Kohler K-1433, K-1375 manual Product Information, Electrical Requirements, Product Notices Features

Page 2

Important Information

WARNING: When using electrical products, basic precautions should always be followed, including the following:

DANGER: Risk of electric shock. Connect only to circuits protected by a Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage Circuit-Breaker (ELCB).

Building materials and wiring should be routed away from the pump body and other heat-producing components of the unit.

Install to permit access for servicing.

A pressure wire connector marked ″Earth/Ground″ is provided within the wiring compartment. To reduce the risk of electric shock, connect this connector to the grounding terminal of your electric service or supply panel with copper wire equivalent in size to the circuit conductor supplying this equipment.

Pressure wire connectors are provided on the exterior of the junction box or control within this unit to permit connection of a bonding conductor between this unit and all other exposed metal in the vicinity, as needed to comply with local requirements.

Grounding is required. The unit should be installed by a qualified service representative, and grounded.

WARNING: Risk of electric shock. A licensed electrician should make all electrical connections.

WARNING: Risk of electric shock. Disconnect power before servicing.

WARNING: Risk of injury or property damage. Please read all instructions thoroughly before beginning installation, including the following requirements.

NOTICE: Follow all local plumbing and electrical codes.

Product Information

Electrical Requirements

The installation must have a Class A Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage Circuit-Breaker (ELCB). The GFCI or ELCB protect against line-to-ground shock hazard. Use a 208 - 240 V, 20

A, 50/60 Hz dedicated service for the whirlpool.

Product Notices

WARNING: Unauthorized modification may cause unsafe operation and poor performance of the whirlpool. Do not relocate the whirlpool pump, or make other modifications to the whirlpool system, as this could adversely affect the performance and safe operation of the whirlpool. Kohler Co. shall not be liable under its warranty or otherwise for personal injury or damage caused by any such unauthorized modification.

Features

-N1 Series: Components include a pump, heater, control, shut-off valve, neckjets, pulse cannister, and illuminated switch (user keypad).

-H2 Series: Components include a pump, heater, control and illuminated switch (user keypad).

The whirlpool pump and piping are factory-assembled.

Connections and Service Access

Before installation, ensure proper access to the final connections.

1019749-2-H

2

Kohler Co.

Image 2
Contents Installation Guide Product Information Product Notices FeaturesConnections and Service Access Electrical RequirementsTable of Contents Tools and MaterialsBefore You Begin Prepare the Site Concrete ConstructionPrepare the Whirlpool Wood ConstructionOption for Using Silicone Sealant Option for Using a Cement or Mortar BedOption for Using Construction Adhesive Secure the Whirlpool to the SubfloorCut the Pump Banding Straps Install the PlumbingInstall the Optional Pillow For Models Without Neckjets Typical Wiring Connection for North America Make Electrical ConnectionsTest Run the Whirlpool Install the Whirlpool Trim KitInstall the Neckjet Pillow ″-N1″Series Only Test Run the Whirlpool Clean-Up After Installation Install the Optional ApronComplete the Concrete Installation Complete the Finished Wall/DeckModels without Neckjets Confirm Proper OperationOperating Sequence Models with NeckjetsTroubleshooting Procedures Operating SequenceTroubleshooting Procedures Symptoms Probable Causes Recommended ActionTroubleshooting Procedures Information sur le produit Branchements électriques requisConnexions et accès pour l’entretien SommaireCaractéristiques Information sur le produitAvant de commencer Outils et matérielsPréparer le site Construction en bétonPréparer la baignoire à hydromassage Construction en boisOption pour l’utilisation d’un adhésif de construction Sécuriser la baignoire à hydromassage au plancherOption pour l’utilisation de ciment ou de mortier Option d’utilisation d’un joint en siliconeInstaller la plomberie Sectionner les sangles de retenue de la pompe1019749-2-H Français-8 Kohler Co Du boÎtier de jonction Faire les connexions électriques Installer le kit de garniture de la baignoire à hydromassage Tester la baignoire à hydromassageTester la baignoire à hydromassage Nettoyage après installation Installer le bandeau optionnelCompléter l’installation en béton Compléter le mur/comptoir finiNettoyage après installation 1019749-2-H Français-14 Kohler CoModèles sans jets pour le cou Confirmer le bon fonctionnement17. Séquence d’opération Modèles avec jets pour le couProcédures de dépannage Séquence d’opérationSymptômes Causes probables Action recommandée Procédures de dépannage1019749-2-H Français-18 Kohler Co Kohler Co Français-19 1019749-2-H Avisos sobre el producto Información sobre el productoRequisitos eléctricos Acceso para las conexiones y el mantenimiento ContenidoCaracterísticas Información sobre el productoMás Antes de comenzarHerramientas y materiales Prepare el sitio Construcción de concretoPrepare la bañera de hidromasaje Construcción de maderaOpción que utiliza adhesivo de construcción Fije la bañera de hidromasaje al subpisoOpción que utiliza una lechada de cemento o mortero Opción que utiliza sellador de siliconaCorte las cintas metálicas que sujetan la bomba Instale la plomeríaInstale la almohada opcional Modelos sin jets para el cuello Realice las conexiones eléctricas Conexión de cableado típica para NorteaméricaRealice las conexiones eléctricas Pruebe el funcionamiento de la bañera de hidromasaje Instale el kit de guarnición de la bañera de hidromasajeInstale la almohada del jet para el cuello sólo Serie ″-N1″ Pruebe el funcionamiento de la bañera de hidromasaje Termine la instalación de concreto Instale el faldón opcionalTermine la cubierta/pared acabada Limpieza después de la instalaciónConfirme el funcionamiento correcto Secuencia de funcionamientoProcedimientos para resolver problemas Secuencia de funcionamientoProcedimientos para resolver problemas Síntomas Causas probables Acción recomendada1019749-2-H Español-17 Kohler Co Kohler Co Español-18 1019749-2-H 1019749-2-H 1019749-2-H Kohler Co
Related manuals
Manual 48 pages 30.08 Kb Manual 36 pages 60.55 Kb

