Neuton CE 6.2 manual Adjusting the Cutting Height, Mowing on Slopes, Cut Height

Page 28

Adjusting the Cutting Height

Using the Cutting Height Lever located under the Access Cover (Figure 20), adjust the Cutting Height so that you cut off only one (1) to two (2) inches of grass at a time.

1.

Open the Access Cover and remove the

 

Safety Key.

2.

Make sure all four (4) Wheels are level.

Access Cover

Push the Lever out of its present

3.

 

notched position and move the Lever

Cutting Height Lever

up or down to the desired level. When

you reach the desired level, simply

 

 

release the Lever into the notch.

TIP

To easily move the Cutting Height

 

Lever, hold the Handlebar with your

 

right hand to keep the Mower steady

 

and adjust the Lever with your left

 

hand.

Figure 20

Each position adjusts the Mower’s Blade level to a different Cutting Height. Pushing the Cutting Height Lever towards Position 1 cuts more grass (which leaves your grass shorter); pushing the Lever towards Position 4 cuts less grass (leaving your grass longer).

The following table lists the final cut grass heights.

Lever Position

Cut Height

 

 

1

1.2" (3.0 cm)

 

 

2

1.5" (3.8 cm)

 

 

3

2.0" (5.1 cm)

 

 

4

2.8" (7.0 cm)

 

 

Mowing on Slopes

Slopes are a major factor related to slip-and-fall accidents, which can result in severe injury. All slopes require caution. If you feel uneasy on a slope, do not mow it.

Always:

•Use caution on slopes. Exercise caution when

Whenever possible, mow across the face of slopes, not up and down. changing direction on slopes.

•Remove objects such as rocks and tree limbs, or any other potential object possibly thrown by the Mower Blade. Objects struck by the Mower Blade can cause severe injuries.

•Watch for holes, ruts, or bumps. Tall grass can hide obstacles.

Never:

•Never mow near drop-offs, ditches, or embankments. You could lose your footing or balance.

•Never mow steep slopes or any other areas where stability or traction is in doubt.

•Never mow on wet grass. Unsure footing could cause you to slip.

