Meridian America 504 manual Setting up the FM tuner, To set up the FM tuner options

Page 19

Setting up the FM tuner

For many users the only change they will want to make to the

The following table shows the options you can set up.

 

standard operation of the 504 Stereo FM Tuner is to define the

 

 

 

preset stations.

Option

Initial value

 

 

 

 

 

However, the 504 Stereo FM Tuner contains several

Maximum number of

 

 

Max?

3O

presets (1 to 30).

customisable features that you can programme to suit your

 

 

 

 

 

requirements.

Tuning method

Seektune

 

 

(Seektune or Steptune).

To set up the FM tuner options

Turn off the FM tuner, using the power switch on the back panel.

Turn on the power again while holding down the Mono key on the front panel.

Stop= 4

Stop strength (1 to 8).

Meter? Y

Tuning meter (Y or N).

The display will show:

It will then show the first setup option:

Setup

Max? 3O

For more information about the tuning method and stop strength see Tuning manually, page 10.

For more information about the tuning meter see To use the tuning meter, opposite.

Using the

Press Mono to move between the options.

Press A (Up) or V (Down) to change the value of the current option.

FM tuner

15

Image 19
Contents Meridian 504 Stereo FM Tuner Preface Contents Preface Introduction Meridian 500 Series Professional featuresSeries communications 506 20-Bit CD Player Compact Disc Transport Sample configurations566 20-Bit Digital to Analogue Analogue Controller Converter 562V Multimedia Controller Specification Specification and accessoriesAvailable accessories Using the FM tuner Front panel Selecting a station To switch on from standbyTo switch to standby To select a preset stationTo search for a station Tuning manuallyTo switch to mono To switch to stereoSelecting stereo or mono Defining preset stations To choose the station at switch-on To programme a presetChoosing the display To use the tuning meterTo change the display To set up the FM tuner options Setting up the FM tunerTo alter a preset label To set up the preset labelsSetting up the FM tuner Radio interference UnpackingTo position the FM tuner Back panel Connecting the FM tunerTo connect an antenna To connect to other Meridian 500 Series equipment To connect to a conventional preamplifierTo connect to Meridian 600 or 200 Series equipment To connect to a 501 Control Unit Reception is poor TroubleshootingThere is a hum using the analogue output No standby display is shownSetting up the FM tuner To clean the audio connections MaintenanceCleaning To clean the case, display panel, and keypadService Service and guaranteeGuarantee Index IndexStations