
To programme a preset
●Press [ (Previous) or ] (Next) until the preset you want to programme is displayed, or type the preset number (remote only).
●Tune the station by pressing A (Up) or V (Down); see Tuning manually, page 10.
●If the station is marginal, and you want it to be preset to Mono, press Mono.
●Press Store.
To choose the station at switch-on
●Select the preset you want to choose.
●Press Store.
Stored
The display will show:
This station will now be selected when the tuner is turned on.
The display will show:
Stored
The preset is now programmed to the station you tuned.
Using the FM tuner
13