24

1-866-NEUTON1 (638-8661) www.neutonpower.com

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Battery-Powered Mower Safety & Operating InstructionsNEUTON→ Power Equipment Thank YouDirector, Customer Relations Toll-Free phone 1-866-NEUTON1Table of Contents Optional MA 3.6 Trimmer and MA 5.6 Striper Roller About this Manual Introducing the Neuton Mower CEConventions used in this Manual Safety and Information Labels Important Safety ConsiderationsBattery Operating Tips Label Battery Insertion Label Protecting Yourself and Those around You Dressing AppropriatelyPreparing to Use Your Mower or Trimmer Operating Your Mower or Trimmer Safely Handling the Battery Safely Setting Up Your Neuton Mower Neuton Mower Package ChecklistNEUTON1 Safety Key Read the Safety & Operating Instructions before proceeding Assembling Your Neuton MowerRemove the Battery Adjust the Handlebar HeightCharge the Battery before Your First Use Mulching Plug Rear Bagger Assembling the Bag to the Bag FrameInstalling the Bagger Removing and Emptying the BaggerInsert the Battery after Being Fully Charged Your Fully Assembled Neuton Mower Controls and Features ⇒ Safety Key⇒ Power/Mode Switch ⇒ Analog Voltage Gauge⇒ Status Indicator Light ⇒ Cutting Height LeverAnalog Voltage Gauge Neuton CE 6.2 Product Specifications Page Pre-Start Checks Operating Your Neuton MowerMowing on Slopes Adjusting the Cutting HeightCut Height Starting the Motor and Engaging the Blade Starting the MowerStopping the Motor and Blade When Finished MowingMowing and Lawn Care Tips Battery Charging and Caring for the BatteryCharging the Battery Charging the Battery in the MowerDisconnecting the Charger Charging with the Battery out of the MowerRecharging after each use of the Mower Storage Temperature Range Recharging to Full Charge for Off-Season StorageCaring for the Battery Recycling your Used BatteryPage Spare Battery Neuton TrimmerStriper Roller Spare Aero Cutting BladeBlade Sharpener Servicing Your Mower Servicing and Storing Your Neuton MowerCleaning the Handlebar Cleaning Your MowerSupplies Needed Removing and Attaching the Blade Tools and Supplies NeededSharpening the Blade Balancing the Blade Storing Your Neuton Mower Troubleshooting Tips Troubleshooting TableNEUTON1 638-8661 for assistance Mower is hard to push Optional MA 3.6 Trimmer and MA 5.6 Striper Roller Operating Your Trimmer Safely Using the Neuton TrimmerTrimming on Slopes Safely Attaching the Trimmer Attaching, Removing and Using the TrimmerRemoving the Trimmer Adjusting the Trimmer Head Starting the Trimmer Stopping the TrimmerSafety Tips for using the Trimmer Advancing the CordMaintaining and Storing the Neuton Trimmer Replacing the Spool HousingReplacing the Spool Cleaning the Trimmer Attaching and Using the Striper RollerTool and Supplies Needed Page Parts Lists, Schematic Diagrams, and Warranty Parts List Neuton CE 6.2 MowerDescription Qty Item # Description Qty Axle, Front 101 Washer, Lock w/Cap 120 Mesh, Bagger Schematic Diagrams Neuton CE 6.2 Mower 080111 Schematic Diagram Optional MA 3.6 Trimmer Parts List Optional MA 3.6 TrimmerItem # Description Qty Page Terms and Conditions Year Limited WarrantyTechnical Support Hotline Daily Checklist for your Neuton Mower At 1-866-NEUTON1

CE 6.2 specifications

The Neuton CE 6.2 is a cutting-edge electric lawn mower designed for home gardeners who value efficiency, eco-friendliness, and ease of use. This mower exemplifies modern landscaping technology, combining innovative features with user-friendly design elements to enhance the mowing experience.

One of the standout characteristics of the Neuton CE 6.2 is its impressive power-to-weight ratio. Weighing in at around 40 pounds, this electric mower strikes a balance between portability and performance. The lightweight design allows for effortless maneuverability, particularly in tight spaces and uneven terrains.

Equipped with a powerful 24-volt electric motor, the Neuton CE 6.2 delivers exceptional cutting performance while minimizing noise pollution and emissions. This makes it an excellent choice for eco-conscious users. The mower operates quietly, allowing users to mow at any time without disturbing neighbors or disrupting the peaceful environment of residential areas.

The Neuton CE 6.2 features an adjustable cutting deck, allowing users to customize the grass height settings. With cutting heights ranging from 1 inch to 3.5 inches, garden enthusiasts can achieve their desired lawn aesthetics with ease. The 16-inch cutting width provides ample coverage, enabling users to complete their mowing tasks efficiently while navigating around obstacles smoothly.

One of the most appealing aspects of the Neuton CE 6.2 is its cordless design. Powered by a rechargeable battery, this mower offers the convenience of not being tethered to a power outlet. The battery provides a substantial runtime, allowing users to mow larger lawns without frequent recharging interruptions. Additionally, the battery can be replenished quickly, ensuring that the mower is always ready for action.

The Neuton CE 6.2 also boasts a mulching capability, which allows users to recycle grass clippings back into the lawn. This practice not only nourishes the soil but also reduces the need for extensive bagging, presenting a more environmentally friendly option for yard maintenance.

In conclusion, the Neuton CE 6.2 electric lawn mower is an exceptional tool for modern gardeners seeking efficiency, performance, and sustainability. With its powerful yet quiet motor, adjustable cutting heights, cordless design, and mulching capabilities, it represents a significant step forward in lawn care technology, making it a valuable addition to any home's gardening arsenal.
Top Page Image Contents