K-1369, K-1110, K-1158, K-1014, K-1487 specifications

Kohler is renowned for its commitment to excellence and innovation in kitchen and bathroom fixtures. Among its impressive product lineup are several standout faucet models: the Kohler K-13468, K-1375, K-13469, K-13453, and K-13462. Each of these faucets is designed to elevate the functionality and aesthetic appeal of any space, combining modern design with cutting-edge technology.

The Kohler K-13468 is a sleek and sophisticated kitchen faucet that boasts a pull-down spray head for versatile usage. Its high-arc spout design offers ample clearance for larger pots and pans, making it an indispensable tool for any busy home chef. The K-13468 features Kohler's patented Reflex technology, which ensures smooth operation and secure docking of the spray head after use.

The K-1375 is an elegant bathroom faucet that merges form with function. It uses a single-handle operation, allowing precise control over water temperature and flow. The K-1375 is equipped with Kohler's ceramic disc valves that offer exceptional durability and prevent leaks, ensuring long-lasting performance. Its modern aesthetic can complement various bathroom styles, making it a versatile choice for many homeowners.

Another remarkable offering is the Kohler K-13469. This model is particularly distinguished by its high-performance water efficiency, meeting EPA WaterSense criteria. Its powerful spray options provide a satisfying experience without sacrificing water use, showcasing Kohler's commitment to sustainability. The K-13469 also features an integrated pull-down spray head, allowing users to transition easily between tasks.

The K-13453 is a testament to Kohler's innovative design philosophy. This faucet features a unique two-handle setup that allows for easy adjustments to water temperature and flow rate. Its sleek lines and polished finish make it a stylish addition to any sink, while its robust construction ensures it can withstand everyday use.

Finally, the Kohler K-13462 is a contemporary faucet that offers a versatile and stylish option for kitchens. With a minimalist spout design that balances elegance and practicality, it also incorporates the convenience of a pull-down sprayer. The K-13462 leverages Kohler’s advanced spray technology to provide multiple spray functions, making it suitable for everything from rinsing fruits to filling large containers.

In summary, the Kohler K-13468, K-1375, K-13469, K-13453, and K-13462 are exemplary products that embody Kohler's dedication to quality, innovation, and environmental responsibility. Each faucet combines stylish design with user-friendly features, making them sought-after choices for those looking to enhance their kitchen and bathroom spaces.