Multiquip ga6HEB Operation/shutdown, Stopping the Engine Normal Shutdown, Emergency Shutdown

operation/shutdown

12.Read voltmeter on front panel of generator (Figure 22) and verify that 240 VAC is displayed. Using an external voltmeter as shown in Figure 22, verify that 240 VAC is present at the 120/240V, L14-30R twist-lock receptacle.

	120VAC		240VAC
L14-30R	X		X
		L14-30R
120VAC W	G	W	G
120VAC
	Y		Y

240 VAC

OFF V~

2. Place idle control switch (Figure 24) in the OFF position.

	GA-6HEB
ON
OFF	OFF
GA-6HB

Figure 24. Idle Control switch (OFF)

3.Let engine run at idle with no load for 2-3 minutes.

4.To shut-down the engine, place the generator's operation switch (Figure 25) in the OFF position).

V 240

V

300 mV

A A~

V

COM

Figure 25. Operation Switch (OFF)

Figure 22. 120/240V L14-30R Receptacle

NOTICE

When using a combination of dual receptacles, total load should not exceed the rated capacity of the generator.

13.Connecting of loads (power tools, lighting etc.) to the generator receptacles can now be done.

Stopping the Engine (Normal Shutdown)

1.Place main circuit breaker (Figure 23) in the OFF position.

ON

OFF

Figure 23. Main Circuit Breaker (OFF)

5.Place engine fuel valve lever (Figure 26) in the OFF position.

Figure 26. Engine Fuel Valve Lever (OFF)

6.Remove all loads from the generator.

Emergency Shutdown

1. Place operation switch (Figure 25) in the OFF position

page 24 — GA6HB/GA6HEB 60 hz gENERATOR• operation and parts manual — rev. #0 (03/13/14)