McIntosh MVP871 owner manual Video Setup, con’t, Audio/Video Sync, Dio/Video, Squeeze Mode

Figure 24

Figure 32

Video Setup, con’t

4.Return to the Video Setup Menu by pressing the Left followed by the Up directional Push-buttons.

5.Next continue to the AUDIO/VIDEO SYNC Settings. If no other changes are to be made in Setup Mode at this time, exit by pressing the RTRN (Return) Push- button.

Note: The SETUP Push-button may also be pressed to exit the setup mode.

Audio/Video Sync

Due to the difference in the amount of time it takes for the processing of the Video and Audio signals, they can be out of synchronization which is especially noticeable with dialog. The MVP871 allows for the correction of any loss of sync. There are separate settings for HDMI (Digital Video), Analog Video (both Interlaced and Progressive Scan modes) and OTHER which is a variable setting with an offset delay 0-200ms. The variable delay is useful when multiple video connections such as Interlaced, Progressive and Digital are all used simultaneously. The default setting is Analog Progressive Scan Video. To change from the default setting perform the following steps:

1.Press the SETUP Push-button on the supplied Remote Control to access the Language Setup Menu. Then

press the Right directional Push-button to select the Video Menu

Icon Tab. Refer to figure 24.

Note: If there is a Disc playing in the MVP871 press

the

STOP

Push-

button twice before pressing the SETUP Push-but- ton.

2.Use the Down directional Push-button on the Re- mote Control to

select the AU-
DIO/VIDEO
SYNC Menu.
Refer to figure
31.
3. To change from
the default
setting use the
Right direc-
tional Push-but-	Figure 31
ton followed by

Up or Down directional Push-buttons to select one of two other presets (Interlaced or HDMI) followed by pressing the SELECT Push-button. If a different delay value is needed, use the Up or Down directional Push-buttons to

select OTHER followed by

the SELECT

Push-button.

Use the Up or Down direc- tional Push-but- tons to enter the offset delay value followed

by the SELECT Push-button. Refer to figure 32.

Note: The title of the icon button-bar will change color from yellow (the cursor color) to blue indicating the selected item.

4.Return to the Video Setup Menu by pressing the Left followed by the Up directional Push-buttons.

5.Next continue to the SQUEEZE MODE Settings. If no other changes are to be made in Setup Mode at this time, exit by pressing the RTRN (Return) Push-button.

Note: The SETUP Push-button may also be pressed to exit the setup mode.

Squeeze Mode

When the MVP871 is connected to a TV/Monitor with ei- ther a Component Video or HDMI connection and the TV Aspect Ratio is set to 16:9 and a video source with an As- pect Radio of 4:3 is displayed, the image will be stretched out. The Squeeze Mode will compensate by displaying the 4:3 image in the center of the screen. The default setting is Off with additional choices of On or Auto. To change from the default setting perform the following steps:

1.Press the SETUP Push-button on the supplied Remote Control to access the Language Setup Menu. Then press the Right directional Push-button to select the Video Menu Icon Tab. Refer to figure 24.

Note: If there is a Disc playing in the MVP871 press the STOP Push-button twice before pressing the SETUP Push-button.

2.Use the Down directional Push-button on the Re- mote Control to select the SQUEEZE MODE Menu. Refer to figure 33

3.To change from the default setting use the Right directional Push-button followed by Up or Down directional Push-buttons and then press the SELECT Push-button.

28