Meridian America 504 manual To connect to a conventional preamplifier

Page 24

Setting up the FM tuner

To connect to a conventional preamplifier

●Connect the sockets marked OUTPUT L and R on the back panel of the FM tuner to an appropriate input on your preamplifier.

You should consult the manufacturer’s manual to determine which input to use, but it will generally be labelled TUNER, RADIO, or AUX.

You should either use a twin-screened audio cable, or a pair of single-screened audio cables. These cables can have a considerable effect on the quality of the sound, and you are advised to seek your dealer’s advice on the best type of cables for your system.

To connect to other Meridian 500 Series equipment

●Connect one of the COMMS sockets on the back panel of the FM tuner to one of the COMMS socket on another 500 Series unit, using the 500 comms lead provided.

The sequence in which you connect the units is not important.

COMMS

COMMS

Then configure the units with the following automatic setup procedure:

●Switch all the units to standby.

●Press Clear on the remote.

Auto

Each unit will display:

One unit will then be designated as

the controller, and display:

Con.

20

Image 24

Contents Meridian 504 Stereo FM Tuner Preface Contents Preface Introduction Professional features Meridian 500 SeriesSeries communications Sample configurations 506 20-Bit CD Player Compact Disc Transport566 20-Bit Digital to Analogue Analogue Controller Converter 562V Multimedia Controller Specification and accessories SpecificationAvailable accessories Using the FM tuner Front panel To switch on from standby To switch to standbyTo select a preset station Selecting a stationTuning manually To search for a stationTo switch to stereo To switch to monoSelecting stereo or mono Defining preset stations To programme a preset To choose the station at switch-onTo use the tuning meter Choosing the displayTo change the display Setting up the FM tuner To set up the FM tuner optionsTo set up the preset labels To alter a preset labelSetting up the FM tuner Unpacking Radio interferenceTo position the FM tuner Connecting the FM tuner Back panelTo connect an antenna To connect to a conventional preamplifier To connect to other Meridian 500 Series equipmentTo connect to Meridian 600 or 200 Series equipment To connect to a 501 Control Unit Troubleshooting There is a hum using the analogue outputNo standby display is shown Reception is poorSetting up the FM tuner Maintenance CleaningTo clean the case, display panel, and keypad To clean the audio connectionsService and guarantee ServiceGuarantee Index IndexStations