Kohler K-1369, K-1375, K-1461 Confirm Proper Operation, Operating Sequence, Models without Neckjets

Page 13

Heater

Heater Indicator Light

Activates Mode

Selected

On/Off

Increases Flow

 

 

 

 

Flow Mode

 

Indicator Bar - Shows

 

water flow volume

 

Increases Flow

Neckjet Mode -

Adjust Pulse

Decreases Flow

Turn the jet trim clockwise to decrease the flow.

Power

Decreases Flow

 

On/Off

Power On/Off

 

 

 

Heater On/Off

Lighted User Keypad

Lighted User Keypad

(for whirlpools without neckjets)

(for whirlpools with neckjets)

Turn the jet trim counterclockwise to increase the flow.

16. Confirm Proper Operation

Fill the Whirlpool

NOTE: Please read these steps carefully before you operate your whirlpool.

Position the jet nozzles so they face down toward the basin. Turn the jet trim rings fully counterclockwise.

Fill the whirlpool to a water level at least 2(5.1 cm) above the top of the highest jet.

NOTE: The water temperature in the whirlpool should not exceed 104°F (40°C). The heater will automatically turn off as the water temperature approaches 104°F (40°C) and will remain off until the water cools.

17. Operating Sequence

Models without Neckjets

NOTE: A built-in heater automatically helps to maintain the water temperature when the whirlpool is running, as long as the water temperature does not exceed 104°F (40°C). The heater will disengage at higher temperatures.

IMPORTANT! Please refer to your Homeowners Guide for detailed instructions on the user keypad and optional remote control.

Press the Power On/Off button to turn on the whirlpool. The whirlpool will start at medium flow.

Increase or decrease the water flow by pressing either the up or down arrow buttons on the keypad. An indicator bar in the center of the keypad shows the water flow volume.

Adjust each jet for optimum air/water mixture. Turn the jet trim clockwise to reduce the air flow, and counterclockwise to increase the air flow.

Press the heater button to turn the heater off and back on. When illuminated, the indicator light shows that the water temperature will be maintained up to 104°F (40°C).

Press the Power On/Off button a second time to turn the whirlpool off.

NOTE: A built-in timer automatically stops the pump and motor after approximately 20 minutes of operation.

Models with Neckjets

NOTE: A built-in heater automatically helps to maintain the water temperature when the whirlpool is running, as long as the water temperature does not exceed 104°F (40°C). The heater will disengage at higher temperatures.

Kohler Co.

