16) lights up when you install a charged Battery and insert the Safety Key.

NOTE: A green Status Indicator Light does not guarantee that the Battery is fully charged, only that it has some charge, the Safety Key has been inserted, the electrical system is ready, and that the Mower can be started.

Status Indicator Light

Figure 16

IF THE GREEN STATUS INDICATOR LIGHT GOES OUT, DO NOT OPERATE THE MOWER AGAIN UNTIL THE BATTERY IS FULLY CHARGED. IF YOU DO OPERATE THE MOWER WITH THE GREEN STATUS INDICATOR LIGHT OUT, THIS WILL RESULT IN DECREASED CHARGING CAPACITY.

NOTE: Although you may notice that a short period of rest may restore the Status Indicator Light, you still must fully charge the Battery before continuing to mow. For best results, be sure to always fully charge the Battery for eight (8) to twenty-four (24) hours after every use.

⇒Cutting Height Lever

The Cutting Height Lever (Figure 17), located under the Access Cover, allows you to easily adjust how high or low you cut the grass. Notice that there are four (4) different Height Positions.

To easily move the Cutting Height Lever, hold TIP the Handlebar with your right hand to keep the

Mower steady and adjust the Lever with your left hand.

To easily adjust this Lever, push the Lever out of its present notched position and move the Lever up or down to the desired level. When you reach the desired level, simply release the Lever into the notch.

⇒Power/Mode Switch

The Power/Mode Switch (Figure 18) controls the Mower, Power, and optional Trimmer. This Switch has three (3) settings.

•Mower (rear position), used for normal mowing; and

•Power OFF (center position), used to conserve Battery power (green Status Indicator Light goes out); and

•Auxiliary (forward position), used when operating the Optional Trimmer.

Access Cover

Positions

1=1.2" (3.0cm)

2=1.5" (3.8cm) Cutting Height Lever 3=2.0" (5.1cm)

4=2.8" (7.0cm)

Figure 17

Power/Mode Switch

Figure 18

NEUTON CE 6.2 Battery-Powered Mower - Safety & Operating Instructions

19

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Safety & Operating Instructions Battery-Powered MowerToll-Free phone 1-866-NEUTON1 NEUTON→ Power EquipmentThank You Director, Customer RelationsTable of Contents Optional MA 3.6 Trimmer and MA 5.6 Striper Roller Introducing the Neuton Mower CE About this ManualConventions used in this Manual Important Safety Considerations Safety and Information LabelsBattery Operating Tips Label Battery Insertion Label Dressing Appropriately Protecting Yourself and Those around YouPreparing to Use Your Mower or Trimmer Operating Your Mower or Trimmer Safely Handling the Battery Safely NEUTON1 Neuton Mower Package ChecklistSetting Up Your Neuton Mower Safety Key Assembling Your Neuton Mower Read the Safety & Operating Instructions before proceedingCharge the Battery before Your First Use Adjust the Handlebar HeightRemove the Battery Mulching Plug Assembling the Bag to the Bag Frame Rear BaggerRemoving and Emptying the Bagger Installing the BaggerInsert the Battery after Being Fully Charged Your Fully Assembled Neuton Mower ⇒ Analog Voltage Gauge Controls and Features⇒ Safety Key ⇒ Power/Mode Switch⇒ Cutting Height Lever ⇒ Status Indicator LightAnalog Voltage Gauge Neuton CE 6.2 Product Specifications Page Operating Your Neuton Mower Pre-Start ChecksCut Height Adjusting the Cutting HeightMowing on Slopes Starting the Mower Starting the Motor and Engaging the BladeMowing and Lawn Care Tips When Finished MowingStopping the Motor and Blade Charging and Caring for the Battery BatteryCharging the Battery in the Mower Charging the BatteryRecharging after each use of the Mower Charging with the Battery out of the MowerDisconnecting the Charger Recharging to Full Charge for Off-Season Storage Storage Temperature RangeRecycling your Used Battery Caring for the BatteryPage Spare Aero Cutting Blade Spare BatteryNeuton Trimmer Striper RollerBlade Sharpener Servicing and Storing Your Neuton Mower Servicing Your MowerSupplies Needed Cleaning Your MowerCleaning the Handlebar Tools and Supplies Needed Removing and Attaching the BladeSharpening the Blade Balancing the Blade Storing Your Neuton Mower NEUTON1 638-8661 for assistance Troubleshooting TableTroubleshooting Tips Mower is hard to push Optional MA 3.6 Trimmer and MA 5.6 Striper Roller Trimming on Slopes Safely Using the Neuton TrimmerOperating Your Trimmer Safely Removing the Trimmer Attaching, Removing and Using the TrimmerAttaching the Trimmer Adjusting the Trimmer Head Stopping the Trimmer Starting the TrimmerAdvancing the Cord Safety Tips for using the TrimmerReplacing the Spool Replacing the Spool HousingMaintaining and Storing the Neuton Trimmer Attaching and Using the Striper Roller Cleaning the TrimmerTool and Supplies Needed Page Description Qty Item # Parts List Neuton CE 6.2 MowerParts Lists, Schematic Diagrams, and Warranty Description Qty Axle, Front 101 Washer, Lock w/Cap 120 Mesh, Bagger Schematic Diagrams Neuton CE 6.2 Mower 080111 Item # Description Qty Parts List Optional MA 3.6 TrimmerSchematic Diagram Optional MA 3.6 Trimmer Page Technical Support Hotline Year Limited WarrantyTerms and Conditions At 1-866-NEUTON1 Daily Checklist for your Neuton Mower

CE 6.2 specifications

The Neuton CE 6.2 is a cutting-edge electric lawn mower designed for home gardeners who value efficiency, eco-friendliness, and ease of use. This mower exemplifies modern landscaping technology, combining innovative features with user-friendly design elements to enhance the mowing experience.

One of the standout characteristics of the Neuton CE 6.2 is its impressive power-to-weight ratio. Weighing in at around 40 pounds, this electric mower strikes a balance between portability and performance. The lightweight design allows for effortless maneuverability, particularly in tight spaces and uneven terrains.

Equipped with a powerful 24-volt electric motor, the Neuton CE 6.2 delivers exceptional cutting performance while minimizing noise pollution and emissions. This makes it an excellent choice for eco-conscious users. The mower operates quietly, allowing users to mow at any time without disturbing neighbors or disrupting the peaceful environment of residential areas.

The Neuton CE 6.2 features an adjustable cutting deck, allowing users to customize the grass height settings. With cutting heights ranging from 1 inch to 3.5 inches, garden enthusiasts can achieve their desired lawn aesthetics with ease. The 16-inch cutting width provides ample coverage, enabling users to complete their mowing tasks efficiently while navigating around obstacles smoothly.

One of the most appealing aspects of the Neuton CE 6.2 is its cordless design. Powered by a rechargeable battery, this mower offers the convenience of not being tethered to a power outlet. The battery provides a substantial runtime, allowing users to mow larger lawns without frequent recharging interruptions. Additionally, the battery can be replenished quickly, ensuring that the mower is always ready for action.

The Neuton CE 6.2 also boasts a mulching capability, which allows users to recycle grass clippings back into the lawn. This practice not only nourishes the soil but also reduces the need for extensive bagging, presenting a more environmentally friendly option for yard maintenance.

In conclusion, the Neuton CE 6.2 electric lawn mower is an exceptional tool for modern gardeners seeking efficiency, performance, and sustainability. With its powerful yet quiet motor, adjustable cutting heights, cordless design, and mulching capabilities, it represents a significant step forward in lawn care technology, making it a valuable addition to any home's gardening arsenal.
Top Page Image Contents