SETUP, con’t
6.When all the Loudspeaker distances are entered, press the RTRN (Return)
7.Next continue to the DIGIT OUTPUT Settings. If no other changes are to be made in Setup Mode at this
time, exit by pressing the RTRN (Return)
Note: The SETUP
Digital Output
The defaut setting for the Coaxial and Optical Digital Au- dio Outputs is to pass through the selected Dolby Digital or DTS Digital Bitstream Signals for external decoding.
The optional setting is for sending out a two channel PCM Digital Signal.
1.Press the SETUP
Note: If there is a Disc playing in the MVP871, press the STOP
2.Use the Down directional
rectional Push- button on the
Remote Control
to select DIGI-
TAL OUTPUT. Refer to figure 49.
3. Use the Right
directional
followed by
the Up or Down directional
4.Next continue to the DOWN SAMPLING Setup Menu item. If no other changes are to be made in Setup Mode at this time, exit by pressing the RTRN (Return)
Note: The SETUP
Down Sampling
The defaut setting for Down Sampling is Off. When a
1.Press the SETUP
Note: If there is a Disc playing in the MVP871, press the STOP
2.Use the Down directional
directional
on the Remote
Control to select DOWN
SAMPLING. Refer to figure
50.
3. Use the Right directional
followed by the Up or Down directional
4.Next continue to the SOURCE DIRECT Setup Menu item. If no other changes are to be made in Setup Mode at this time, exit by pressing the RTRN (Return)
Note: The SETUP
Source Direct
The MVP871 Source Direct Feature, when active, repro- duces the full range of sound when playing SACD and DTS Music Discs. The defaut setting for Source Direct is Off. When actived, the Loudspeaker Configuation Settings previously made are overriden. The Front and Surround Loudspeakers are configured as Large with the Subwoofer set to On. The High Frequency response is extended to 50kHz or 100kHz depending on the choice made. To acti- vate the Source Direct feature perform the following:
Note: If the Front and Surround Loudspeakers in your system are considered small (refer to additional infor- mation on page 30, Loudspeaker Size Configuration) do not activate Source Direct as distortion and/or damage could occur.
1.Press the SETUP
Note: If there is a Disc playing in the MVP871, press the STOP
33