13

1019749-2-H

Image 13
Contents Installation Guide Connections and Service Access Product Notices FeaturesProduct Information Electrical RequirementsTools and Materials Table of ContentsBefore You Begin Concrete Construction Prepare the SiteWood Construction Prepare the WhirlpoolOption for Using Construction Adhesive Option for Using a Cement or Mortar BedOption for Using Silicone Sealant Secure the Whirlpool to the SubfloorInstall the Optional Pillow For Models Without Neckjets Install the PlumbingCut the Pump Banding Straps Make Electrical Connections Typical Wiring Connection for North AmericaInstall the Neckjet Pillow ″-N1″Series Only Install the Whirlpool Trim KitTest Run the Whirlpool Test Run the Whirlpool Complete the Concrete Installation Install the Optional ApronClean-Up After Installation Complete the Finished Wall/DeckOperating Sequence Confirm Proper OperationModels without Neckjets Models with NeckjetsOperating Sequence Troubleshooting ProceduresSymptoms Probable Causes Recommended Action Troubleshooting ProceduresTroubleshooting Procedures Branchements électriques requis Information sur le produitCaractéristiques SommaireConnexions et accès pour l’entretien Information sur le produitOutils et matériels Avant de commencerConstruction en béton Préparer le siteConstruction en bois Préparer la baignoire à hydromassageOption pour l’utilisation de ciment ou de mortier Sécuriser la baignoire à hydromassage au plancherOption pour l’utilisation d’un adhésif de construction Option d’utilisation d’un joint en siliconeSectionner les sangles de retenue de la pompe Installer la plomberie1019749-2-H Français-8 Kohler Co Du boÎtier de jonction Faire les connexions électriques Tester la baignoire à hydromassage Installer le kit de garniture de la baignoire à hydromassageTester la baignoire à hydromassage Compléter l’installation en béton Installer le bandeau optionnelNettoyage après installation Compléter le mur/comptoir fini1019749-2-H Français-14 Kohler Co Nettoyage après installation17. Séquence d’opération Confirmer le bon fonctionnementModèles sans jets pour le cou Modèles avec jets pour le couSéquence d’opération Procédures de dépannageProcédures de dépannage Symptômes Causes probables Action recommandée1019749-2-H Français-18 Kohler Co Kohler Co Français-19 1019749-2-H Requisitos eléctricos Información sobre el productoAvisos sobre el producto Características ContenidoAcceso para las conexiones y el mantenimiento Información sobre el productoHerramientas y materiales Antes de comenzarMás Construcción de concreto Prepare el sitioConstrucción de madera Prepare la bañera de hidromasajeOpción que utiliza una lechada de cemento o mortero Fije la bañera de hidromasaje al subpisoOpción que utiliza adhesivo de construcción Opción que utiliza sellador de siliconaInstale la plomería Corte las cintas metálicas que sujetan la bombaInstale la almohada opcional Modelos sin jets para el cuello Conexión de cableado típica para Norteamérica Realice las conexiones eléctricasRealice las conexiones eléctricas Instale la almohada del jet para el cuello sólo Serie ″-N1″ Instale el kit de guarnición de la bañera de hidromasajePruebe el funcionamiento de la bañera de hidromasaje Pruebe el funcionamiento de la bañera de hidromasaje Termine la cubierta/pared acabada Instale el faldón opcionalTermine la instalación de concreto Limpieza después de la instalaciónSecuencia de funcionamiento Confirme el funcionamiento correctoSecuencia de funcionamiento Procedimientos para resolver problemasSíntomas Causas probables Acción recomendada Procedimientos para resolver problemas1019749-2-H Español-17 Kohler Co Kohler Co Español-18 1019749-2-H 1019749-2-H 1019749-2-H Kohler Co
Related manuals
Manual 48 pages 30.08 Kb Manual 36 pages 60.55 Kb

K-1369, K-1110, K-1158, K-1014, K-1487 specifications

Kohler is renowned for its commitment to excellence and innovation in kitchen and bathroom fixtures. Among its impressive product lineup are several standout faucet models: the Kohler K-13468, K-1375, K-13469, K-13453, and K-13462. Each of these faucets is designed to elevate the functionality and aesthetic appeal of any space, combining modern design with cutting-edge technology.

The Kohler K-13468 is a sleek and sophisticated kitchen faucet that boasts a pull-down spray head for versatile usage. Its high-arc spout design offers ample clearance for larger pots and pans, making it an indispensable tool for any busy home chef. The K-13468 features Kohler's patented Reflex technology, which ensures smooth operation and secure docking of the spray head after use.

The K-1375 is an elegant bathroom faucet that merges form with function. It uses a single-handle operation, allowing precise control over water temperature and flow. The K-1375 is equipped with Kohler's ceramic disc valves that offer exceptional durability and prevent leaks, ensuring long-lasting performance. Its modern aesthetic can complement various bathroom styles, making it a versatile choice for many homeowners.

Another remarkable offering is the Kohler K-13469. This model is particularly distinguished by its high-performance water efficiency, meeting EPA WaterSense criteria. Its powerful spray options provide a satisfying experience without sacrificing water use, showcasing Kohler's commitment to sustainability. The K-13469 also features an integrated pull-down spray head, allowing users to transition easily between tasks.

The K-13453 is a testament to Kohler's innovative design philosophy. This faucet features a unique two-handle setup that allows for easy adjustments to water temperature and flow rate. Its sleek lines and polished finish make it a stylish addition to any sink, while its robust construction ensures it can withstand everyday use.

Finally, the Kohler K-13462 is a contemporary faucet that offers a versatile and stylish option for kitchens. With a minimalist spout design that balances elegance and practicality, it also incorporates the convenience of a pull-down sprayer. The K-13462 leverages Kohler’s advanced spray technology to provide multiple spray functions, making it suitable for everything from rinsing fruits to filling large containers.

In summary, the Kohler K-13468, K-1375, K-13469, K-13453, and K-13462 are exemplary products that embody Kohler's dedication to quality, innovation, and environmental responsibility. Each faucet combines stylish design with user-friendly features, making them sought-after choices for those looking to enhance their kitchen and bathroom spaces.