Battery ga6HEB, Battery Cable Installation

maintenance

battery (ga6HEB)

This unit is of negative ground DO NOT connect in reverse. Always maintain battery fluid level between the specified marks. Battery life will be shortened, if the fluid levels are not properly maintained. Add only distilled water when replenishment is necessary.

Check to see whether the battery cables are loose. Poor contact may result in poor starting or malfunctions. Always keep the terminals firmly tightened. Coating the terminals with an approved battery terminal treatment compound will help prevent corrosion. Replace battery with only recommended type battery.

The battery is sufficiently charged if the specific gravity of the battery fluid is 1.28 (at 68° F). If the specific gravity should fall to 1.245 or lower, it indicates that the battery is dead and needs to be recharged or replaced.

Before charging the battery with an external electric source, be sure to disconnect the battery cables.

Battery Cable Installation

NOTICE

Inadequate battery cable connections may cause poor starting of the generator, and create other malfunctions..

ALWAYS be sure the battery cables are properly connected to the battery terminals (Figure 30). The red cable is connected to the positive terminal of the battery, and the black cable is connected to the negative terminal of the battery.

NEGATIVE

POSITIVE

Figure 34. Battery Connections

NOTICE

ALWAYS disconnect the negative terminal first and reconnect negative terminal last.

When connecting battery do the following:

1.NEVER use worn or damaged battery cables. Replace defective battery cables immediately.

2.Place a small amount of battery terminal treatment compound around both battery terminals. This will ensure a good connection and will help prevent corrosion around the battery terminals.

NOTICE

If the battery cables are connected incorrectly, electrical damage to the generator will occur. Pay close attention to the polarity markings on the battery when connecting the battery cables.

Polarity

The polarity of the battery is extremely important. When an inverted circuit connection takes place, the circuit will be in short circuit instantaneously resulting in possible damage to the control box electronics and starter.

When connecting the battery cables to the battery terminals be sure to check the polarity.

testing the GFCI Module

If tripping of the main circuit breaker persists after a load is replaced with a known good one (no short circuit), perform this test with no load.

1.Start the generator as outlined in the start up procedure in this manual.

2.Place the main circuit breaker (Figure 35) in the ON

position.

OFF

Figure 35. Circuit Breaker ON (GFCI Test)

GA6HB/6HEB 60 hz GENERATOR • operation and parts manual — rev. #0 (03/13/14) — page 29

ga6HB, ga6HEB specifications

Multiquip has established itself as a leading manufacturer of innovative and reliable construction equipment. Among its impressive lineup, the GA6HEB and GA6HB generators stand out due to their advanced features and exceptional performance. Both models cater to a variety of applications, making them suitable for construction sites, events, and emergency power needs.

The GA6HEB generator is equipped with a powerful 6 kW output capability, which makes it ideal for powering tools and equipment in demanding environments. For those looking for a more efficient alternative, the GA6HB offers similar power with a focus on convenience and ease of use. Both units utilize a highly efficient engine, ensuring that fuel consumption is minimized while still delivering reliable power when needed.

One of the defining features of the GA6HEB and GA6HB is their innovative design. Constructed with high-quality materials, these generators are built to withstand the rigors of daily use. Their robust frames provide enhanced durability, ensuring longevity in harsh job site conditions. Additionally, the compact design of both models allows for easy transport and storage, making them a practical choice for contractors and event planners alike.

In terms of technology, these generators include advanced control systems that enhance usability. The user-friendly interface provides operators with vital information at a glance, including voltage output, hour meters, and maintenance reminders. This focus on intuitive operation ensures that even those with minimal experience can efficiently manage these units.

Noise reduction technology is another significant characteristic of the GA6HEB and GA6HB. These generators are designed to operate quietly, allowing for use in noise-sensitive environments without disturbing nearby activities. This feature is particularly beneficial for outdoor events and residential applications, where peace and tranquility are paramount.

Fuel efficiency and runtime are critical for users, and both models deliver impressive performance in this regard. With extended run times on a single tank of fuel, the GA6HEB and GA6HB are perfect for long-term projects where consistent power is needed without frequent refueling.

Overall, the Multiquip GA6HEB and GA6HB generators are exemplary choices for various power needs. Their combination of robust construction, advanced technology, and user-friendly design makes them valuable assets for any project requiring reliable and efficient power solutions. Whether for professional contractors or casual users, these models promise the performance and dependability that Multiquip is renowned for.