Jonsered FC 2145S manual KEY to Symbols

Page 2

KEY TO SYMBOLS

Symbols

WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

•A protective helmet where there is a risk of falling objects

•Hearing protection

•Approved eye protection

Max. speed of output shaft, rpm

Watch out for thrown objects and ricochets.

The operator of the machine must ensure, while working, that no persons or animals come closer than 15 metres.

Machines ﬁtted with saw blades or grass blades can be thrown violently to the side when the blade comes into contact with a ﬁxed object. The blade is capable of amputating an arm or leg. Always keep people and animals at least 15 metres from the machine.

Always wear approved protective gloves.

15 m 50FT

15 m 50FT

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Approved eye protection must always be used.

Wear sturdy, non-slip boots.

Only use non-metallic, ﬂexible cutting attachments, i.e. trimmer heads with trimmer cord.

Other symbols/decals on the machine refer to special certiﬁcation requirements for certain markets.

2 – English

Image 2

Contents Operator’s manual EPA KEY to Symbols SymbolsContents Introduction Dear customerWhat is WHAT? What is what on the clearing saw? BCWhat is what on the clearing saw? FC 2145, FC 2145 S General Safety Precautions Personal protective equipmentThrottle lock Machine′s safety equipmentStop switch Quick release Cutting attachment guardVibration damping system MufﬂerLocking nut Locking screwSharpening grass cutters and grass blades Cutting equipmentCutting equipment Sharpening the saw blade Trimmer headTransport position, handlebar AssemblyAssembling the handlebar and throttle FC 2145, FC 2145 SFitting blades and trimmer heads Fitting the blade guard and saw blade Fitting the trimmer guard and trimmer head Trimmy SIIStandard harness Adjusting the harness and clearing sawFitting other guards and cutting attachments Correct balance Adjusting the harnessVector harness Grass clearingFuel Fuel safetyFuel Handling Fueling MixingStarting and stopping Starting and StoppingCheck before starting Cold engineStarting StoppingGeneral working instructions Basic safety rulesWorking Techniques ABC of clearingForestry clearing using a saw blade Working methodsGrass clearing using a grass blade Brush cutting with a saw bladeGrass trimming with a trimmer head TrimmingMaintenance CarburetorAdjusting the start throttle speed BC Fine adjustment of the idle speed TCorrectly adjusted carburetor High speed jet HAir ﬁlter MufﬂerCooling system Drive shaft Cleaning the air ﬁlterBevel gear Spark plugTemperature 0C 32F or colder Winter useMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataApproved accessories Type Cutting attachment guard, Art. no Federal Emission Control Warranty Statement Your Warranty Rights and ObligationsPoly Trim 095-.130 Clic 35-50 NMPage Mm 9,0 m Mm 7,5 m Mm 6,0 m 15 cm 10 m 10 cm 15 cm Clic 1088930-95 ´z*x¶5¢¨ ´z*x¶5¢¨