How to Set the Audio, con’t
2. Use the Down directional
select SOURCE DIRECT. Refer
to figure 51. 3. Use the Right
directional
the Up or
Down direc- tional
tons to select
either the 50kHz or 100kHz setting. Then press the SELECT
4.Next continue to the BASS ENHANCER Setup Menu item. If no other changes are to be made in Setup Mode at this time, exit by pressing the RTRN (Return)
Note: The SETUP
Bass Enhancer
The MVP871 Bass Enhancer redirects low frequency sounds to the Subwoofer when a two channel audio source or other source without Low Frequency Effects (LFE) is playing. The Subwoofer needs to be active, refer to Loud- speaker Configuration on page 30. The defaut setting for Bass Enhancer is Off, to activate the Bass Enhancer Direct feature perform the following:
1.Press the SETUP
to access the
Note: If there is a Disc
playing in the MVP871, press the STOP
2.Use the Down directional
3.Use the Right directional
4.Next continue to the COMPRESSION Setup Menu item. If no other changes are to be made in Setup Mode at this time, exit by pressing the RTRN (Return)
Note: The SETUP
Compression
Watching a movie with a wide dynamic range late at night could disturb others not viewing the movie. The MVP871 Compression feature reduces the dynamic range, allowing enjoyment of the movie without disturbing others. Select the Dolby Digital Sound Track (DVD Disc Menus) and to activate the Compression feature perform the following:
1.Press the SETUP
Note: If there is a Disc playing in the MVP871, press the STOP
2.Use the Down directional
3.Use the Right
directional
4.Next continue to the RATINGS Setup Menu item. If no other changes are to be made in Setup Mode at this time, exit by pressing the RTRN (Return)
Note: The SETUP
34