MTD 19A30002000, OEM-190-180A manual Identify The Model of Tractor

Model Plate

1	30
3	81
11	63
6	47
C3	-00-
LLX	20
OB	28
D.	-00-
TO.	30
MP	38

Figure 1-1

Sample Model Number

1 3 A M 7 9 0 G 0 0 0

Indicates Model Series 700

Figure 1-2

Identify The Model of Tractor

This manual is designed for installation of this new bagging unit on several different models of tractors. It is important for you to determine which model of tractor that you have. Once this is known, follow the pertinent set of instructions on the following pages.

Note: Read and observe all WARNING, NOTES and IMPORTANT statements. They are included to provide for the protection of the equipment installer and user, and to ensure the prolonged service life of the equipment.

Note: References to LEFT and RIGHT indicate the left and right sides of the tractor when facing forward in the operator’s position. Reference to the FRONT indicates the grille end; to the REAR, the rear end of the rider.

To determine which model of rider you have, you will need to locate the rider’s model plate, located under the seat. Simply flip the seat up and locate the model plate, which will consist of an 11 digit/letter model number and a serial number. See Fig. 1-1. For ease in this installation and for future use, copy your rider’s model number & serial number below now:

Rider Model Number:__ __ __ __ ____ __ __ __ __ __

Rider Serial Number:_________________________

The 5th, 6th & 7th numbers from the left in your model number determine your rider’s model series. See Fig. 1-2.

When you fill in your model number in the space above, the actual model series number should fall into the gray shaded area.

Now that you have determined what model rider you are attaching this grass bag collection system to, follow the instructions on the following pages according to your model of rider.

Section 1 — To The Owner

3