McIntosh MVP871 owner manual SETUP, con’t How to Set the Ratings, Rating Level, Password

SETUP, con’t

How to Set the Ratings

Rating Level

Some DVD Movie discs have encoded rating levels that al- low setting the MVP871 to prevent children from viewing inappropriate movies in your absence. A password protect- ed lock function, set by you, determines the rating limit for disc playback. In the example below the default setting of No Limit Rating Level will be changed to Level 3.

Note: A Rating Level of 8 allows viewing of all DVD Movies and a Level of 1 plays movies suitable for children. It is advisable to write down the password for future refer- ence, as once a password has been entered it will stay in effect until removed or changed.

1.Press the SETUP Push-button on the supplied Remote Control to access the Language Setup Menu. Then press the Right directional Push-button to select the

Ratings Menu Icon Tab. Refer to figures 54 and 55.

Note: If there is a Disc playing in the MVP871 press the

STOP

Push- button twice

before	Figure 54
press-
ing the
SETUP
Push-
button.

2.Use the Down direc- tional Push-

button on the
Remote Con-
trol to select	Figure 55
the RATING
LEVEL Menu.
Refer to figure
56.
3. Select the
desired rating
level of 3 by
using the Up
or Down
directional
Push-buttons	Figure 56
followed by the
SELECT Push-button.

3.Using the NUMERIC Push-buttons on the Remote Control, enter the default password “0000” followed by SELECT Pushbutton. Refer to figure 57.

4.Return to the

Rating Menu
by pressing the
Up direction-
al Push-button.
6. Next continue
to the PASS-
WORD Set-
tings. If no
other changes
are to be made	Figure 57
in Setup Mode

at this time, exit by pressing the RTRN (Return) Push- button.

Note: The SETUP Push-button may be also pressed to exit the setup mode.

Password

The Password of 0000 used in the previous Rating Level example or any other previously entered password may be changed at any time. To change the current password perform the following steps:

1.Press the SETUP Push-button on the supplied Remote Control to access the Language Setup Menu. Then press the Right directional Push-button to select the Ratings Menu Icon Tab. Refer to figure 55.

Note: If there is a Disc playing in the MVP871 press the STOP Push-button twice before pressing the SETUP Push-button.

2.Use the Down directional Push-button on the Re- mote Control to select the PASSWORD Menu. Refer to

figure 58.
3. Use the Right
directional
Push-button
followed by the
SELECT Push-
button. Then
enter using the
Numeric Push-
buttons on the
Remote Control	Figure 58
the current

password “0000”, followed by the SELECT Push-but- ton. Refer to figure 59 on the next page.

35