McIntosh MVP871 owner manual Rear Panel Connections, Data

Rear Panel Connections

OPTICAL DIGITAL AUDIO OUTPUT sends signals to a Con- trol Center with a D/A Converter or a decoder

HDMI OUT supplies digital video and digi- tal audio signals to an Input of an A/V Con- trol Center or other au- dio/video component

Y OUTPUT connects to the Y Component Input of
the TV/Monitor or other video component.
P	B	/C	B	OUTPUT connects to the P /C	B		Component
				B
Input of the TV/Monitor or other video component.
P	/C			OUTPUT connects to the P /C		R		Component
	R		R	R
Input of the TV/Monitor or other video component

COAXIAL DIGI- TAL AUDIO OUT- PUT sends signals to a Control Center with a D/A Con- verter or a decoder

S-VIDEO OUTPUT supplies video signals to a S Input of an A/V Control Center or oth- er video component

Connect the MVP871 power cord to a live AC outlet. Refer to informa- tion on the back panel of your MVP871 to deter- mine the correct voltage for your unit

UNBALANCED AUDIO OUT- PUT supplies Two Channels of Ana- log Audio and con- nects to the Analog Input of an A/V Control Center

UNBALANCED AUDIO OUTPUTS supply Six Channels of analog audio and connects to the Exter- nal Input of an A/V Control Center

VIDEO OUTput sup- plies video signals to connect to a Com- posite Input of an A/V Control Center or other video com- ponent

BALANCED AUDIO OUTPUTS supply two channels of analog audio to connect to Balanced Inputs of other com- ponents

RS-232C	DATA IN
connector for	receives op-
connection	erating data
to a remote	from a McIn-
control device	tosh Control
	Center

IR INput for	POWER CONTROL IN
connecting an	receives turn-on signals
IR Receiver	from a McIntosh compo-
	nent and POWER CON-
	TROL OUT sends turn-on
	signals on to another
	McIntosh Component

10